• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.232-247
• /
• 2005

Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)

• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.29-33
• /
• 2005

To develop proper soil management practices for reducing soil erosion, experiments were carried out by using lysimeters in Pyeongchang highland, Korea. Lysimeters installed at Hoenggye bad 13% slope, 15 m slope length and 3 m width. Lysimeters with 23% slope, 15 m slope length and 3 m width were also installed at Yongsan. Soil textures in Hoenggye and Yongsan lysimeter plots were silty clay loam and sandy loam, respectively. In the lysimeters potato was cultivated, and slant furrow culture and contour culture were applied. Up-down furrow and continuous fallow lysimeter was included in the experiments as a control plot. For the slant furrow and contour culture methods, minimum furrow mulching and gravel barrier were placed at each end of the furrows in the lysimeters from April to October in 2000 and 2001 to prevent soil and nutrient losses. In Heonggye, in two years experiments, average soil loss of 17 Mg/ha was found in the up-down and continuous fallow lysimeter and 2.6 Mg/ha from furrow minimum straw and slant furrow treatment, and 1.8 Mg/ha from slant furrow and gravel bag treatment. In the contour culture, the soil losses were further reduced. In Yongsan, soil loss in the slant furrow culture without any protection treatment was 167 Mg/ha, and the soil loss was reduce to 61 and 86 Mg/ha with minimum straw and gravel bag treatments, respectively. The soil loss could be reduced more than 45% by furrow minimum straw and gravel barrier. The furrow minimum straw or gravel bag barrier successfully reduced soil loss in clay loam soil in Heonggye, but still the treatments were not enough to reduce soil loss in saprolite piled sandy loam soil in Yongsan.

• Journal of the Korean Society of Radiology
• /
• v.10 no.6
• /
• pp.395-401
• /
• 2016

Upper gastrointestinal series is a diagnostic test that X-ray passes through the stomach after administering contrast media such as barium or gastrografin. Upper gastrointestinal series with an advantage of no side effect except temporary constipation or abdominal pain has been widely used to diagnose diseases of the gastrointestinal system. However, image degradation and diagnostic accuracy frequently occurred when improper movement and breath control were carried out by lack of understanding the overall inspection process for the upper gastrointestinal series. The movie of the upper gastrointestinal series was made for improving inspection accuracy and image quality. The examinees encouraged to see the movie for waiting time before doing upper gastrointestinal series. In this study, image quality and diagnostic accuracy was examined for the effect of the movie about upper gastrointestinal series. 60 patients composed of each 10 people from 30s to 80s were selected randomly among both 2,940 examinees in 2014 and 3,076 examinees in 2015. Image quality was evaluated by the full width at half maximum of profile for each image using the Image J. The measurement of the full width at half maximum showed 0.208 mm and 0.133 mm for after and before seeing the movie. Thus it was verified that the movie education could improve the image quality and diagnostic accuracy for upper gastrointestinal series.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.1
• /
• pp.9-14
• /
• 2006

This experiment was carried out to breed the cold-tolerant variety of Italian ryegrass (Lolium multiflorum Lam.) at the Grassland and Forage Crops Division, National Livestock Research Institute, RDA at Suwon, Korea, from 1999 to 2005. The new variety 'Kogreen' is a diploid variety with a green leaf color and had semi-erect habit in late autumn and erect growth habit in early spring. The heading date of 'Kogreen' was on May 4, and for 'Florida 80' was May 2, both are considered as early-heading variety. 'Kogreen' was wider by 0.7mm in flag leaf width, longer by 2 cm in flag leaf length and shorter by 1cm in plant length than the control variety, Florida 80. Stem width of 'Kogreen' was similar to that of 'Florida 80' and 'Hwasan 101'. cold tolerance of 'Kogreen' was better than that of 'Florida 80'. Dry matter(DM) yield (12,884kg/ha) of 'Kogreen' was 3% less than that of 'Florida 80'. in vitro dry matter digestibility was 74.7% and total digestible nutrient was 65.1%, which are 3.6% and 1.5% higher than those of 'Florida 80', respectively. Acid detergent fiber and neutral detergent fiber of 'Kogreen' were 30.1% and 54.1% which are 1.9% and 1.3% lower than those of 'Florida 80', respectively.

• Journal of Korea Water Resources Association
• /
• v.51 no.2
• /
• pp.99-107
• /
• 2018

This study was to evaluate the stream depletion due to groundwater pumping from 17 wells near the Anseongcheon upper stream using the Baalousha's analytical solution (2012) which directly considers stream width and streambed hydraulic conductivity. The input hydraulic values of aquifer and streambed were obtained from the pumping tests and seepage experiments. The estimated streamflow depletion rates divided by pumping rate (dimensionless stream depletion) showed a range from 0.23 to 0.89 for 5 year pumping. In particular, the results revealed that the groundwater pumping has insignificant effects on streamflow when the stream depletion factor (SDF) is higher than 1,000 with values of dimensionless stream depletion lower than 0.4. A more simple Hunt's solution (1999) also applied to the same wells, and the results showed that the difference between the dimensionless stream depletions calculated by using both solutions could be negligible. From the comparison of the Baalousha's solution (2012) with the Hunt's solution (1999) with total 3,000 cases of simulations with combinations of various aquifer and stream properties, the stream-well distance should be more longer than stream width for reducing the discrepancy between both solutions.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.476-481
• /
• 2012

Among the various roll-to-roll printing technologies such as gravure, gravure-offset, and reverse offset printing, reverse offset printing has the advantage of fine patterning, with less than 5 ${\mu}m$ line width. However, it involves complex processes, consisting of 1) the coating process, 2) the off process, 3) the patterning process, and 4) the set process of the ink. Each process demands various ink properties, including viscosity, surface tension, stickiness, and adhesion with substrate or clich$\acute{e}$; these properties are critical factors for the printing quality of fine patterning. In this study, Ag nano ink was developed for reverse offset printing and the effect of polyvinylpyrrolidone(PVP), used as a capping agent of Ag nano particles, on the printing quality was investigated. Ag nano particles with a diameter of ~60 nm were synthesized using the conventional polyol synthesis process. Ethanol and ethylene glycol monopropyl ether(EGPE) were used together as the main solvent in order to control the drying and absorption of the solvents during the printing process. The rheological behavior, especially ink adhesion and stickiness, was controlled with washing processes that have an effect on the offset process and that played a critical role in the fine patterning. The electrical and thermal behaviors were analyzed according to the content of PVP in the Ag ink. Finally, an Ag mesh pattern with a line width of 10 ${\mu}m$ was printed using reverse offset printing; this printing showed an electrical resistivity of 36 ${\mu}{\Omega}{\cdot}cm$ after sintering at $200^{\circ}C$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.3
• /
• pp.177-184
• /
• 2008

This experiment was carried out to breed a cold-tolerant variety of Italian ryegrass (Lolium multiflorum Lam.) in Grassland and Forage Crops Division, National Institute of Animal Science, RDA, Suwon from 1999 to 2006. ew variety, Kowinmaster as a diploid variety was light-green in leaf color and had medium and semi-erect growth habit in late autumn and early spring, respectively. Kowinmaster was 13th May in heading date as a medium-maturing variety. Especially, Kowinmaster was similar to Florida 80 in flag leaf width, longer 3cm in flag leaf length and longer 6cm in plant length than those of control variety, Florida 80, respectively. Stem width of Kowinmaster was similar to that of Florida 80. Cold tolerance of Kowinmaster was better than that of Florida 80. Dry matter yield (9,521 kg/ha) of Kowinmaster was 2% more than that of Florida 80. Feed value of Kowinmaster was 12.1% in crude protein, 70.9% in In vitro dry matter digestibility and 32.9% in acid detergent fiber that were similar to those of Florida 80, respectively, but in neutral detergent fiber, Kowimaster was 56.0% that was 1% lower than that of Florida 80.

• Journal of radiological science and technology
• /
• v.26 no.2
• /
• pp.63-69
• /
• 2003

Filtering is necessary to reduce statistical noise and to increase image quality in SPECT images. Noises controled by low-pass filter designed to suppress high spatial frequency in SPECT image. Most SPECT filter function control the degree of high frequency supression by chosing a cut of frequency. The location of cut off frequency determines the affect image noise and spatial resolution. If select the low cut off frequency, its provide good noise suppression but insufficient image quantity and high cut off frequencies increase the image resolution but insufficient noise suppression. The purpose of this study was to determines the optimam cut off level with comparison of FWHM according to cut off level in each kiters-Band-limited, Sheep-logan, Sheep-logan Hanning, Generalized Hamming, Low pass cosine, Parazen and Butterworth filter in SPECT camera. We recorded image along the X, Y, Z-axis with $^{99m}TcO_4$ point source and measured FWHM by use profile curve. We find averaged length is $9.16\;mm{\sim}18.14\;mm$ of FWHM in X, Y, and Z-axis, and Band-limited and Generalized Hamming filters measures 9.16 mm at 0.7 cycle/pixel cut off frequency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.114-121
• /
• 2001

A circuit model for active-controlled field emitter array(ACFEA) as an electron source of active-controlled field emission display(ACFED) has been proposed. The ACFEA with hydrogenated amorphous silicon thin-film transistor(a-Si:H TFT) and Spindt-type molibdenum tips (Spindt-Mo FEA) has been fabricated monolithically on the same glass. A-Si:H TFT is used as a control device of field emitters, resulting in stabilizing emission current and lowering driving voltage. The basic model parameters extracted from the electrical characteristics of the fabricated a-Si:H TFT and Spindt-Mo FEA were implemented into the ACFEA model with a circuit simulator SPICE. The accuracy of the equivalent circuit model was verified by comparing the simulated results with the measured one through DC analysis of the ACFEA. The transient analysis of the ACFEA showed that the gate capacitance of FEA along with the drivability of TFT strongly affected the response time. With the fabricated ACFEA, we obtained a response time of 15$mutextrm{s}$, which was enough to make 4bit/color gray scale with the pulse width modulation (PWM).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.5
• /
• pp.338-345
• /
• 2003

Purpose : This study was intended to perform cephalometric comparison between the patients with and without obstructive sleep apnea (OSA). The factors influencing the OSA in the lateral cephalogram was also investigated. Patient and Method : Twenty four patients who visited Sleep Disorder Clinic in Dongsan Medical Center, Keimyung University and evaluated with polysomnograph(PSG) and cephalogram were included in the study. The patients had apnea-hypopnea episode(AHI) over 10 times per hour was diagnosed as OSA after overnight PSG. To evaluate hard and soft tissue profile, cephalometric radiogram were taken at maximal intercuspation(P1) and mandibular protruding position(P2). The diffefence between the OSA and normal group were evaluated statistically and the stepwise regression analysis was applied to analyse the cephalometric influencing factors to OSA. Result : The OSA Group(n=14) had significantly higher Body Mass Index(BMI) than control group(n=10). Lower facial height(ANSGn) was longer in OSA group. However statistically significant difference was not detected in other anteroposterior craniofacial measurements. The soft palate lenth (PNS-P), hyoid position (MP-Hyoid) had positive correlation between AHI (r=0.496, r=0.413, respectively, p<0.05). However, the measurements of oropharyngeal airway was not different between the two groups. The hypothesis, the antero-posteriorly narrow oropharyngeal airway might aggravate the airway resistance and can give rise to higher AHI, was not accepted in the study. This can be attributed by inclusion of the patients performed uvulopalatopharyngoplasty because of the tonsilar or soft palate hypertrophy in the present study. The results of regression analysis revealed that PNS-P, upper airway width(Nph1), upper facial heght(N-ANS), and lower facial height(ANS-Gn) could influence the degree of AHI (F value < 0.0001, $R^2$ = 0.829). Conclusion : We suggest lateral cephalogram may utilized as a useful method to evaluate OSA. The patient with long soft palate, narrow upper airway width, long upper & lower facial height can be expected to have high risk of OSA. However, it should be emphasized the comphrehensive intraoral inspection including soft palate and tonsilar hypertrophy because lateral cepahlogram cannot visualize oropharyngeal status completely.