• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.277-290
• /
• 1993

Dental caries is considered to be caused by demineralization by organic acid produced by microorganism. But the formation of subsurface lesion in initial caries make it diffcult to explain by simple demineralization. This study is carried out on the basis of thermodynamic concept proposed by Margolis and Moreno. The purpose of this study is to evaluate the effects of acid concentration and pH of lactate buffer system on the artificial caries lesion progress. 160 teeth without any crack, defect or opaque enamel were used and coated with nail varnish except the window ($2{\times}3$ mm). Under the constant degree of saturation(D.S.). The teeth were divided into 8 groups according to acid concentration(10mM, 25mM, 50mM, 100mM) and pH(4.3, 5.0, 6.0). Each group was immersed in buffer solution for 3, 6, 9, 18 days under controlled temperature($25^{\circ}C$). After cutting through the window and grinding, the specimens, 100-150 um in thickness, were imbibed in water or air and examined using polarilizing microscope. The depth of the surface and subsurface surface lesion were measured. 1. In the constant pH and D. S. value, the subsurface lesion progresses more rapidly as the concentration of lactic acid increases. (0.01, 0.025, 0.05, 0.1) 2. In the constant acid concentration and DS value, the subsurface lesion progresses more slowly as the pH increases. (4.3, 5.0, 5.5, 6.0) 3. The width of surface lesion seems to be constant independant of pH and acid concentration.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.518-528
• /
• 2009

IEEE 802.11 wireless local area network (WLAN) has become the prevailing solution for wireless Internet access while transport control protocol (TCP) is the dominant transport-layer protocol in the Internet. It is known that, in an infrastructure-based WLAN with multiple stations carrying long-lived TCP flows, the number of TCP stations that are actively contending to access the wireless channel remains very small. Hence, the aggregate TCP throughput is basically independent of the total number of TCP stations. This phenomenon is due to the closed-loop nature of TCP flow control and the bottleneck downlink (i.e., access point-to-station) transmissions in infrastructure-based WLANs. In this paper, we develop a comprehensive analytical model to study TCP dynamics in infrastructure-based 802.11 WLANs. We calculate the average number of active TCP stations and the aggregate TCP throughput using our model for given total number of TCP stations and the maximum TCP receive window size. We find out that the default minimum contention window sizes specified in the standards (i.e., 31 and 15 for 802.11b and 802.11a, respectively) are not optimal in terms of TCP throughput maximization. Via ns-2 simulation, we verify the correctness of our analytical model and study the effects of some of the simplifying assumptions employed in the model. Simulation results show that our model is reasonably accurate, particularly when the wireline delay is small and/or the packet loss rate is low.

• Journal of the Korean Ceramic Society
• /
• v.46 no.2
• /
• pp.175-180
• /
• 2009

Multilayer ceramic capacitors (MLCCs) have continually been made smaller in size and larger in capacity in resent years. However, the end termination electrode is still thick in many MLCCs. In this study, we used small grain glass frit to embody thin film and highly densification in the end termination by improve sintering driving force with well-dispersion and rising surface energy. Pastes were fabricated using size changed glass frit, such as 0.1 ${\mu}m$, 0.5 ${\mu}m$, 1.0 ${\mu}m$, 4.0 ${\mu}m$. Fabricated pastes were applied 05A475KQ5 chip and fired various sintering temperatures to analyze sintering behavior of pastes. Consequently, small glass frit used pastes have many merits than larger, such as well-dispersion, improve cornercoverage and surface roughness, possibility of low temperature sintering. However, we confirmed that small glass frit used pastes have narrow sintering window by rapid completion of sintering densification.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.359-367
• /
• 2017

This study aims to identify the factors that have effects on career preparation behaviors in college students studying Emergency Medical Technology and provide basic data for career guidance, career counselling and development of employment guidance programs. The subjects of the study were 450 who were randomly selected and conveniently sampled from the Departments of Emergency Medical Technology located in J Province, G Province, B and G Metropolitan Cities. The survey lasted from August 7th, 2017 to 9th of the same month after agreement on the survey was obtained from the targets and they were interviewed with the use of an organized questionnaire. 420 copies of the data collected were analysed with the use of SPSS ver. 14.0 for Window. As a result, it was discovered that career identity had a statistically significant positive effect on career preparation behaviors. Therefore, to facilitate preparation behaviors, they should be taught to have career identity, be motivated and supported to do more active career preparation behaviors.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.13-23
• /
• 2017

The purpose of this study is to analyze the expression method according to the planning of townhouse and the healing method that affects residents for communicating with natural environment, in order to propose resident-focused communication with nature for healing. The results are as follows. First, the expression of nature elements can be divided into 'direct' and 'indirect' and healing effects through nature can be divided into 'body' and 'psychology'. The healing method of residents through nature was classified into physical and psychological healing through openness, familiarity, comfort, and stability. Second, as an expression method according to townhouse planning, the arrangement plan induced active communication with nature through the arrangement according to topography and a common garden. In terms of construction plan, a bigger window or door than that of other residential spaces was installed on a wall, ceiling or opening to directly bring the nature of outside visually for more communication. Third, with regard to healing methods of townhouse, 'openness' which reduces depression and increases self-esteem, expands the view of residents. 'Familiarity', the healing method that can relieve the fatigue of eyes and bring psychological warmth and comfort, makes us feel familiar through the pattern and texture of woods and stones that are natural materials. 'Comfort' which heals residents by creating an outside space and bringing the nature elements through a huge window can provide psychological healing such as eased tension in daily life as well as physical healing such as vitamin D synthesis and the recovery of physiological function. Also, 'Stability' gives a comfortable feeling by applying the colors of finishing materials inside or seeing the colors of surrounding nature as it is through big windows. Finally, in order to support the results of this study more objectively, a follow-up study conducting a survey on the residents of townhouse is needed.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1972-1978
• /
• 2012

The polymer of (2,2-dimethyl-1,3-propanediaminebis(salicylideneaminato))-nickel(II), Ni(saldMp), was deposited on multi-walled carbon nanotubes (MWCNTs) substrate by the route of potential linear sweep. The nano structures of poly[Ni(saldMp)] have been obtained by adjusting the monomer concentration of 0.1, 0.2, 0.5, 1.0 and 1.5 mmol $L^{-1}$. The poly[Ni(saldMp)] prepared in acetonitrile solution with monomer concentration of 1.0 mmol $L^{-1}$ shows the fastest growth rate. The effects of potential window on charge-discharge efficiency and electrodeposition scan number on capacitance performance were discussed. Poly[Ni(saldMp)] prepared with less electrodeposition scans exhibits higher capacitance, but this goes against the improvement of the whole electrode capacitance. Sample with 8 deposition scans is the best compromise with the geometric specific capacitance 3.53 times as high as that of pure MWCNTs, and 1.24 times for the gravimetric specific capacitance under the test potential window 0.0-1.0 V.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.387-392
• /
• 2006

The recent on indoor air problem has led to many studies on the methods and effects of ventilation for better indoor air quality. Although natural ventilation is the most effective and energy-saving method in residental housings, the small size of openable window has been a problem in high-rise residential buildings to ventilate only through natural ventilation. Consequently, the installation of mechanical ventilation system has been a requirement in residential buildings, and has caused other problems such as increase of energy consumption and SBS. Hybrid ventilation which uses forces of both natural and mechanical power has been introduced to solve the problem of increase in energy consumption with natural ventilation. In this paper, two types of hybrid ventilation systems in residential building were introduced. One type was with natural ventilation through vent grille in the window, and another type was with natural ventilation through ceiling duct while both types used mechanical ventilation system with the outlets. The indoor temperature distribution and pollution density distribution in summer while operating the ceiling air conditioner were analyzed through CFD simulation. In this paper, the optimal location of diffusers to achieve thermal comfort would be proposed.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.435-444
• /
• 2021

The purpose of this study is a descriptive research to understand the effects of isolation, depression, and resilience of nursing students on career identity. Data were collected on an online basis using a structured questionnaire from 136 nursing students at a university. The collected data were analyzed by t-test, ANOVA, Kruskal-Wallis test, Pearson's correlation coefficients and multiple linear regression analysis using SPSS Window 25.0 program. The influence factors on the career identity was confirmed by the resilience (β=0.32, p=.001) total explanatory power of the variables was found to be 20.5%. Therefore, based on the results of this study, it is necessary to strategy establish a positive career identity and develop an effective career identity promotion program by exerting individual resilience against to negative emotions such as isolation and depression.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.2
• /
• pp.120-134
• /
• 1999

Image processing steps consist of image acquisition, pre-processing, region segmentation and recognition, and the images are easily corrupted by noise during the data transmission, data capture, and data processing. Impulse noise and gaussian noise are major noises, which can occur during the process. Many filters such as mean filter, median filter, weighted median filter, Cheikh filter, and Kyu-cheol Lee filter were proposed as spatial noise reduction filters so far. Many researches have been focused on the reduction of impulse noise, but comparatively the research in the reduction of gaussian noise has been neglected. For the reduction of gaussian noise, subset averaged median filter, using median information and subset average information of pixels in a window. was proposed. At this time, consider of the window size as 3$^{*}$3 pixel. The window is divided to 4 subsets consisted of 4 pixels. First of all, we calculate the average value of each subset, and then find the median value by sorting the average values and center pixel's value. In this paper, a better reduction of gaussian noise was proved. The proposed algorithms were implemented by ANSI C language on a Sun Ultra 2 for testing purposes and the effects and results of the filter in the various levels of noise and images were proposed by comparing the values of PSNR, MSE, and RMSE with the value of the other existing filtering methods.thods.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.296-301
• /
• 2009

An inductively coupled plasma assisted atomic layer deposition(ICP-ALD) system has been constructed for the deposition of ZnO thin films, and various experiments of ZnO thin films on p-type Si(100) substrates have been carried out to find the self-limiting reaction conditions for the ICP-ALD system under non-plasma circumstances. Diethyl zinc[$Zn(C_2H_5)_2$, DEZn] was used as the zinc precursor, $H_2O$ as the oxidant, and Ar as the carrier and purge gas. At the substrate temperature of $150^{\circ}C$, atomic layer deposition conditions based on self-limiting surface reaction were successfully obtained by series of experiments through the variation of exposure times for DEZn, $H_2O$, and Ar. ZnO deposition was repeated at different substrate temperatures of $90{\sim}210^{\circ}C$. As a result, the thermal process window(ALD window) for ZnO thin films was observed to be $110{\sim}190^{\circ}C$ and the average growth rate was measured to be constant of 0.29 nm/cycle. Properties of the film's microstructure and composition(Zn, O, etc.) were also studied. As the substrate temperature increases, the crystallinity was improved and ZnO(002) peak became dominant. The films deposited at all temperatures were high purity, and the films deposited at high temperatures had the composition ratio between Zn and O closer to one of a stable hexagonal wurtzite structure.