• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.797-806
• /
• 2009

The Multichannel Analyzer for Transient and steady-state in Rod Array - Liquid Metal Reactor for Flow Blockage analysis (MATRA-LMR-FB) code for the analysis of a subchannel blockage has been developed and evaluated through several experiments. The current version of the code is improved here by the implementation of a distributed resistance model which accurately considers the effect of flow resistance on wire spacers, by the addition of a turbulent mixing model, and by the application of a hybrid scheme for low flow regions. Validation calculations for the MATRA-LMR-FB code were performed for Oak Ridge National Laboratory (ORNL) 19-pin tests with wire spacers and Karlsruhe 169-pin tests with grid spacers. The analysis of the ORNL 19-pin tests conducted using the code reveals that the code has sufficient predictive accuracy, within a range of 5 $^{\circ}C$, for the experimental data with a blockage. As for the results of the analyses, the standard deviation for the Karlsruhe 169-pin tests, 0.316, was larger than the standard deviation for the ORNL 19-pin tests, 0.047.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.11 no.2
• /
• pp.178-184
• /
• 2000

Laryngeal evoked EMG is the objective and quantitative method to measure the innervation of laryngeal muscle. If there is a mobility disorder of vocal cords, the cause and location of neural lesion co be understood by the laryngeal evoked EMG and if there is a vocal cord paralysis, the degree of recovery and the policy of treatment can be determined by it. Recently, the studies of reinnervation after recurrent laryngeal nerve injury have been actively carried out. Laryngeal evoked EMC is useful to these studies. The aim of study is to know whether noninvasive methods for stimulating the recurrent laryngeal nerve and for recording of compound action potential(CAP) using surface electrode are as useful as the invasive method using needle electrode. We obtained EMG of laryngeal muscle by various stimulating and recording methods : 1) Direct nerve stimulation by placing nerve cuff electrode made out of silastic tube and platinum wire and recording by insertion of hook wire electrode into posterior cricoarytenoid(PCA) and thyroarytenoid(TA) muscles, respectively. 2) Recording of compound action potential by surface electrode after stimulation of recurrent laryngeal nerve by the insertion of 27 gauge of needle electrode. 3) Recording of compound action potential by surface electrode after stimulating the recurrent laryngeal nerve by transcutaneous blunt rod electrode at tracheoesophageal groove. The amplitude, duration and latency of the CAP evoked by recurrent laryngeal nerve stimulation were compared among the three groups. The amplitude of CAP was smallest in the group recorded from posterior cricoarytenoid and hyroarytenoid muscle, and that recorded by surface electrode after stimulation by needle electrode was largest. The difference in amplitude between the group by hook wire recording and the two groups by surface electrode recording was significant statistically. There is no significant difference in duration and latency among three groups. Since the waveform of CAP from all three methods has similar duration, latency, we concluded that noninvasive method is a useful as invasive methods.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.1
• /
• pp.25-33
• /
• 2007

The investigation has been made into the prediction of heat exchange performance of a counter flow type double-tube condenser for natural refrigerant mixtures composed of Propane/n-Butane or Propane/i-Butane in a smooth tube and micro-fin tube. Under various heat transfer conditions, mass flux, pressure drop and heat transfer coefficient of the mixed refrigerants were calculated using a prediction method, when the length of condensing tube, total heat transfer rate, mass flux and outlet temperature of coolant were maintained constant. Also, the predicted results were compared with those of HCFC22. The results showed that the mixed refrigerants of Propane/n-Butane or Propane/i-Butane could be substituted for HCFC22, while the pressure drop and overall heat transfer coefficient of the refrigerants were evaluated together.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.59-59
• /
• 2003

ZnO는 상온에서 3.37 eV의 넓은 밴드갭을 가지는 직접천이형 반도체이다. 상온에서 60 meV의 큰 엑시톤 결합에너지를 가짐으로 인해 엑시톤 재결합에 의한 강한 UV 레이저 발진효과를 기대할 수 있다. 이러한 장점을 갖는 ZnO 박막을 이용하여 광소자 등에 응용하기 위하여 양질의 ZnO 박막성장이 필수적이며, 이를 위해 MBE, MOCVD, PLD, rf magnetron sputtering 등 다양한 증착방법을 통한 연구결과가 보고되고 있다. 또한 p형 불순물인 As과 N 도핑 및 Ga과 N의 co-doping 방법 등을 통하여 p형 ZnO 박막을 제조하였음이 보고되고 있으나 재현성 문제 등으로 인해 계속적인 연구가 진행되고 있다. 본 연구에서는 MOCVD를 이용하여 A1$_2$O$_3$(0001) 기판 위에 ZnO 박막을 성장시켰다. Zn 전구체로 DEZn을 사용하였으며, 산소 source로 $O_2$를 사용하였다. 증착온도, Ⅵ/II 비율, 반응기 압력 등 MOCVD의 중요한 공정변수들의 체계적인 변화에 따른 박막성장 양상을 조사하였다. 증착 조건에 따라 ZnO 입자의 모양이 주상(column), nano-rod, nano-needle, nano-wire 등으로 급격하게 변화됨을 확인하였으며, 이러한 입자의 모양과 결정성장 방향 및 광학적 특성과의 상관관계의 해석을 시도하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.621-621
• /
• 2013

ZnO는 수열합성법을 사용하여 저비용으로 일차원 형태의 잘 정렬된 nanowire의 제작이 가능하며 높은 화학적, 열적 안정성을 가져 전계 방출 소자로써 많은 연구가 진행되고 있다. 본 연구는 수열합성법에 사용되는 ZnO 전구체(Zinc Nitrate, HMTA, PEI & Ammonium Chloride), 안정제(Ethanolamine)의 농도에 따른 ZnO의 형상 변화와 이에 따른 전계방출 특성을 비교 분석하였다. 전구체의 농도 변화에 따라 ZnO Film, Rod, Tip과 같은 형상 변화를 확인 할 수 있었으며, 안정제를 사용함으로써 고종횡비를 가지는 ZnO Tip을 제작하였다. 제작된 ZnO 에미터의 전계방출특성을 고진공 챔버에서 측정하였고, 에미터 형상이 전계방출에 미치는 영향을 비교 분석하였다.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.1
• /
• pp.43-50
• /
• 2007

Reheating furnace is an essential facility of a rod mill plant where a billet is heated to the required rolling temperature so that it can be milled to produce wire. Although it is very important to obtain information on billet temperatures, it is not feasible during furnace operation. Consequently, a billet temperature profile should be estimated. Moreover, this estimation should be done within an appropriate time interval for an on-line application. In this paper, a billet heat transfer model based on 2D FEM(Finite Element Method) with spatially distributed emission factors is proposed for an on-line billet temperature estimation and also a measurement is carried out for two extremely different furnace operation patterns. Finally, the difference between the model outputs and the measurements is minimized by using a new optimization algorithm named uDEAS(Univariate Dynamic Encoding Algorithm for Searches) with multi-step tuning strategy. The obtained emission factors are applied to a simulation for the data which are not used in the model tuning for validation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.486-486
• /
• 2011

금속산화물을 제조하는 방법으로 수열반응은 wire, rod, needle, lamella, flower등 다양한 형상을 화학적으로 합성하는데 널리 이용된다. 또한 금속산화물의 특성은 구조와 형상에 의존하고, 구조와 형상에 따라 촉매, 기능성 첨가제, 초전도체등에 다양한 분야로 사용되어진다. 본 연구는 수열방법으로 각 물질의 염화물과 암모니아수를 출발물질로 사용하였고, ionization 제어를 위해 염화암모늄을 사용하여 각 물질의 전구체를 합성하였다. 형성된 각 물질의 전구체는 열분해를 통해 산화물로 제조하였다. 이들 입자의 형상 및 특성을 확인하기 위해 SEM, XRD, FT-IR, Raman을 사용하여 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2005-2007
• /
• 2000

KEPCO 765 kV Transmission Lines where seasonal winds intersect to the direction of the transmission line route cause aeolian complaints from residents near the transmission lines due to 1.5 times sub-conductors numbers and about 2 times of tower height comparing 345 kV transmission lines. To decrease the wind noise generation, KEPRI developed two countermeasures. One is to install the Spiral Rod on wired 765 kV Cardinal conductor. The other method is to wire the Low Noise conductor which has salient part on the surface.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.148-153
• /
• 2013

It is important to improve the efficiencies of motors to overcome problems such as decreasing energy reserves and environmental pollution. Superconductors are promising for developing high-efficiency motors. However, superconducting wires must be kept in critical conditions and the AC loss needs to be minimized. In this paper, a design of a superconducting interior permanent magnet synchronous motor (IPMSM) is proposed that reduces the AC loss. The characteristics of superconducting and normal-conducting IPMSMs are compared. The proposed superconducting IPMSM has a low AC loss and a very high efficiency at low speeds.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.65.5-65
• /
• 2001

In this study, we have designed and fabricated the slidacs type automatic voltage regulator(AVR) that is able to control the output voltage continuously according to road variation. Especially, the frictions between the surface of contact of the slidacs coils and the output wire moving rod are reduced by transforming the mechanical configuration of surface of contact of slidacs from the conventional sliding one into the proposed rotary one composed of cylindrical bearing. Thus, the slidacs type AVR using cylindrical bearing proposed in this study has less noise than conventional one owing to the reduction of frictions, and its breakdown ratio caused by the abrasion of contact materials is reduced. Furthermore, ...