• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.669-672
• /
• 2015

Recent Internet of Things (IoT, Internet of Things) that can be applied to various fields as the development of technology has been developed a lot of service and has been developed with the service also for crop management. To manage the essential elements of soil moisture in the crop growth but existing a direct person measuring the fluid point to carry the measuring instrument, if you take advantage of the WPAN (Wireless Personal Area Network) in this paper to manage sensor data, a fixed 3 points (30, 60, 90 cm) and can be managed can be scientifically analyzed the state of growth of the crop. Open field environment is utilized as it is less disturbance of the interference and the frequency of the radio frequency signal of the structure provides a relatively comfortable environment. Therefore, WPAN building and data transmission scheme of the minimum cost is to be developed. In addition, the operation to enter low power mode, the algorithm is necessary because a lot of restrictions on the power supply applied to the sensor nodes and the gateway is constructed in the open field. In the experiment, verifying the effectiveness by using a network configuration of each of the sensor nodes and the gateway, and provides a method for time synchronization of the operation and a low power mode. The study protocol for the RF communication with the LoRa and to enhance communication efficiency is needed in the future.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.54-75
• /
• 2011

PoC(Push-to-talk Over Cellular) is an integrated technology of group voice calls, video calls and internet based multimedia services. If a PoC user can not participate in the PoC session for various reasons such as an emergency situation, lack of battery capacity, then the user can use the PoC Box which has a similar functionality to the MM Box in the MMS(Multimedia Messaging Service). The RTSP(Real-Time Streaming Protocol) method is recommended to be used when there is a transmission session between the PoC box and a terminal. Since the existing VOD service uses a wired network, the packet size of RTSP-based VOD service is huge, however, the PoC service has wireless communication environments which have general characteristics to be used in RTSP method. Packet loss in a wired communication environments is relatively less than that in wireless communication environment, therefore, a buffering latency occurs in PoC service due to a play-out delay which means an asynchronous play of audio & video contents. Those problems make a user to be difficult to find the information they want when the media contents are played-out. In this paper, the following techniques and methods were proposed and their performance and superiority were verified through testing: cross-over dual reception buffering technique, advance partition multi-reception buffering technique, and on-demand multi-reception buffering technique, which are designed for effective picking up of information in media content being transmitted in short amount of time using RTSP when a user searches for media, as well as for reduction in playback delay; and same-priority packetization transmission method and priority-based packetization transmission method, which are media data packetization methods for transmission. From the simulation of functional evaluation, we could find that the proposed multiple receiving buffering and packetizing methods are superior, with respect to the media retrieval inclination, to the existing single receiving buffering method by 6-9 points from the viewpoint of effectiveness and excellence. Among them, especially, on-demand multiple receiving buffering technology with same-priority packetization transmission method is able to manage the media search inclination promptly to the requests of users by showing superiority of 3-24 points above compared to other combination methods. In addition, users could find the information they want much quickly since large amount of informations are received in a focused media retrieval period within a short time.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.95-99
• /
• 2003

In addition to wired communication technology, wireless communication technology has had communication revolution nowadays. Bluethooth technology carries out data/voice communication within pico-net. Nowadays the various services are supported by access network connected to public network. This paper presents implementation of bluetooth protocol analyser which simulates bluetooth protocol. MS window98 and visual C are used for development environment and application program is operated over the firmware loaded on the bluetooth device connected to the PC through UART which of the maximum transmission rate is 115kbps because transmission rate less than 20kbps affects rarely the performance. The performance analysis on the propose system is carried out as simulating the signalling information for the voice test and the traffics between two bluetooth systems for file transfer. The throughput analysis for file transfer service and call processing capacity for voice service are considered as performance analysis parameters. File access time is very important parameter and throughput is 13 kbps in case breakpoint time to file access is 0.04sec. Also call processing time is about 16.6ms in case of communication with the headset. The performance analysis of simulation results satisfies with bluetooth device development.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1493-1504
• /
• 2010

The localization service which provides the location information of mobile user, is one of important service provided by sensor network. Many methods to obtain the location information of mobile user have been proposed. However, these methods were developed for only one mobile user so that it is hard to extend for multiple mobile users. If multiple mobile users start the localization process concurrently, there could be interference of beacon or ultrasound that each mobile user transmits. In the paper, we propose LME, the localization technique for multiple mobile nodes in mobile wireless sensor networks. In LME, collision of localization between sensor nodes is prevented by forcing the mobile node to get the permission of localization from anchor nodes. For this, we use CTS packet type for localization initiation by mobile node and RTS packet type for localization grant by anchor node. NTS packet type is uevento reject localization by anchor node for interference avoidance.nghe experimental result shows that the number of interference between nodes are increased in proportion to the number of mobile nodes and LME provides efficient localization.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2011

The parking guidance system can increase driver's convenience with detailed parking information service, but it continuously consumes electrical energy with large amount of sensors, displays and control modules. With the increase of the demand for green and sustainable building design, it becomes a meaningful issue for parking guidance system to reduce operating power. This paper presents the preliminary design and estimated results of a parking guidance system which is optimized to reduce the power consumption mainly on detectors and displays. The system design is based on commercial wireless parking detectors, wireless-loop-detector and earth-magnetic-detector. We have performed system architecture design, communication network design, parking information service scenario planning, battery life regulation and at last operating power estimation. With the 7 years of battery replace cycle, the estimated result for power consumption of designed system was 0.33W/slot, which is 13% of the traditional system's estimation result. The estimated annual maintain cost was similar to the traditional ultrasonic sensor based system's. The low power operable designed system can be expected to reduce CO2 emission.

• Journal of Internet Computing and Services
• /
• v.16 no.3
• /
• pp.1-11
• /
• 2015

WBAN(Wireless Body Area Network) operating around the human body aims at medical and non-medical service at the same time. and it is the short-range communication technology requiring low-power, various data rate and high reliability. Various studies is performing for IEEE 802.15.4, because IEEE 802.15.4 can provide high compatibility for operate WBAN among communication standard satisfiable these requirements. Meanwhile, in the case of coexisting many IEEE 802.15.4-based WBAN, signal interference and collision are the main cause that is decreasing data reliability. but IEEE 802.15.4 Standard does not consider about coexistence of many networks. so it needs improvement. In this paper, To solve about this problem, identify coexistence problem of IEEE 802.15.4-based WBAN by preliminary experiments. and propose a scheme to mitigate the reliability decrease at multiple coexistence WBAN. The proposed scheme can be classified in two steps. The first step is avoidance to collision on the CFP through improving data transmission. The second step is mitigation collision through converting channel access method. Proposed scheme is verified the performance by performing comparison experiment with Standard-based WBAN.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.257-264
• /
• 2012

In this paper, we propose a Route Stability-based Direction Guided Routing protocol(RSDGR) in mobile ad-hoc wireless networks. The main features and contributions of the proposed routing protocol are as follows. First, it can calculate link stability between two nodes as well as route stability of multi hop quantitatively by using nodes' mobility. And this protocol can establish the most stable path between a source node and a destination node. Second, according to the route stability between a source node and a destination node, it can control and optimize the direction guided region dynamically for route setup. Third, we suggest theoretical model for quantitative calculation of link stability between two nodes and route stability of multi hop path. The performance evaluation of the proposed routing protocol is performed by simulation using OPNET(Optimized Network Engineering Tool) and theoretical analysis. The results of performance evaluation show that the patterns of PDR are similar in simulation and analysis according to route stability. The faster mobile nodes' velocity and the smaller source node's direct guided reigion, the lower route stability and PDR and the higher delay and control overhead related to this.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1883-1890
• /
• 2013

Location detection technology (LDT) is one of the core techniques for location based service (LBS) in wireless communication for improving resource management and quality of services. The location of a mobile station (MS) is estimated using the time of arrival (TOA) technique based on three circles with centers corresponding to coordinates of three base stations (BSs) and radius corresponding to distances between MS and BSs. For accurately estimating the location of MS, three circles should meet at a point for the trilateration method, but they generally do not meet a point because the radius is increased depending on the number of time delay for estimating the distance between MS and BS and the carrier frequency. The increased three circles intersect at six points and the three intersection points among them should be generally placed close to coordinate of the location for the specific MS. In this paper, we propose the shortest distance algorithm for TOA trilateration method, to select three interior intersection points from entire six points. The proposed approach selects three intersection points with the shortest distances between coordinates of MS and intersection points and determines the averaged coordinate of the selected three points, as the location of the specific MS. We demonstrate the performance of the proposed algorithm using a typical computer simulation example.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.4
• /
• pp.193-204
• /
• 2016

Objective: This study carried out base research to build an agricultural safety monitoring system through ICT convergence to reduce safety accidents and enhance welfare in life in the agricultural field. Background: The functions and values of rural villages as the space of living are recognized anew, but occupational accident rate due to farm work accidents is on the rise each year. Therefore, the seriousness of such a problem emerges. The convergence technology combining ICT is recently applied to industries overall, and therefore better services are offered. However, studies on ICT convergence has not yet been applied to the agricultural safety field. Method: This study identified ICT convergence service technology trends and representative serious accident types mainly occurring in agricultural activities. This study defined the major factors of farm work accidents and ICT to solve those accident factors including the sensor technology, wired/wireless communication technology and location information service, and applied them to prototype PCB for the development of an agricultural safety monitoring system. Results: This study proposed an emergency monitoring system for farmers and a harmful environment monitoring system. The ICT technology to prevent farm work accidents can be summarized as sensing technology, ICT and network technology and user interface technology. This study also designed PCB module configuration and situation judgment algorithm as basic research for proposed monitoring system development. Conclusion: The ICT-based agricultural safety monitoring research proposed in this study is expected to become the basis to build a future real time monitoring system, and also is expected to contribute to social safety and welfare service improvement for farmers. Application: The ICT convergence farmer accident prevention system will make contributions to the prevention of serious farm work accidents.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.228-238
• /
• 2003

We believe that existing wire solutions such as HomePNA2.0 using phone lines and HomePlug using power line and wireless solution such as HomeRF are the most promising solutions, because of its cost-effectiveness. However, MAC protocols of these solutions provide only Class of Service(CoS) using priority mechanism like HomePNA and HomePlug or consider only voice among real-time traffics like HomeRF. For these reasons, we perceive the needs of the new MAC protocol which is no new wire solution and provides guaranteed Quality of Service (QoS) for not only voice but also video and audio. In light of this, we present the design and software implementation of a new MAC protocol for Home Networks. Our evaluation results of software implementation verify that proposed MAC protocol can provide low delay, low loss, and low jitter to real-time traffic by reserving bandwidth.