• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8437-8446
• /
• 2015

This study was designed to examine the effects of weight reduction programme(WRP) for obese primary school students on serum lipid level. This research used non-equivalent control group non-synchronized design that was conducted on two groups comprising 5th and 6th graders: an experimental group that received 12-week long WRP that combines diet, exercise and behavior modification therapy and the control group that did only rope-jumping. The collected data were analysed using ${\chi}^2$-test, t-test, ANOVA, Pairwise Comparsons by SPSS 18.0 Programme. It was proven that the WRP of this study was effective in lowering the total cholesterol(F=4.21, p=.049) and triglyceride(F=4.25, p=.049). WRP may be used as a basis for further studies that may be conducted after intervening the motivation level of the study subjects.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.369-372
• /
• 2002

In this research, a vision system for detecting tool breakage which is hardly detected by such indirect in-process measurement method as acoustic emission, cutting torque and motor current was developed and embedded into a PC-NC system. The vision system consists of CMOS image sensors, a slit beam laser generator and an image grabber board. Slit beam laser was emitted on the tool surface to separate the tool geometry well from the various obstacles surrounding the tool. An image of tool is captured through two steps of signal processing, that is, median filtering and thresholding and then the tool is estimated normal or broken by use of change of the centroid of the captured image. An air curtain made by the jetting high-pressure air in front of the lens was devised to prevent the vision system from being contaminated by scattered coolant, cutting chips in cutting process. To embed the vision system to a Siemens PC-NC controller 840D NC, an HMI(Human Machine Interface) program was developed under the Windows 95 operating system of MMC103. The developed HMI is placed in a sub window of the main window of 840D and this program can be activated or deactivated either by a soft key on the operating panel or M codes in the NC part program. As the tool breakage is detected, the HMI program emit a command for automatic tool change or send alarm to the NC kernel. Evaluation test in a high speed tapping center showed the developed system was successful in detection of the small-radius tool breakage.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.182-193
• /
• 2011

The aim of this paper is to present the methodology for hand tracking and hand gesture recognition. The detected hand and gesture can be used to implement the non-contact mouse. We had developed a MP3 player using this technology controlling the computer instead of mouse. In this algorithm, we first do a pre-processing to every frame which including lighting compensation and background filtration to reducing the adverse impact on correctness of hand tracking and hand gesture recognition. Secondly, YCbCr skin-color likelihood algorithm is used to detecting the hand area. Then, we used Continuously Adaptive Mean Shift (CAMSHIFT) algorithm to tracking hand. As the formula-based region of interest is square, the hand is closer to rectangular. We have improved the formula of the search window to get a much suitable search window for hand. And then, Support Vector Machines (SVM) algorithm is used for hand gesture recognition. For training the system, we collected 1500 hand gesture pictures of 5 hand gestures. Finally we have performed extensive experiment on a Windows XP system to evaluate the efficiency of the proposed scheme. The hand tracking correct rate is 96% and the hand gestures average correct rate is 95%.

• IE interfaces
• /
• v.11 no.3
• /
• pp.193-207
• /
• 1998

The agriculture and fishery share in the Korean GDP is continuously decreasing after 1960s. Furthermore the proportion of these industries in the GDP has diminished as low as 10 percent in recent years. However, the stockbreeding sector in these industries are considerably expanded. More than 50 percent of the whole farmhouses are involved in the livestock farming, and the stock farming portion is steadily increased in its size and scope. Thus, the mechanization and the automization of stockbreeding equipments are greatly required to reduce down production cost, as well as to win the competitiveness in the global market. From this aspect, developed in this paper is a stockbreeding management system (SMS) for dairy cattle, which can be used in small and medium sized dairy farms. First, the basic schema of the stockbreeding management system are addressed in view of stockbreeding management for individual dairy cattle. Electronic identification (EI) systems and sensory devices have changed stockbreeding management strategy from group stock control into individual stock control manner. The SMS receives stock body measurement data through the sensory devices such as weight, temperature, and milk conductivity meters. A common database then integrates those measuring data together so that the SMS can determine the appropriate solution on each stock's breeding such as feeding and milking. Thus, each stock can be supervised by a sophisticated SMS that provides the best solution to the stockbreeding throughout the stock's whole life-cycle. Secondly. six major submodules of the SMS, based on the EI and sensory devices, are proposed. They are individual stock management, disease management, health management, feeding management, milking management, and a propagation management submodule. Finally, a prototype system for the SMS is demonstrated. The system is developed using Delphi 2 client-server system run under the Windows 95 environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5986-5992
• /
• 2012

This study purpose is assessment to intention of turnover for dental hygienists. The study population was dental hygienists who registered at conference of Korean Dental Hygienists Association. Finally 1,955 among 2,040 were finished the question and response(response rate 95.8%). Statistical analysis conducted using SPSS 18.0K for Windows. The difference on the distribution of independent variables related with experience of turnover analyzed with Chi-square test. The results of this research could be summarized as follows: The rate of the dental hygienists experienced of turnover was 46.8%. The unmarried dental hygienists were more intended than the married ones(p<0.001). More higher education group, more higher working experience group, more higher income group, more aged group had more turnover(p<0.001). The reason of turnover were environment of employment(night work, 23.7%), personal reasons(19.1%), conditions of employment(14.6%). In conclusion, this study suggests that set up a strategy of career life for dental hygienists in dental clinic.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.90-95
• /
• 2008

An SHGC(Solar Heat Gain Coefficient) is a determinant of total flux of solar radiation coming indoor and a critical factor in evaluating heating and cooling load. U-value represents heat loss while SHGC denominates heat gain. Recently, windows with high solar gain, mid solar gain or low solar gain are being produced with the development of Low-E coating technology. This study evaluated changes in energy consumption for heating and cooling according to changes in SHGC when using double-layered Low-E glass and triple layered Low-E glass in relation to double layered clear glass as base glass. An Office was chosen for the evaluation. For deriving optical properties of each window, WINDOW 5 by LBNL, an U.S. based company. and the results were analyzed to evaluate performance of heat and cooling energy on anannual basis using ESP-r, an energy interpretation program. Compared to the energy consumption of the double layered clear glass, the double layered Low-E glass with high solar gain consumed $69.5kWh/m^2,yr$, 9% more than the double layered clear glass in cooling energy. The one with mid solar gain consumed $63.1kWh/m^2,yr$, 1% less than the base glass while the one with low solar gain consumed $57.6kWh/m^2,yr$, 10% less than the base glass. When it comes to tripled layered glass, the ones with high solar showed 2% of increase respectively while the one with mid solar gain and low solar gain resulted 5% and 11% in decrease in energy consumption due to low acquisition of solar radiation. With respect to cooling energy. it was found that the lower the SHGC. the less energy consumption becomes.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.105-111
• /
• 2012

Purpose: The purpose this study was to evaluate the marginal fitness of metal copings fabricated using rapid prototyping method and to compare the fitness with copings by conventional method. Then clinical availability of fixed dental prostheses (FDPs) fabricated using rapid prototyping method shall be confirmed based on marginal fitness. Methods: Ten same cases of3 unit FDPs epoxy models (abutment teeth 14 and 16) were manufactured. Each of ten epoxy models were scanned by 3shape D-700 scanner to be designed by experienced technician, and photopolymer 3 unit FDPs were fabricated using rapid prototyping methodand fabricated using Lost wax technique (LW) with same models. Marginal fitness of 3 unit FDPs were measured by silicone replica technique. T-test of independent sample for statistical analysis was executed with SPSS 12.0K for Windows. (${\alpha}$=.05) Results: Significantly higher mean (SD) marginal fitness (P<.000) were observed in the RP group $(95.9(18.0){\mu}m$ compared to the conventionally LW group $(80.1(13.8){\mu}m$. Conclusion: Marginal fitness of LW group showed excellent rather than RP group. However marginal fitness of 3 unit FDPs fabricated by RP method did not get out of clinical allowance value range significantly to allow clinical application.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.1 s.6
• /
• pp.75-82
• /
• 1996

As can be seen in US case with the introduction of ISTEA and CAAA, the expansion of the transportation decision-making role of local government is expected to be quite apparent in Korea, and the increased importance of decision-making in transportation issues requires increased attention to both justification and analysis of transportation initiatives. A GIS-based facility management system in a desktop computing environment has been constructed using MapInfo, ARC/INFO, and Microstation to allow such expanded role of local government's decision-making activities. In this paper, first, authors try to explain the procedures of system design; that is, the digital map production including vectorizing, data conversion, attribute data entry, and application programming development. Then, various management functions which are basically embedded in MapInfo environment, and application functions established by the use of MapBasic language has been explored Finally, the possible benefits of combining geographic information systems with traffic planning scheme has also been described with some discussion.

• The Journal of Korean Physical Therapy
• /
• v.25 no.2
• /
• pp.88-95
• /
• 2013

Purpose: The purpose of this study was to conduct an analysis of kinematics of lower extremities and trunk in stance phase of walking according to turning direction. Methods: Ten university students (five male, five female) who were in their 20s (mean age was 20.6 years old) participated in this study. Participants did not have participants did not have any problem with skeletal muscular system. We used the "Qualisys motion capture system" for analysis of trunk and lower extremity movement in stance phase of walking according to turning direction. We collected data while subjects walked a distance of 10 m, and at the 6 m line, subjects were required to turn to the left side and the right leg was positioned in stance phase and the left leg was positioned in swing. For data analysis, the SPSS for Windows ver. 20.0 statistics program was used in performance of one way analysis of variance according to turning direction. Results: Significant difference of trunk and lower extremities was observed for turning direction according to walking cycle (p<0.05). Upper trunk movement showed a greater increase at three dimensions than lower trunk, and in heel off phase, pelvic movement showed a greater increase than lower trunk (p<0.05). In 45 degree and 90 degrees of turning direction, all movements of trunk and lower extremities were significantly different among three events of stance phase (p<0.05). Conclusion: We suggest that three-dimensional movement analysis of trunk and lower extremities during turning movement was very important in order to indicate increasing balance or walking ability for people with impaired movement or walking.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5143-5148
• /
• 2012

Objective: The aim was to investigate indicators related to DNA damage and cancer pathogenesis in Type II diabetes cases with breast cancer. It was planned to evaluate the relationship between these markers with oral antidiabetic drugs. Research Design and Methods: Fourty patients and 10 healthy individuals were included in the study. HIF-$1{\alpha}$ and 8-OHdG are examined in blood samples taken from these individuals with an ELISA Kit. Statistical analysis of data was performed with 95% confidence using Windows package program SPSS 15.0. Results: HIF-$1{\alpha}$ parameters were found to be meaningfully higher in the patient group than the controls in both pretreatment and posttreatment periods (p<0.05). No significant differences in terms of 8-OHdG between patients and controls. However, posttreatment serum HIF-$1{\alpha}$ ve 8-OHdG levels was found lower than pretreatment levels in patients receiving metformin, but not with pioglitazone. Conversely, serum 8-OHdG levels decreased significantly in these patients. When patients were evaluated according to the treatment groups (pioglitazone vs. metfformin) no significant differences in terms of serum HIF-$1{\alpha}$ and 8-OHdG levels between treatment groups. Conclusions: HIF-$1{\alpha}$ levels decreased significantly in the patient group receiving metformin. However, there was no significant difference in terms of HIF-$1{\alpha}$ levels in the patients receiving pioglitazone.