• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
• /
• pp.1-8
• /
• 2000

Automotive electronics as we know it today encompasses a wide variety of devices and systems. Key to them all, and those yet to come. is the ability to sense and measure accurately automotive control parameters. In other words, sensors and actuators are the heart of any automotive electronics application. The important of sensors and actuators cannot be overemphasized. The future growth of automotive electronics is arguably more dependent on sufficiently accurate and low-cost sensors and actuators than on computers, controls, displays, and other technologies. Without them, all of controls system - engine. transmission. cruise, braking, traction, suspension, steering, lighting, windshield wipers, air conditioner/hearter - would not be possible. Those controls, of course, are key to car operation and they have made cars over the years more drivable, safe, and reliable. In this lecture, the principle and future trends of electronic control gasoline engine will be discuss.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.88-93
• /
• 2004

In general, a fundamental structural design consideration for an automobile is the overall dynamic behavior in bending and torsion. Dynamic behavior of the automobile are mainly influenced by the structural stiffness of B.I.W.(body-in-white) and the physical property of trim components. In this paper, the modeling techniques for various trim components of middle-sized bus are presented, and the dynamic effects of the trim components on the vibration characteristics of the bus are investigated. The $1^{st}$ torsional frequency is decreased by attaching windshield and backlite to the B.I.W., but the $1^{st}$ vertical bending frequency and the $1^{st}$ lateral bending frequency are increased. The natural frequencies of the bus are decreased by attaching doors and windows. And also, the natural frequencies of the bus are large decreased by attaching seats, instrument panel etc. The study shows that the dynamic characteristics of the bus can be effectively predicted in the initial design stage.

• International Journal of Aeronautical and Space Sciences
• /
• 제1권2호
• /
• pp.17-21
• /
• 2000

In order to correct the strut interference in wind tunnel tests, image methods are conventionally used. Because of their excessive extra runs, some alternatives have been tried to reduce the extra runs. In this study, these alternatives were reviewed and checked by the strut interference evaluation with the panel code, CMARC. The present work shows that the strut interference is free from neither model configuration nor model attitude. This dependency makes the alternatives to the image method unfeasible. The 3-run image method was also evaluated. It worked well even for the exaggerated windshield. At this point, reducing the image runs by neglecting parameters affecting minor influence would be best.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.569-569
• /
• 2014

The interior vehicle noise due to the exterior aerodynamic field is an important topic in the acoustic design of a car. The air flow detached from the A-pillar and impacting the side windows are of particular interest as they are located close to the driver / passenger and provides a lower insulation index than the trimmed car body parts. This paper presents a numerical analysis method for a simplified vehicle model. The internal air cavity including trim component are included in the simulation. The car body includes the windshield and two side windows. The body is made of aluminum and trimmed with porous layers. The methodology proposed in this paper relies on two steps: the first step involves the computation of the exterior flow and turbulence induced non-linear acoustic field using CFD Code. The second step consists in the computation of the vibro-acoustic transmission through the window using the finite element vibro-acoustic solver Actran.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.210-215
• /
• 2001

The pole antenna of vehicles for AM/FM radio broadcasting receptions has many probems, such as damageable mechanical system and noise etc. It is considered that noise is composed of the structural vibration noise and the air flow induced aerodynamic noise. Also we find out that the setting process of a printed on-glass automobile antenna has many difficulties. Recently, the above mentioned problems can be reduced by employing enhanced wiper antenna which utilizes the windshied wiper arm. The new system is a passive antenna. In this study, experiments for the characteristics of a wiper antenna by measuring the SWR, radiation pattern and received powe have been carried out. The experimental results show that the efficiency of the wiper antenna has better performance than any other antenna.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.27-32
• /
• 2007

Head-Up Display system makes it possible for the driver to be informed of important vehicle data such as vehicle speed, engine RPM or navigation data without taking the driver's eyes off the road. Long focal length optics, LCD with bright illumination, image generator and vehicle interface controllers are key parts of head-up display system. All these parts have been designed, developed and applied to the test vehicle. Virtual images are located about 2m ahead of the driver's eye by projecting it onto the windshield just below the driver's line of sight. Developed head-up display system shows satisfactory results for future commercialization.

• 한국재료학회지
• /
• 제6권6호
• /
• pp.618-625
• /
• 1996

고주파 마그네트론 스퍼터링(RF magnetron sputtering)법을 이용하여 자동차유리 성에 제거용 주석첨가 인듐산화물(indium tin oxide;ITO) 투명저항박막의 증착과 그 전기 및 광학 특성을 연구하였다. 기판온도는 A, T.-30$0^{\circ}C$, O2/(Ar+O2)비는 0-0.3로 변화시키며 실험하였다. 기판온도가 높아질수록, 그리고 O2/(Ar+O2)비가 높아질수록 박막의 증착속도는 감소하였다. 또한, 기판온도가 높아질수록 In2O3(400) 방향의 결정성은 감소하고, In2O3(222)와 (400) 피크만이 잔존하였다. 기판온도가 높아질수록 가시광영역의 광투과도는 향상되었고, 면저항은 20$0^{\circ}C$까지는 감소하였으나 20$0^{\circ}C$이상에서는 거의 일정하였으며, 결정립 크기는 온도가 높아질수록 증가하였다. 박막의 면저항은 O2/(Ar+O2)비가 0.1에서는 감소하고, 그 이상에서는 증가하였으며, 광투과도는 O2/(Ar+O2)비에 거의 영향을 받지 않았다.

• Elastomers and Composites
• /
• 제55권4호
• /
• pp.257-262
• /
• 2020

Vehicle wiper blades are typically treated with chlorine to lower their friction coefficient with the windshield surface. In this study, a chlorinated, natural rubber (NR) vehicle wiper blade was characterized using a pyrolytic technique. Unchlorinated and chlorinated wiper blades were pyrolyzed and the pyrolysis products were analyzed using gas chromatography/mass spectrometry (GC/MS). Besides isoprene and dipentene, the other principal pyrolysis products such as 1,5,8-p-menthatriene (MTT) and p,α-dimethylstyrene (DMS) were observed. The MTT and DMS ratios did not vary for the chlorinated nor unchlorinated samples when the entire rubber lip of the wiper blade was pyrolyzed. However, when only the lip surface of the wiper blade rubber was pyrolyzed (via scratching with a knife) the relative ratios of the chlorinated sample were much greater than those of the unchlorinated sample. As MTT is produced from the conjugated backbone of chlorinated NR that forms through HCl elimination during initial pyrolysis, and DMS is generated by the dehydrogenation of MTT, these two products could be used as markers for detecting chlorinated NR.

• 감성과학
• /
• 제16권2호
• /
• pp.195-206
• /
• 2013

교통사고의 주된 원인은 자동차 주행 중 운전자의 시각적 주의 분산이다. 본 연구에서는 운전자의 시선을 도로에서 벗어나지 않게 하면서 주행정보를 제공하는 HUD(Head Up Display)시스템을 이용해서 자동차 앞 유리(windshield)에 투영된 주행정보의 색채감성을 평가하였다. 주행정보는 전방시선 $0^{\circ}$에서 약 하방 $9^{\circ}$에 위치하도록 설치하였고, 실험실의 형광등, 5개의 LED 조명등과 TV출력 영상을 통해 25[lux]의 야간 운전 시 조도 환경, 100,000[lux]의 주간 운전 시 조도 환경을 재현하였다. 먼셀 표색계의 기본 5색(R, Y, G, B, P)과 신호등의 색 YR, W 총 7색의 단일 색과 W를 제외한 6개 글자에 각각 흰색 글자 외곽선, 회색 글자 외곽선을 주어 외곽선 있는 글자 12개를 만들었다. 총 19개의 실험 자극물을 주간과 야간 환경에서 각각 주행정보의 컬러 시인성, 피로도, 선호도, 방해 정도를 평가하였다. 실험결과는 시인성이 유의미하게 나왔는데, 첫째, 주간에서는 Y와 G 색상같이 색상 자체의 휘도가 높은 경우 시인성이 높았다. 둘째, 텍스트의 외곽선이 있는 경우, 외곽선이 배경색으로 작용하여 색상과의 휘도대비를 일으켜 시인성에 영향을 준다. 셋째, 외곽선이 없는 경우에는 차량 전면 유리의 휘도가 배경색 휘도로 작용하여 글자의 휘도와 큰 대비를 이룰 때 시인성이 높은 것으로 나타났다. 이처럼 운전자의 주시야를 고려해 전방에 제공되는 가상의 영상, HUD의 상용화를 위해서는 주행정보의 색채시인성이 중요한데 이를 높이기 위한 방안으로 배경과 글자의 휘도대비를 고려해볼 수 있다.

• 대한기계학회논문집B
• /
• 제35권2호
• /
• pp.161-168
• /
• 2011

HVAC(Heating, Ventilating, Air Conditioning) 시스템은 승객실 내부의 열환경을 제어하여 쾌적성을 향상시키거나 전면 유리창에 생성된 성에를 제거하여 운전자의 가시영역을 확보하는 등 차량의 성능과 관련된 매우 중요한 기능을 담당한다. 본 연구에서는 CFX 를 사용하여 HVAC 시스템의 기능 중 제상 덕트의 성능과 관련된 수치해석적 연구를 수행하였다. 제상덕트의 해석결과, 출구에서의 유량배분특성 및 유동구조는 일반적인 설계주안점에 부합된 양호한 결과를 얻었다. 외부온도 $-18^{\circ}C$ 하에서 물의 잠열인 $3.37{\times}10^5$[J/kg]을 고려한 상변화 과정을 수치적으로 모사하기 위하여 열용량법을 사용하였고, 시간에 따른 제상패턴 해석을 위해 얼음과 유리의 고체도메인에 대한 추가적인 격자 생성 작업이 필요하였다. 유동해석 결과, 전면유리 근처의 유동구조, 유적선, 온도장 해석결과는 본 연구에서 수행한 제상덕트 모델이 우수한 성능으로 제상기능을 수행할 수 있음을 보였으며, 수치해석적 결과는 실험적 결과와 비교하여 제상패턴이 잘 일치함을 확인하였다. 또한 전면유리 상의 4 개의 지점에서 얻어진 온도, 물분율, 엔탈피의 시간에 따른 변화를 통해 상변화 과정을 정량적으로 파악하였다.