• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.354-359
• /
• 2016

Power plants maintenance data is to be sent to management server system via a communication network. In this case, reliable communication network is required. Transmission of the power plants maintenance data is used in the wired communication network or wireless communication network. PLC communication network is a kind of wired communication network. However PLC communication network is easily affected by noise. On the vulnerable areas in power line system, such as a mountain or rural areas, it is difficult to form a power line communication network. For a wireless communication, environment are also influenced factors in wireless communication. Harsh environmental factors are bring the communication characteristic degradation. In such areas it can be used a combination of two networks and in this way the complementary function can be achieved. Power plants are distributed in various regions across the country. The appropriate communication network is needed to maintain the power plant.This study investigated the effect of environment on the wired communication and wireless communication. It would examine a variable factor which is affect to the communication characteristic. We used PLC communication for wired communication network and ZigBee communication for wireless communication network. We investigated the characteristics of a single communication network and it raised the need for a complex communication technology to complement a single communication network.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.243-245
• /
• 2004

This paper proposes design and implementation for Seamless Handoff method between adapters in a system environment where both wired and wireless adapters are present First of all, by settingLayer 2 address of wired adapter to Layer 2address of wireless adapter, then generate virtual adapter on the above layer to make these two adapters operate on an IP address. Under the condition, when wired communication via the wired adapter gets disconnected while in service, wireless handoff occurs by mapping information on the wireless adapter to the virtual adapter. According to the method proposed in this paper, continuous session can be obtained even when handoff between wired and wireless adapters occurs at lower level in an application where both IP address and Port address are used to maintain session since If address does not change.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.243-245
• /
• 2005

This paper presents a wired and wireless linked remote control system. Ethernet based network communication is used for long distance management and 2.4GHz RF network is adopted for the local area communication between the main network and the ballast. For the effective remote control and management including dimming using wired and wireless linked digital communication networks, control circuit of the ballast is implemented with fully digital circuit using MCU and EPLD. In this paper, the proper frame structure is proposed for the digital-remote lighting-control system and the detailed system configurations including fully digital controlled ballast for the induction lamp are described.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.285-291
• /
• 2014

Recent, development of wireless communication devices are rapidly and these device being deployed to the user very fast. By this results, a wired network device and the new device such as wireless devices incorporate. Then a demand of new mesh network is rapidly growing. In this wired/wireless integrated network environment, the network is configured automatically, and a user or wireless communication devices must be provided for authentication services. But, these services do not in the real world. Therefore, in this paper, we propose that wired/wireless integrated network environment to automatically configure the network using OpenFlow and the authentication system using Kerberos method. Our proposed system to be able to provide authentication services, confidentiality, integrity services for user or wired/wireless communication devices. And it can be prvented as well to man-in-the-middle attacks.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.1
• /
• pp.51-55
• /
• 2008

A digital home is a ubiquitous environment that is expected to be realized in the near future. All information appliances in a house are connected to each other through wired and/or wireless home networks. Authenticated user can access the various services provided by the digital home, and the access is not restricted by equipment, time, or location. The technologies that form the digital home can be grouped into two categories: wired networking technologies and wireless networking technologies. For the purpose of ubiquitous environments, wireless-networks offer suitable and seamless high-quality services. A wireless LAN can be created simply by equipping a single access point. For that reason, the cost of establishing such a network is low and using it is easy. Of course, there is an exciting new wireless technology. It is the Ultra Wide Band (UWB). However, it is not enough to bring wireless convenience, although offering a broad range of high-speed data transfer capabilities, Because of unstable. Thus, of the wireless-networking systems, we focus on the wireless LAN. We quantitatively analyze its capabilities. The dynamic and adaptive wireless LAN provides a foundation for the evolution toward the next generation of wireless and adaptive networks. The difference between wired LAN and wireless LAN in upload and download rates is small. Although the wireless LAN experiences a greater loss rate than the wired LAN, the difference is minimal. We conclude that a wireless LAN is suitable for use in an apartment environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1933-1941
• /
• 2016

This paper compares the performance of wireless communication technologies to replace the wired networks by wireless networks on avionics intra-communication. Due to the drawbacks of wired network, such as complexity, weight, maintenance cost and scalability, it leads to the high data rate and network traffic demands of avionics systems. Therefore, in WAIC(Wireless Avionics Intra-Communications) system suggested by ITU(International Telecommunication Union), based on environment of avionics system and requirements of a wired network, wireless network structures are defined to solve the problems of wired networks. In this paper, we consider features, advantages and disadvantages of wireless communication technologies which can be used for wireless avionics network, and we propose suitable wireless communication technology candidates for wireless avionics networks in WAIC environments.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.4
• /
• pp.309-315
• /
• 2018

Currently, the commercialization of the $5^{th}$ Generation (5G) service is becoming more prevalent in domestic communication network technology. This has reduced communication delay time and enabled large-capacity data transmission and video streaming services in real-time. In order to keep pace with these developments, K-water has introduced a smart process control system in water purification plants to monitor the status of the water purification process. However, since wireless networks are based on the public Long Term Evolution (LTE) network, communication delay time remains high, and high-resolution video services are limited. This is because communication networks still have a closed structure due to expense and security issues. Therefore, with 5G in its current form, it is very difficult to accommodate future services without improving the infrastructure of its communication networks. In recognition of these problems, this study implemented the authentication and management function of wireless networks on a wired network management system in the K-water Bansong water purification plant. The results confirmed that wired Local Area Network (LAN) services give a higher security performance than an expensive commercial wireless LAN system. This was achieved by using an Internet Protocol (IP) address management system of wired networks and the packet filtering function of the Layer2 (L2) switch. This study also confirmed that it is possible to create a wireless LAN service that is 3.7 times faster than the existing LTE communication network.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.13-17
• /
• 2004

As the usage of wireless LAN becomes common in working environment, the number of database systems that support both wired and wireless users increases rapidly. The characteristics of wireless LAN that its speed is slow relatively comparing to wired network and the users in its environment connects to different communication points as they moves creates another challenge to be resolved in database systems. In the environment of hybrid communication systems, wired and wireless for voluminous data amount and a number of users, the two layer architecture of the conventional client-server database systems has limitation in the system performance. This is due to that server is the only point of data service in client-server database systems. In this paper, we discuss a new extended database system architecture that data services are distributed among servers and clients based on user database access patterns in order to improve system performance. We analyze the expected system performance by using simulation technique and prove the practical utilization of the system by demonstrating experimental results.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.609-614
• /
• 1999

Our present ability to work with video has not been confined to wired communication environment. This paper describes the new technological trend of wireless video communication. In wireless video communication, unlike wired network, several techniques are needed. At first, error robust video coding is essential. Due to characteristics of wireless channel, the system is exposed to more error prone environment. In addition, encoded video bit streams are vulnerable to the error because of the entropy coding. Recently many frameworks are developed to cope with this problem. We just explore the numerous robust video coding approaches with the viewing of error control. And more we discuss other on going research topics in this wireless video communication fields like low-power assumption design, trans-codec technique, and rate control schemes in brief.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.652-658
• /
• 2000

Wired and wireless communication technique is growing rapidly. As the number of communication users is larger problems such as network congestion and signal interference between users are getting most important, There have been researches that try to solve them by control theoretic approaches. They apply various control theories to the control issues of communication. this paper surveys these researches and classifies them into ATM TCP/IP and wireless communication according to the target. The feedback control model of each communication protocol is shown and related researches are summarized and analyzed.