• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.67-71
• /
• 2007

Recently, a health care need according to the increase of an advanced age population is increasing. The requirement about a health care monitoring is increasing rapidly from general people as well as patient. The requisition about a medical treatment technique and a medical treatment information service is the trend to be expanding. That can be possible minimizing the inconvenience of the patient to take a medical service and continuously monitoring the status of the patient to take a health care service. This paper discusses an implementation of wireless physiological signal monitoring system for health care. The system are composed of the sensor node and monitoring program. The sensor node has the physiological signal measurement part and the wireless communication part. The remote monitoring system has a monitoring program that are communicating the sensor node using bluetooth. The sensor node measured the ECG, pulse wave, blood pressure, Sp02, and heart rate.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.123-131
• /
• 2009

In this paper, we design ZigBee RF based framework for mobile web service on collected data by sensor node and transmitting data to data base by sensor network and remote sensing server through wireless connection. The proposed system is an integrated platform of sensor network for the sensor management and providing SOA based sensor web access. This paper combines SOA technology with sensor network. composes sensor node as web view, and provides high capability. extensiveness, reliability, and usability to the user who accesses to sensor web. The mobile message conversion module, SOAP message processing module. WSDL message generator, and mobile web service module is embodied for improving the capacity of the framework. The capacity evaluation of local wireless communication system which is proposed in this paper is analyzed through NS-2 simulation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.5
• /
• pp.28-37
• /
• 2007

IEEE 1451 standard defines an interface for network and transducer. In this paper, We propose an architectural model to configure data acquisition system and wireless smart sensor node based on IEEE 1451 standard. Proposed Network Capable Application Processor(NCAP) supports the task of data acquisition and communication for smart sensor node and network. The NCAP is able to reconfigure without interrupting the functionality of the wireless sensor node and receives the critical information of transducer using the DB. Smart sensor node is able to provide the basic information of sensor in digital format. This digital format is called Transducer Electronic Data Sheet(TEDS), is capable of plug-and-play capability of wireless sensor node and the NCAP. We simplify the format of TEDS and template to apply to wireless network environment. information of TEDS and template is transmitted using ad-hoc routing. This study system uses body temperature sensor and ECG(Electrocardiogram) sensor to provide the medical information service. The format of template is selected by data sheet of the sensor and reconfigured to accurately describe the property of the sensor. DB of NCAP is possible to register new template and information of the property as developing new sensor.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.124-126
• /
• 2006

Mobile Ad hoc networking is an emerging technology and in these days many applications are being developed to run on these networks. In these networks lookup services are very important because all nodes do not have same resources in term of memory and computing power. Nodes need to use different services offered by different servers. Reliable and efficient scheme should be available for lookup services due to limited bandwidth and low computing power of devices in mobile ad hoc networks. Due to mobility and rapid change in network topology, lookup mechanism used in wired network is not appropriate. Service discovery mechanism can be divided into two main categories Centralized and Distributed. Centralized mechanism is not reliable as there is no central node in these networks. Secondly centralized mechanism leads toward single point failure. We can handle the service discovery mechanism by distributing server's information to each node. But this approach is also not appropriate due to limited bandwidth and rapid change in network. In this paper, we present reliable lookup service scheme which is based on distributed mechanism. We are not using replication approach as well due to low bandwidth of wireless networks. In this scheme service discovery mechanism will be handled through different lookup servers. Reliability is the key feature of our proposed scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.1004-1010
• /
• 2019

In the EH-WSN (Energy harvesting wireless sensor network), a MAC (medium access control) protocol is required to select a relay node considering the power status of a node. Existing EH-WSN studies emphasize the power aspect, so it does not consider the QoS like the urgency of the sensed data. The required power and transmission delay must be changed according to the urgency so that the medium access control according to the data QoS can be performed. In case of relay node, relaying data without consideration of data urgency and node power may cause delay due to power shortage in case of urgent data. In this paper, we designed a MAC protocol that minimizes the power shortage that can occur during emergency data generation. For this, relay node requirements are set differently according to the urgency of data. The performance was analyzed through simulation. Simulation results show the reduced latency and improved reliability of urgent data transmission.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.638-648
• /
• 2013

Together with the GPS-based approach, geo-location through mobile communication networks is a key technology for location-based service. To save the cost, most geo-location system is implemented on the existed network service, which has a cellular structure. Still, multilateration is limited in cellular structure because it is difficult for the mobile terminal to acquire distance measurements from multiple base stations. This low hearability in the receiver is caused by co-channel interference and multipath environment. Therefore, hearability enhancement is necessary for multilateration under multipath and interference environment. Former time domain based hearability methods were designed for real signals. However, orthogonal frequency division multiplexing (OFDM) signal, which its usage has been increased in digital wireless communication, is a complex signal. Thus, different hearability enhancement method is needed for OFDM signals. This paper proposes a hearability enhancement method for forward-link multilateration using OFDM signals, which employ interference cancellation and multipath mitigation. A novel interference cancellation and multipath mitigation strategy for complex-valued OFDM signals is presented that has an iterative structure. Simulation results show that the proposed multilateration method provides the user's position with an accuracy of less than 80m through the mobile WiMAX cellular network in multipath environment.

• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.223-227
• /
• 2010

In this paper, we present a QoS-aware MAC protocol (QA-MAC) for cluster based wireless sensor networks (WSNs). QA-MAC is a TDMA-based scheduling protocol that minimizes the energy consumption in multi-hop WSNs and provides Quality of Service (QoS). A dynamic scheduling algorithm according to the number of member nodes, node traffics, and traffic priorities is suggested. The selected cluster head allocates time slots for all member nodes in the first TDMA schedule period of each round. During the second schedule period in each round, the cluster head makes a schedule for all data transmission. The proposed QA-MAC (QoS-Aware MAC) could save energy, reduce transmission delay, and support QoS.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.775-779
• /
• 2011

As the technology of multimedia sensor networks is desired in large numbers of applications nowadays, real-time service becomes one of the most important research challenges. Even though lots of related works have been conducted to meet this requirement in several ways, the specific traffic model for real-time has not been taken yet. Thus, it causes lack of adaptability of those approaches in real deployment. To solve this problem, in this paper, we model the application via (m,k)-firm streams which have weakly hard real-time property. And then, a novel forwarding scheme based on modified DBP (Distance-Based Priority) is proposed by considering local-DBP and stream DBP together. Local-DBP can contribute to identify the detailed causes of unsatisfied quality, that is, network congestion or wireless link failure. Simulation results reveal that (m,k)-firm is a good traffic model for multimedia sensor networks and the proposed scheme can contribute to guarantee real-time requirement well.

• Journal of Advanced Navigation Technology
• /
• v.12 no.5
• /
• pp.444-450
• /
• 2008

With the advancement of the mobile device and arrival of the integrated wired/wireless environments, the damand for services accessible by mobile devices is rapidly increasing. However, unlike existing wired networks, communication in wireless networks has many weaknesses. Therefore, research and development into an appropriate security technology has reached a critical stage, as combined wired/wireless environments emerge. Therefor, in this paper, we propose that device authentication technology in AAA (Authentication, Authorization, Accounting) mechanism of Mobile environment for secure service offer.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.273-278
• /
• 2007

In the next generation wireless mobile network, various methods are studied to offer interworking and mobility between various radio networks. To offer these harmoniously, network adaptation methods based on IP is generalized, and specifications of host-based mobility method with Mobile IPv4 and Mobile IPv6 to offer IP's mobility are defined in IETF specially. However, it is insufficient to satisfy quality of service that should be offered in wireless mobile network environment. Alternatively studies about Network-Based Mobility of Proxy Mobile IPv4, Proxy Mobile IPv6 etc. are preceded. This paper presents optimum plan that can offer mobility in the next generation radio transfer communication network by comparing and analyzing IP mobility methods divided by Host-based Mobility and Network-based Mobility.