• 한국해양공학회지
• /
• 제25권2호
• /
• pp.73-78
• /
• 2011

The purpose of this study was to investigate the natural frequency of filament-wound composite towers for large scale wind-turbines using the finite element method (FEM). To define the material properties, we used both the effective property method and the stacking properties method. The effective properties method assumes that a composite consists of one ply. The stacking properties method assumes that a composite consists of several stacked plies. First, a modal analysis of the tower, filament-wound with angles of $[{\pm}30]$, was carried out using the two methods for composite material properties, the stacking method and effective method. Then, an FE analysis was performed for composite towers using filament winding angles of $[{\pm}30]$, $[{\pm}45]$, and $[{\pm}60]$. The FE analysis results using the stacking properties of the composite were in good agreement with the results from the effective properties method. The difference between the FEM and material properties methods was approximately 0~0.6%

• 복식문화연구
• /
• 제13권4호
• /
• pp.622-631
• /
• 2005

The purpose of this study is to know variety winding ways for scarf and to know the trends of scarf expression methods with seeing how to affect these ways on recent fashion. Investigating for scarf's concept and feature through theory records and looking for variety scarf expression ways were done for this study. And then The photo data of fashion magazines from s/s 2000 to s/s 2005, focusing on the divided scarf expressions, were analyzed. The frequencies of scarf expression are like this; decorating on the neck($60\%$), decoration on the shoulders($18\%$), decorating on the head($10\%$), etc($9\%$), using for accessaries($3\%$). Decorating on the necks is shown lasting ways. Also recently the methods breaking the established concepts - the mixing with two ways and the pratical using scarf' as a part of clothes - have a tendency to increase steady.

• 한국초지조사료학회지
• /
• 제18권1호
• /
• pp.55-60
• /
• 1998

This study was conducted to investigate the effects of the pasture types and the leveling methods of winding slope land for seedbed on the runoff, soil loss, botanical composition, dry matter yield of forage and economical value at the Experimental Field of Grassland and Forage Crops Division, National Livestock Research Institute, Suweon, from 1994 to 1995. The results obtained are summarized as follows: 1. Runoff of the improved land was higher than that of the unimproved land in the top grass and bottom grass. 2. Soil loss of the improved land was higher than that of the unimproved land in the top and bottom grasses in the first year. However, it was slightly higher in the unimproved land, and all of it were greatly decreased in the second year. 3. The percentage of grasses coverage was increased with the improved land in the first year, and it was not different between the improved land and unimproved land in the second year. Also, it was slightly increased in the bottom grasses. 4. Dry matter yield of grasses was increased with improved land at the top and bottom grasses. DM yield of grasses was increased in the top grasses in the first year and bottom grasses in the second year, respectively. 5. The establishment cost of grasses was decreased with wages decrement, and the management cost was saved about 1,116,000 won per ha with improved land. The results demonstrated that although soil loss was increased by leveling methods of improved land irrespective of pasture types in the first year, it was decreased with time little by little. Also, improved land was very good for grasses coverage, dry matter(DM) yield and economical value.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.143-148
• /
• 2014

Conventional wireless power transfer methods based on coupled magnetic fields need a complex winding structure on the surface of the energy transfer and shows poor efficiency near metal objects due to the eddy current effect. In this study, to mitigate these problems, we investigate an electric field-coupled power transmission system, which is less prone to metal object problems and EMI. Because of the fundamental physical limit in the size of link capacitances, a half-bridge converter with an impedance matching transformer is proposed and the design procedure is derived to provide a soft-switching scheme. Hardware implementation shows that the proposed scheme with a pair of 10cm by 10cm copper plate can power a 1.4W USB FAN in a separation of 0.2mm by using insulating paper when driven by 227 kHz gate pulse.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.79-84
• /
• 2011

The purpose of this study was to investigate the buckling load of filament-wound composite towers for large scale wind-turbines using the finite element method (FEM). To define the material properties, we used both the effective property method and stacking properties method. The effective properties method assumes that a composite consists of one ply. The stacking properties method assumes that a composite consists of several stacked plies. First, a linear buckling analysis of the tower, filament-wound with angles of $[{\pm}60]$, was carried out using the two methods for composite material properties: the stacking method and effective method. An FE analysis was also performed for the composite towers using the filament winding angles of $[{\pm}30]$, $[{\pm}45]$, and $[{\pm}60]$. The FE analysis results using the stacking properties of the composite were in good agreement with the results from the effective properties method. The difference between the FEM results and material properties method was approximately 0~2.3%. Above the angle of $[{\pm}60]$, there was little change in the buckling load.

• 한국정보통신학회논문지
• /
• 제3권4호
• /
• pp.887-893
• /
• 1999

선박 내 공기정화나 음료수 살균용으로 제작된 세라믹 방전판 상하면에 패턴된 전극간에 일어나는 연면 코로나 방전을 이용한 오존발생기 구동장치의 주파수제어 특성에 대하여 분석하였다. 고압변압기의 2차측 권선 자체의 인덕턴스와 세라믹 방전판 전극 자체의 용량간의 공진도를 주파수제어를 통하여 제어하여 최고 5배의 전류제어범위를 실현하였다. 기존의 전압제어 및 단속제어방식에 비하여 주파수제어 방식은 28 mg/W의 오존발생 효율과 40% 의 입력전압 변동에 대하여 3.4 % 이내의 방전전류 안정도를 갖는 것으로 측정되었다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2276-2283
• /
• 2018

A 50kW-4000rpm interior permanent magnet synchronous machine (IPMSM) applied to the high-performance electric vehicle (EV) is introduced in this paper. The main work of this paper is that a 2-D T-type lumped-parameter thermal network (LPTN) model is presented for IPMSM temperature rise calculation. Thermal conductance matrix equation is generated based on calculated thermal resistance and loss. Thus the temperature of each node is obtained by solving thermal conductance matrix. Then a 3-D liquid-solid coupling model is built to compare with the 2-D T-type LPTN model. Finally, an experimental platform is established to verify the above-mentioned methods, which obtains the measured efficiency map and current wave at rated load case and overload case. Thermocouple PTC100 is used to measure the temperature of the stator winding and iron core, and the FLUKE infrared-thermal-imager is applied to measure the surface temperature of IPMSM and controller. Test results show that the 2-D T-type LPTN model have a high accuracy to predict each part temperature.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.103-109
• /
• 2006

This research is contents about output characteristic of optic current sensor that use faraday effect. optic current sensor used in an experiment is consisted of three parts.(1) Source of light used laser diode of 1310[nm].(2) Sensor section manufactured circularly according to gas insulated switchgear. And $9/125[{\mu}m]$ standard single mode optical fiber for communication was installed winding 20 [turn] on sensor section core surroundings of diameter 31 [cm].(3) Electrical signal of PD(Photo detector) is collected using NI company's 16bit DAQ board via terminal block. Collected data analyzed by different three signal processing methods. NI company's $Labview^{TM}$ was used to signal processing software. As a result, In signal processing of optic current sensor, we could know that noise greatly more influences the error generation than fluctuation of light intensity. also, 1 class CT(current transformer) manufacture that have error rate less than 1[%] was available by removing these

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.86-89
• /
• 2006

고온 특성이 매우 우수한 탄소섬유와 상대적으로 내열성능이 취약한 Epoxy수지로 구성된 CFRP재의 고온 환경 하에서의 인장강도 특성에 관한 실험적 및 해석적 연구가 수행되었다. 특히, CFRP재의 인장 강도특성에 결정적으로 작용하는 섬유와 Epoxy 수지와의 계면의 특성에 초점을 맞추었으며, 고온 환경하에서 점차적으로 저하되는 계면 강도의 변화가 CFRP재의 인장강도에 미치는 영향을 정량적으로 평가하였다. 이를 위해, Strand 인장 및 Short Beam 시험을 고온 환경 하에서 실시하였으며, Curtin-Takeda Model를 도입하여 이론해석을 실시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2063-2066
• /
• 2005

This paper presents an approach to detect the dielectric condition of FRP Hot Stick in EHV high voltage cable whereas shutting down the power system is not necessary. The radio frequency generating method is adopted by transmitting radio wave into the Electrodes. This instrument is small, easy to use and also inexpensive. Furthermore, the impurity level of dirt on high voltage insulator (non-ceramic type) will be analyzed by using the methods based on IEEE Std.978-1984 at 105 kV.DC. /305 mm. and OSHA Regulation 1910.269 Part J - live line tools. The frequency at 10-20 MHz is applied to FRP Hot Stick via Electrode1 and from FRP Hot Stick surface to Electrode 2. After that the results will be evaluated by testing in each condition of FRP Hot Stick, such as dry surface, hot surface, foil winding and conductor inserting. Finally, the watt loss will be examined and compared with the loss from humidity and Carbon tracking. The important components of this system are radio frequency generating unit, frequency stabilizing unit, frequency amplifier, FRP Hot Stick frequency counter, processing unit, and display unit.