• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.378-383
• /
• 2013

A butterfly throttle valve has been used to control the brake power of an SI engine by controlling the mass flow-rate of intake air in the induction system. However, the valve has a serious effect on the volumetric efficiency of the engine due to the pressure resistance in the induction system. In this study, a new intake air controlling valve named "Variable Geometry Throttle Valve(VGTV)" is proposed to minimize the pressure resistance in the intake system of an SI engine. The design concept of VGTV is on the application of a venturi nozzle in the air flow path. Instead of change of the butterfly valve angle in the airflow field, the throat width of the VGTV valve is varied with the operating condition of an SI engine. In this numerical study, CFD(computational fluid dynamics) simulation technique was incorporated to have an aerodynamics performance analysis of the two air flow controlling systems; butterfly valve and VGTV and compared the results to know which system has lower pressure resistance in the air intake system. From the result, it was found that VGTV has lower pressure resistance than the butterfly valve. Especially VGTV is effective on the low and medium load operating condition of an SI engine. The averaged pressure resistance of VGTV is about 49.0% lower than the value of the conventional butterfly throttle valve.

• Korean Journal of Organic Agriculture
• /
• v.26 no.2
• /
• pp.233-243
• /
• 2018

This study was conducted to elucidate the effects of green manure crop on growth characteristics and saponin contents of Platycodin grandiflorum Ridix roots for organic farming. Rye, hairy vetch and rye+hairy vetch were cultivated as green manure crops with several different methods before transplanting P. grandiflorum Radix. In root width and number of fine-roots, when the highest scores (23.9 mm, 25.7) was recorded in rye pre-cultibated plot in $2^{nd}$ year cultivation. Fresh weight of the Platycodin grandiflorum Ridix root was no significant difference among the different green manure crop treatments, but fresh weights of the Platycodin grandiflorum Ridix root of all green manure crop treatments were higher than that of control. The total content of saponin was highest detected in Platycodin grandiflorum Ridix roots of the hairy vetch plot (1,106 mg/100 g) and rye plot (1,693 mg/100 g) in $1^{st}$ and $2^{nd}$ year cultivation, respectively. Therefore, we confirmed that precultivation of the green manure crops showed significant differences in the growth characteristics and saponin contents of the Platycodin grandiflorum Ridix root, and growth and saponin contents in the Platycodin grandiflorum Ridix root of rye precultivated plot was much higher in $2^{nd}$ year cultivation than $1^{st}$ year cultivation.

• Geomechanics and Engineering
• /
• v.8 no.6
• /
• pp.757-767
• /
• 2015

Rock mass is an important engineering material. In hydropower engineering, rock mass of bank slope controlled the stability of an arch dam. However, mechanical characteristics of the rock mass are not only affected by lithology, but also joints. On the basis of field geological survey, this paper built rock mass material containing parallel concentrated joints with different dip angle, different number under different stress conditions by PFC (Particle Flow Code) numerical simulation. Next, we analyzed mechanical property and fracture features of this rock mass. The following achievements have been obtained through this research. (1) When dip angle of joints is $15^{\circ}$ and $30^{\circ}$, with the increase of joints number, peak strength of rock mass has not changed much. But when dip angle increase to $45^{\circ}$, especially increase to $60^{\circ}$ and $75^{\circ}$, peak strength of rock mass decreased obviously with the increase of joints number. (2) With the increase of confining stress, peak strengths of all rock mass have different degree of improvement, especially the rock mass with dip angle of $75^{\circ}$. (3) Under the condition of no confining stress, dip angle of joints is low and joint number is small, existence of joints has little influence on fracture mode of rock mass, but when joints number increase to 5, tensile deformation firstly happened at joints zone and further resulted in tension fracture of the whole rock mass. When dip angle of joints increases to $45^{\circ}$, fracture presented as shear along joints, and with increase of joints number, strength of rock mass is weakened caused by shear-tension fracture zone along joints. When dip angle of joints increases to $60^{\circ}$ and $75^{\circ}$, deformation and fracture model presented as tension fracture zone along concentrated joints. (4) Influence of increase of confining stress on fracture modes is to weaken joints' control function and to reduce the width of fracture zone. Furthermore, increase of confining stress translated deformation mode from tension to shear.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.215-226
• /
• 2015

In this study, with variables the cross section area ($97m^2$, $58m^2$, $38m^2$) and the wind velocity(0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 m/s), the time of getting off train dependent on the way of itself and the width of the evacuation route was analyzed, and also fire and evacuation characteristics is reviewed by cross section area of each wind velocity. As the result, if cross section become smaller, the density of harmful gases in the tunnel increased more than the ratio of decreasing cross section area. In the case of small cross sectional area, the surrounding environment from initial fire is indicated to exceed the limit criteria suggested in performance based design. In the analysis of effective evacuation time for evacuation characteristics, the effective evacuation time was the shortest in the case of evaluating effective evacuation time by the visibility. Also, there was significant difference between the effective evacuation time on the basis of performance based evaluation and the effective evacuation time obtained by analyzing FED (Fractional effective dose), one of the analysis method obtaining the point that deaths occur, against harmful gases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.481-492
• /
• 2018

The steel-plate concrete composite beam is composed of a steel plate, concrete and shear connector to combine two inhomogeneous materials. In general, the steel plate is assembled by welding an existing composite beam. In this study, the SPC beam was composed of folding steel plates and concrete, without a headed stud. The folding steel plate was assembled by a high strength bolt instead of welding. To improve the workability in a field construction, a hat-shaped cap was attached to the junction with a slab. Monotonic load testing under two points was conducted under displacement control mode to analyze the flexural strength of the SPC beam using a cap as the shear connector. Five specimens with shear connector types, protrusion length, and different thickness of steel plates were constructed and tested. The experimental results were analyzed through the relationship between the shear strength ratio and flexural strength in KBC 2009. The test results showed a shear strength ratio of more than 40 %. In the case of using a cap-like specimen as the shear connector, the flexural strength was 70% of the value calculated as a fully composite beam. In addition, the cap showed a smaller shear strength than the stud, but the cap served as a shear connection. When the thickness of the steel plate was taken as a variable, the steel plate exhibited a bending strength of approximately 70% compared to a fully formed steel plate, and exhibited similar deformation performance. Local buckling occurred due to incomplete composite behavior, but local buckling occurred at a 5% higher strength for a relatively thick steel plate. The buckling width also decreased by 15%.

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.275-282
• /
• 2009

The effect of two plant growth-promoting rhizobacteria (PGPR) on plant growth and systemic protection against soft rot disease and stem rot disease of canola (Brassica napus), caused by Erwinia carotovora and Sclerotinia sclerotiorum was investigated in a laboratory and a greenhouse. Selected PGPR strains C4 and D8 were treated to canola seeds by soaking. Strains C4 and D8 significantly not only increased plant height and root length about 74% and 40.3% and also reduced disease severity of soft rot disease by 80% by C4 and D8 respectively, compared to the control. Especially strain C4 showed antifungal activity against 6 fungal pathogens, S. sclerotiorum, Rhizoctonia solani, Botrytis cinerea, Fusarium oxysporum, Phytophthora capsici and Colletotrichum acutatum. In greenhouse experiment, the seed treatment of both of them increased plant height, leaf width and leaf length of canola plant to 19.5% and 24.9%, 11.3% and 15.3%, and 14.1% and 20.7% by C4 and D8, respectively, and reduced disease severity of S. sclerotiorium. These results indicate that these two PGPR strains can decrease disease severity and increased plant growth under greenhouse condition. Therefore, these two bacteria have a potential in controlling Sclerotinia stem rot of canola. These strains have to investigate under field condition to determine their role of antibiosis, induced systemic resistance and plant growth promotion on canola.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.428-434
• /
• 1995

The purpose of this study is to develop a sanitary aquarium for the safety slices of raw fish by using U.V. light. Water re-circulating system was composed of two tanks. One of the tanks $(90\times45\times45cm\;in\;size),$ was used for rearing fish and the other $(90\times45\times45cm\;in\;size),$ with 37 pieces of corrugated plastic plates was used for the growth of Nitrosomonas and Nitrobacter to remove ammonia from the water. Consequently, bactericidal effects of U.V. light were examined under the controlled condition of water with flow rate 730m1/sec (water flow thickness: 10mm), the width 41cm of water flow route, and the distance 4.75cm from the lamp to its water bottom, and U.V. light 75W (5 lamps). The water of the aquarium tank will be theroetically circulated 1 cycle per 18 min. In these conditions the bactericidal effect was $85\%$ just after passing through U,V. light and 3 log cycle in aquarium tank water. The count of Vibrio parahaemolyticus just after irradiation was decreased by about over than 3 log cycle. Under the irradiation for 72 hours, viable cell counts in both skin and gill of fish reared were decreased into about 2 log cycle, but there was no significant decrease in viscera. When the temperature of the tank was controlled at about $20-23^{\circ}C$ under the same condition, viable cell counts were reduced about 2 log cycle, and fecal coliforms were reduced about 1 log rycle and 3 log cycle in Crassostrea gigas and Mytilus edulis, respectively.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.75-89
• /
• 2004

Long term performance of concrete pavement significantly depends on the given construction and environmental condition. It means that random cracks and extreme crack width due to inappropriate quality control at the early age might lead to decreasing the pavement service life. The temperature and moisture during the construction, cement and aggregate types, curing condition are major components to affect the quality of the concrete pavement at the early age. First of all, the high temperature differential, that is made by increasing air temperature and the heat of cement hydration, is known as the major contributor to severe cracks. In this study, tent covering was used for controlling temperature of the concrete slab. The field measurement data indicates that the effect of the tent covering is very significant to decrease possibilities of random crack occurrence and curling stress and enhance the long-term concrete strength. HIPERPAV(High PERformance PAVing software), a program predicting the strength and stress of an earty-age concrete pavement (72 hour after placement), is used for simulating the effects of tent covering. The HIPERPAVE results showed that the section with the tent covering has higher reliability than the section without the tent covering by 22.5%. In details, reliability is increased 72.5% (without the tent covering) to 95% (with the tent covering).

• Korean Journal of Veterinary Research
• /
• v.16 no.1
• /
• pp.11-25
• /
• 1976

Studies on pathogenicities and developmental stages of Nosema apis (Zander, 1909) were carried out through artificial infection to Nosema free honey bees with various levels of spores isolated from local honey bee colony. The results obtained were summarized as follows: 1. The clinical symptoms were observed as dysentery, enteritis of mid-gut (enlargement and decoloration), crawling posture and shortening of the longevity of worker bees in the rearing honey bee colony inoculated with the spores. 2. Number of spores harvested from laboratory rearing honey bees were progresively increased to 4 weeks after inoculation. The regression equations and coefficients of correlations to various spore levels were as follows in each treatment colony. Colony 1. ($$1,000{\times}10^4spores/ml$$) $$y_{c1}=471{\times}10^{4}x+454{\times}10^4(r=0.65^*$$) Colony 2. ($$500{\times}10^4spores/ml$$) $$y_{c2}=340{\times}10^{4}x+207.8{\times}10^4(r=0.99^{**}$$) Colony 3. ($$100{\times}10^4spores/ml$$) $$y_{c3}=150{\times}10^{4}x+84.2{\times}10^4(r=0.99^{**}$$) Colony 4. ($$10{\times}10^4spores/ml$$) $$y_{c4}=13.8{\times}10^{4}x+13{\times}10^4(r=0.98^{**}$$) 3. Average longevity of worker bees artificially infected with Nosema apis was shortened as 21.7~43.8% compare to the control. (p<.05, p<.01) 4. The spores which were isolated from honey bee colony infected with Nosema disease were ovoid or spherical form, and measured, as a rule, from $4.7{\mu}m$ to $6.1{\mu}m$ (mean $5.3{\mu}m$) in length and from $2.4{\mu}m$ to $3.2{\mu}m$ (mean $2.9{\mu}m$) in width. 5. In the mid-gut of honey bees, the spore was progresively germinated and became trophozoite stage. The trophozoites were grown to meronts and their binary fission were begun. The divided two sporoblasts were developed to the spores which had elastic membrane. The new spores were shed in excreta of honey bees 10~15 day after inoculation at $25{\pm}2$ centigrade. 6. The ultrastructure of spore membrane consisted of three layers, such as, outer, middle and inner layer. The sporoplasm consisting lamellar structure occupied only anterior part of the spore and was often extended to posterior direction where definite vacuoles and a polar filament was able to detect.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.498-505
• /
• 2010

To evaluate the effectiveness of AMF on the growth of horticultural crops, we compared mycorrhizal and non-mycorrhizal plants, lettuce (Lactuca sativa L.), that were inoculated with AMF propagules. As compared to the AMF- seedlings, in AMF+ seedlings at 3 weeks after sowing, the number of leaves increased 9%, leaf fresh weight increased 59%, leaf area increased 58%, and leaf length and width increased 21-22%, and chlorophyll content increased 2%. Furthermore, at 9 weeks after sowing, compared to the AMF- plants, in lettuce plants inoculated with AMF at the sowing and transplanting stages, the number of leaves increased 21% and 18%, leaf fresh weight increased 51% and 41%, root fresh weight increased 56% and 47%, and chlorophyll content increased 18% and 19%, respectively. Further this experiment indicated that the growth responses of lettuce plants inoculated with AMF during transplanting were similar to those inoculated with AMF during sowing. The results imply that the AMF infection timepoint is not important. The P content in the leaves of lettuce plants inoculated with AMF during transplanting was significantly higher (217%) than that of leaves from lettuce plants not inoculated with AMF. In contrast, the P content of the leaves of lettuce plants inoculated with AMF during the sowing stage was similar to that of leaves of control lettuce plants. In this experiment, P and chlorophyll content in AMF+ lettuce plants were higher than in AMF- plants, indicating that the photosynthetic rate was improved with AMF inoculation.