• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.81-87
• /
• 2002

This study was conducted to investigate the cooling efficiency and growth of tomatoes by root zone cooling device using a pad-box and cultivated system. The structure of the root zone cooling system using a pad-box was four piece of pads bonded an the side and a fan set at the bottom. Cool wind was generated by the outside air which was punched at intervals of 10 cm along three rows. Cold wind flowed to the root zone in the culture medium. The root zone cooling efficiency of cold wind generation by using a pad-box flowing through a wet-pad was determined. Major characteristic of this cuttural system consist of bed filled with a perlite medium and a ventilation pipe using PVC. The cold wind generation by a pad box (CWP) was compared to that of cold wind generation by a radiator (CWR), cold water circulation using a XL-pipe (CWX) and the control (non-cooling). When the temperature of water supplied was 16.2-18.4$^{\circ}C$, temperatures in the medium were 20.5~23.2$^{\circ}C$ for CWP 22.7~24.2$^{\circ}C$ for CWR, 22.8~24.27$^{\circ}C$ for CWX and 23.1~-29.6$^{\circ}C$ for the control. The results show that the cold wind temperature using the pad-box was lower by 1~2$^{\circ}C$ than that of cold water circulation in the XL-pipe and lower by 5~6$^{\circ}C$ than that of the control. Growth such as leaf length, leaf width, fresh weight and dry weight, was greater in three root zone cooling methods than in the control. Root activity was higher in the rat zone cooling methods than in the control. However, there was no significant difference among root zone cooling methods.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.291-298
• /
• 2020

The power generation of a PV system changes according to the weather variables, such as solar radiation and temperature. In particular, the output characteristics of photovoltaic systems, which are sensitive to changes in solar radiation, can be produced effectively and reliably in various weather conditions through MPPT (Maximum Power Point Tracking) control. This paper proposes a fuzzy-based MPPT control method to improve the efficiency and stability of the power production from a solar system. To verify the performance of the proposed method, under the same weather environment, the efficiency and stability of the newly proposed fuzzy logic were compared and evaluated empirically with P&O (Perturb and Observe), a representative algorithm of MPPT control. Furthermore, the circuits designed to improve the reliability and reliability of the hardware were manufactured from Printed Circuit Boards (PCB) to conduct experiments. Based on the results of the experiment during a certain period, the fuzzy-based MPPT proposed in this paper improved the efficiency by more than 4.4% compared to the MPPT based on the existing P&O algorithm and decreased the fluctuation width by more than 39.7% at the maximum power point.

• Culinary science and hospitality research
• /
• v.21 no.4
• /
• pp.42-54
• /
• 2015

The purpose of this study was to investigate the quality characteristics of cookies prepared with dropwort powder(0, 2, 4, 6, and 8%) for flour. The bulk density of cookie dough of groups with dropwort powder shows significantly differences when compared to the control group. The pH of cookie dough and cookies were decreased by addition of dropwort powder. The moisture content of the groups with dropwort powder was higher than that of the control group. The weight and width of the groups with dropwort powder was lower than those of the control group. The spread ratio of the groups with dropwort powder was lower but the loss rate of cookies was higher than those of the control group. In color, the L, a, and b value was decreased significantly by addition of dropwort powder. The hardness of the groups with 2% and 4% dropwort powder was higher than that of the control group. DPPH radical scavenging activity of the control group was 20.62%, whereas the groups with dropwort powder ranged from 32.11~65.10%. Sensory evaluation scores in terms of appearance, flavor, taste, texture, and overall preference of groups with 2% and 4% of dropwort powder did not show any significantly differences when compared to the control group. Based on the above results, using less than 4% of the dropwort powder would be proper to make cookies.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.791-803
• /
• 2007

The purpose of this study was to evaluate exophytically vertical bone formation in residual ridge of the beagle dog by the concept of guided bone regeneration with a titanium reinforced e-PTFE membrane combined with irradiated cancellous human bone. Twelve male beagle dogs(mean age 1.5 years and mean weight 12kg) were used for this study. The alveolar ridges after extraction of all mandibular premolars were surgically and horizontally removed. At 8 weeks after extractions, full-thickness flap was reflected and cortical bone was removed with round bur and copious irrigation. Rectangular parallelepiped(10mm in length, 5mm in width, and 4mm in height) bended with titanium-reinforced e-PTFE(TR e-PTFE) membrane was placed on the decorticated alveolar ridge, fixed with metal pins and covered with full-thickness flap and assigned as a control group. Test groups ere treated with TR e-PTFE membrane filled with irradiated cancellous human bone. Of twelve beagle dogs, four control dogs and four test dogs without membrane exposure to oral cavity were sacrificed at 8 and 16 weeks respectively. The surgical sites were dissected out, fixed in 4% buffered formaldehyde, dyed using a Villanueva staining technique, and processed for embedding in plastic resin. The cutting and grinding methods were routinely processed for histologic and histomophometric analyis of exophytic bone formation as well as statistical analysis. The results of this study were as follows: 1. Exophytic bone formation in the both of experimental groups was increased respectively after surgery from 23.40% at 8 weeks to 46.26% at 16 weeks in the control groups, from 40.23% at 8 weeks to 47.11% at 16 weeks in the test groups(p<0.05). 2. At 8 weeks after surgery, exophytic bone formation was made 40.23% in the test groups and 33.40% in the control groups. Exophytic bone formation was significantly made in the test group more than in the control group. At 16 weeks after surgery, exophytic bone formation was made 44.11% in the test groups and 46.26% in the control groups. Exophytic bone formation was made in the test groups more than in the control groups, but there was no statistically significant differences. 3. The membrane was fixed with metal pins to closely contact it to the bone surface. So, collapse and deviation of the membrane could be prevented and in growth of connective tissue also could be blocked from the periphery of the membrane. On the basis of these findings, wee suggest that intraoral experimental model for exophytic bone formation may be effective to evaluate the effect of bone graft material. And it indicates that combined use of membrane and ICB graft material is more effective than use of membrane only for exophytic bone formation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.52-52
• /
• 2022

Recently, PE (polyethylene) film has been used increasingly in com cultivation. However, PE films often cause soil and environment contamination. In order to reduce this problem, many researches have been carrying out studies on biodegradable films (BF) that are easily decomposed by soil microorganisms. Therefore, this study was conducted to determine which BF is optimal for growth and yield of com crops while also having the highest rates of film decomposition. BFs Farmsbio (Farm Hannong), Heulgro Film (Sejin Bio), Vonto Film (Eco-Hansung) as well as a selected PE film were used in this study. For the control, we used crops grown without any kind of mulching. Experimental fields were fertilized according to conventional cultivation methods, tilled, and then covered by either BF or PE. After 1 week, com (cv. MIBECK2ho) at the 3-leaf stage (16 days after seeding) was transplanted. Plant height was measured at 18 and 32 days after transplanting and heading stages. Yield components and yield were also measured at harvest. In addition, pH, EC, and decomposition and light transmittance levels of films were investigated during the experimental period. Daily average temperature, relative humidity and organic matter in soils were also measured during the experimental period. There was no significant difference in plant height, heading date, and silking between crops with BFs and PE, but the crops grown with BFs and PE films reached higher growth parameters in a shorter amount of time than the crops in the non-mulching control. Additionally, there were no significant differences in yield components such as length of ears, ear width, ear weight, and yield in crops that were grown using films or crops in the control plot. Light transmittance and decomposition levels of films generally increased with time after transplanting, and was highest in the Heulgro film than other BFs. Soil pH and organic matter in crops using BFs and PE films were significantly higher than in the control plot at 99 and 113 days after transplanting. In general, the EC contents in the control plot was lower than in crops using BFs and PE films. The average daily moisture in soil was higher when BFs and PE films were used than in the control plot. However, the daily average soil temperature was higher in crops using BFs and PE films than in the control plots at the beginning of the experimental period, but there was no consistent difference in soil temperature towards the later part of the experimental period. Therefore, the BFs used in this study were shown to be helpful without causing negative impacts on the growth and yield of com.

• The Korean Journal of Physiology
• /
• v.26 no.2
• /
• pp.159-166
• /
• 1992

The present study was designed to evaluate effects of intermittent electrical stimulation of the sciatic nerve on the atrophic response of antigravity muscles, such as the soleus (slow m.) and medial gastrocnemius (fast m.) muscles. Rats (Sprague-Dawley, 245-255g) were subjected to a hindlimb suspension and divided into three groups : one was with hindlimb suspension (MS) and another with hindlimb suspension plus intermittent electrical stimulation of the sciatic nerve (HS ES). Control group (CONT) was kept free without strain of the hindlimb. After 7 days of hindlimb suspension, the soleus and medial gastrocnemius muscles were cut at their insertion sites, and were then connected to the force transducer to observe their mechanical properties. Optimal pulse width and frequency of electrical stimulation were 0.2ms, 20Hz for the soleus muscle and 0.3ms, 40Hz for the medial gastrocnemius muscle under supramaximal stimulation. Body weight and circumference of the hindlimb were significantly decreased in HS and HS-ES groups compared with the control group. In HS-ES group, however, the weight of the soleus muscle was not different from that in the control group while the weight of the medial gastrocnemius muscle was lower than that in the control group. In HS group, mechanical properties of muscle contraction including contraction time, half relaxation time, twitch tension, tetanic tension, and fatigue index of both muscles were significantly decreased compared with the control group except for twitch tension and tetanic tension of medial gastrocnemius muscle. The degree of atrophy of the soleus muscle in HS group was more prominent than that of the medial gastrocnemius muscle. Twitch tension and fatigue index of the soleus muscle and fatigue index of the medial gastrocnemius muscle in HS-ES group were not different from those of the control group. While mechanical properties of the soleus muscle examined were all significantly increased in HS-ES group compared with HS group, only contraction time and fatigue index of the medial gastrocnemius muscle were significantly increased in HS-ES group. These data indicate that intermittent electrical stimulation may be useful in prevention of muscle atrophy.

• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.897-909
• /
• 2015

This study was conducted to evaluate the effect of weed control on disease incidence, plant growth and fruit quality, and to provide effective method to farmers at the vineyard. At the raincoat greenhouse cultivating 'Campbell Early', several weed controlling methods were compared to the control. Mean temperature of plots between soil covering (C.B., W.F., S.N., P.F. and R.H.) and non soil covering (M.W.2, M.W.3 and U.T.) were similar with $26.2^{\circ}C$ (July) and $25.8^{\circ}C$ (Aug.), but humidity of soil covering was sharply decreased in late-July under 40%. Soil water were all higher in soil covering plots than that of non-soil covering, however, soil temperature was recorded lower in soil covering plots. Disease incidence of Peudocercospora vitis according to soil coverings had effect on black plastic film mulching by decreasing grapevine leaf spot to 85% in July, 69% in August, compared to the control, with showing the smallest lesion incidence in FMB. Among growth characters, internode length and internode width of black plastic film mulching was higher than that of the control. SPAD value of black plastic film mulching was recorded the highest. It was not significant among the treatments, but brix was recorded highly in black plastic film mulching with $14{\sim}15^{\circ}Brix$.

• Journal of Bio-Environment Control
• /
• v.26 no.2
• /
• pp.133-139
• /
• 2017

This study investigated the effects of NaCl and jasmonic acid (JA) on the growth and physiological responses of spearmint (Mentha spicata L.). Spearmint was hydroponically grown for 3 weeks in modified Hoagland solution containing 0 (untreated control), JA ($20{\mu}M$ JA pretreatment), NaCl (50 mM NaCl treatment) and JA + NaCl ($20{\mu}M$ JA pretreatment + 50 mM NaCl treatment). Growth characteristics, chlorophyll, vitamin C, proline contents, DPPH scavenging activity and inorganic ion contents were evaluated. As a results, there were significant decreases in the plant height, leaf length, leaf width, and fresh weight of plants, treated with NaCl compared with control. On the other hand, the dry matters of shoot and root treated with JA + NaCl combination were better than control or NaCl treatment. Chlorophyll a and b contents in JA treatment was the highest. Vitamin C, antioxidant activity, and proline content in shoot were increased in NaCl treatment which showed low level of growth rate. The K/Na ratio, which is known to indirectly reflect the balance of ion uptake, was higher in a single treatment of JA than the control group, while lower in salt treatment (NaCl and JA + NaCl) because of high $Na^+$ absorption. In conclusion, these results showed that moderate stress treatment such as low level salt treatment and plant growth regulator jasmonic acid (JA) application would be potential strategies to improve the quality of spearmint by inducing the accumulation of secondary metabolites containing high antioxidant activity and essential oil.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.322-326
• /
• 2013

This study was tried to control the weedy rice using minimum tillage direct seeding of rice on dry paddy. Minimum tillage direct seeding on dry paddy is tilled with 4 cm in width at 27 cm intervals by 1-shaped rotary blade. Using this cultivation method can control weedy rice effectively by minimizing the soil disturbance. In this study, weedy rice was firstly emerged at April 28 in 2012. After 11 days emergence rate of weedy rice at May 9 was 61.9%. At this time rice was sown and then herbicides was treated at 10 and 15 days after sowing. When herbicides was treated at 10 days after sowing the control effect was 89-96%, and when treated at 15 days the control effect was 97-99%. However emergence of weedy rice differ according to the year and year. It was thought to be affected by April average temperature and total precipitation. So, for effective weedy rice control and stable rice yield, it was considered that irrigation at April 15-20 to induce the emergence of weedy rice is required.