• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.506-512
• /
• 1997

Ultrasonic knives have been successfully used for the surgery of many medical fields. However, the conventional ultrasonic knives for surgical operation cannot be controlled its resonant frequency. So if the material to cut has different characteristic impedance then different ultrasonic knife will be needed. Because the optimum driving frequency of ultrasonic knife is different by characteristic impedance of material. In this work, using a frequency variable ultrasonic transducer made of multi-layered PZT vibrator, a frequency controllable ultrasonic knife will be suggested. The design and computation principles will be also derived. For this work, firstly, the characteristics of this ultrasonic knife will be analyzed by transmission line model equivalent circuit, and the free admittance characteristics and vibrational velocity distributions will be obtained. Secondly, we will design and make the frequency controllable electrical oscillator for driving this ultrasonic knife.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.13-13
• /
• 2011

Graphene based nano-electronic and nano-electromechanical devices will be introduced in this presentation. The first part of the presentation will be covered by our recent results on the fabrication and physical properties of artificially twisted bilayer graphene. Thanks to the recently developed contact transfer printing method, a single layer graphene sheet is stacked on various substrates/nano-structures in a controlled manner for fabricating e.g. a suspended graphene device, and single-bilayer hybrid junction. The Raman and electrical transport results of the artificially twisted bilayer indicates the decoupling of the two graphene sheets. The graphene based electromechanical devices will be presented in the second part of the presentation. Carbon nanotube based nanorelay and A new concept of non-volatile memory based on the carbon nanotube field effect transistor together with microelectromechanical switch will be briefly introduced at first. Recent progress on the graphene based nano structures of our group will be presented. The array of graphene resonators was fabricated and their mechanical resonance properties are discussed. A novel device structures using carbon nanotube field effect transistor combined with suspended graphene gate will be introduced in the end of this presentation.

• 한국인쇄학회지
• /
• 제19권1호
• /
• pp.42-54
• /
• 2001

The combination of a silicone surfaced plate and high viscosity ink produced a waterless printing system that worked well, but had limitation. The limitation was that this system was restricted to relatively short run lengths. In the waterless printing process, the press tended to heat up rapidly. Heat in turn, broke down the resins in the inks, causing them to become more fluid. When the ink is heated, the viscosity will drop, the ink will become too liquid and the plate will no longer be able to resist it. The ink will adhere to the non-print portions of the plate, and will print as a very fine mist or speckle pattern in the non-image area. On the other hand, when the ink gets too cold, viscosity will increase until ink transfer is impeded. This study carried otu to investigate the effect of temperature variations of the inks on the print quality in waterless lithography and to examine the adaptability of waterless lithography to conventional offset press without cooling system.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.193-198
• /
• 2005

The solar energy floodgate which discusses will minimize a quotient bringing up for discussion friction resistance and it will do to write a disturbance power, with the base which will reach it will be able to use the solar power unit in order. It is a plan which to magnification supply the practicality and will give proof will the effort with the irrigation facility of the farming village. Magnification supply of the solar energy floodgate which it sees hazard the stack supervisor and the possibility the use against the farmer and the easy frost does the monitoring against and the work which it complements is necessary.

• 디지털융복합연구
• /
• 제3권2호
• /
• pp.39-57
• /
• 2005

This research is about continuous improvement in productivity for the central and local government administration. It is a comprehensive execution manual that summarizes from preparation to completion of this task. If you follow the process described in this research, you will achieve the following. l. You will motivate the innovators. 2. You will spare yourself of many trial and errors and risks thus increasing the effectiveness, 3. You will eliminate the obstacles to innovation. 4. You will continue to innovate and will be able to assess the results through visible index.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2005년도 추계학술대회
• /
• pp.63-81
• /
• 2005

This research is about continuous improvement in productivity for the central and local government administration. It is a comprehensive execution manual that summarizes from preparation to completion of this task. If you follow the process described in this research, you will achieve the following. 1. You will motivate the innovators. 2. You will spare yourself of many trial and errors and risks thus increasing the effectiveness. 3. You will eliminate the obstacles to innovation. 4. You will continue to innovate and will be able to assess the results through visible index.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1991년도 춘계 총회 및 학술발표회
• /
• pp.9-9
• /
• 1991

This paper will begin by describing osmosis and how reverse osmosis works. It will show how osmotic pressure affects reverse osmosis operations. It uill explain salt rejection, membrane flux, and recovery rates and the affect that salt built up has on membrane performance. It wil 1 explain the limitations of RO performance and why pretreatment is important. It will describe the two basic types of membrane, asymmetric and thin-film composite and explain the difference between these types plus compare cellulose acetate types to aromatic polyamide type membranes. It will discuss operating efficiences as it compares to feedwater pressure, concentration, temperature and pH. Finally, it will discuss the differences between tubular, plate and frame, hollow fiber and spiral wound element design. It will be a paper that talks about the basics of RO systems and should give a person who is unfamiliar with RO a basic introduction to this type of separation technology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1199-1201
• /
• 2004

When The temperature of the joining of SCR rises major changes of characteristics are increase of leakage current, decrease of break-down voltage, and increase of turn off time. Because these changes promote the inferiority of SCR it(SCR) will get out of control and its life time will be shortened and finally it will be destroyed. In this paper, we will measure the changes of the characteristics in accordance with a rise in temperature. On the basis of the result we will find out the appropriate time to change SCR and we will use the result for the maintenance of SCR and increase of reliability of SCR.

• Genomics & Informatics
• /
• 제11권4호
• /
• pp.218-223
• /
• 2013

The rapid advances in genetic knowledge and technology raise various, sometimes unprecedented, ethical dilemmas in the scientific community as well as the public realm. To deal with these dilemmas, the international community has prepared and issued ethical standards in various formats. In this review, seven international standards regarding genetics and genomics will be briefly introduced in chronological order. Critical reflections on them will not be provided in this review, and naturally, they have their own problems and shortcomings. However, a common set of the principles expressed in them will be highlighted here, because they are still relevant, and many of them will be more relevant in the future. Some of the interesting contents will be selected and described. After that, the morality of one recent event related to whole-genome sequencing and person-identifiable genetic data will be explored based on those international standards.

• Journal of Preventive Medicine and Public Health
• /
• 제35권2호
• /
• pp.83-91
• /
• 2002

Bioinformatics is a rapidly emerging field of biomedical research. A flood of large-scale genomic and postgenomic data means that many of the challenges in biomedical research are now challenges in computational sciences. Clinical informatics has long developed methodologies to improve biomedical research and clinical care by integrating experimental and clinical information systems. The informatics revolutions both in bioinformatics and clinical informatics will eventually change the current practice of medicine, including diagnostics, therapeutics, and prognostics. Postgenome informatics, powered by high throughput technologies and genomic-scale databases, is likely to transform our biomedical understanding forever much the same way that biochemistry did a generation ago. The paper describes how these technologies will impact biomedical research and clinical care, emphasizing recent advances in biochip-based functional genomics and proteomics. Basic data preprocessing with normalization, primary pattern analysis, and machine learning algorithms will be presented. Use of integrated biochip informatics technologies, text mining of factual and literature databases, and integrated management of biomolecular databases will be discussed. Each step will be given with real examples in the context of clinical relevance. Issues of linking molecular genotype and clinical phenotype information will be discussed.