• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.40-47
• /
• 2017

In this paper, a small signal model for grid-connected inverter with unipolar pulse width modulation method is presented. Small-signal analysis allows to predict the stability and dynamics of the inverter. To regulate output voltage and to achieve power factor correction, inverter has two control loops. Loop gains are useful to identify the stability for multi-loop controlled system. Based on small-signal model, controllers are designed to improve audio susceptibility and output impedance characteristics. Proposed small-signal model and controllers are verified by PSIM simulation and experiments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1091-1096
• /
• 2011

The main factors of radar signals used in electronic warfare are Radio Frequency(RF), Pulse Repetition Interval(PRI), Pulse Width(PW), Scan Parameter(SP) and so on. This radar signals may have some important information for the electronic warfare. So, there is a necessity for making a threat database to decide whether the radar signal is a threat or not. When the electronic support system collects some threat radar signals, it needs the search band to control the receivers and filter banks of the system. In this paper we propose search band implementation considering the type and center frequency of the receivers of the electronic support system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.853-858
• /
• 2010

DRAM package substrate has been demonstrated using a thick alumina layer produced by aluminum anodization process. To apply a transmission-based design methodology, 2 dimensional electromagnetic simulation is performed. The design parameters including signal line width/spacing and alumina's thickness are optimized based on the simulation analysis and are verified with the fabrication and the measurement of the test patterns on the anodic alumina substrate. DDR2 DRAM package is chosen as a design vehicle. Aluminum anodization technique has been applied successfully to fabricate new DRAM package substrate.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.502-503
• /
• 2014

HEV를 구동시키는 인버터 시스템은 고정 주파수로 스위칭하는 PWM(Pulse Width Modulation)방식으로 구동이 된다. 고정주파수를 이용한 PWM은 전류제어의 주기가 일정하기 때문에 디지털 화가 쉬운 장점을 가지고 있다. 하지만 그로인한 특정 주파수 부분에 고조파가 생성이 되게 되는데 이 고조파로 인해 소음이 유발된다. 하지만 이 소음을 억제하기 위해서 랜덤PWM을 사용하게 되면 전류 제어가 고정주파수로 스위칭하는 PWM에 비해서 완벽하게 되기가 어렵다. 따라서 본 논문에서는 HEV의 소음을 저감시키면서 동시에 전류제어도 가능한 랜덤PWM기반의 전류제어 방법을 연구하였다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.57-58
• /
• 2015

대용량 분산 발전원이 증가하면서 이러한 대용량 분산 발전을 효율적으로 운전하기 위한 많은 연구가 진행되고 있다. 본 논문에서는 멀티레벨 인버터 토폴로지 중 NPC와 T-type 인버터의 중성점 전압제어와, DSVPWMx(Discontinuous Space Vector Pulse Width Modulation) 방식을 적용하여 두 개의 멀티레벨 인버터에서 발생하는 효율과 제어방식의 차이를 시뮬레이션 하였다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.877-879
• /
• 1993

In this paper, the voltage control is applied to the adjustable speed operation of BLDC motor with the trapezoidal back emf waveform. Torque chrateristics of BLDC are investigated through Fourier analysis when the pulse width modulation inverter is applied. Also, this paper consisders the theoretical problem of eliminating some harmonic components in inverter output waveforms, which, in turn, allows to remove some ripple components. Numerical technique is applied to solve the transcendental equations of the problem by the computer.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1416-1417
• /
• 2007

The high frequency pulsed power system is widely available for use in high frequency generator applications. We designed and fabricated our own high frequency pulsed power system to obtain very sort pulse width and high peak value and investigated microbe removal characteristics using it. This paper introduces a simple high voltage high frequency pulsed power system for removing various bacteria caused by dirty water. This system include power supply circuit, switching MOSFET, and flyback converter. We can also control the switching using a PIC one chip microprocessor. As a result, we can obtain good removing characteristics of various bacteria by adjusting the charging voltage, the pulse repetition rate and the electrical field inducing time.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1410-1412
• /
• 2005

A novel dimming algorithm for the electronic ballast of the electrodeless lamp is proposed. The proposed algorithm is based on the burst dimming method and controls the duty ratio for the two switches of the electronic ballast by pulse width modulated signal. The preposed algorithm was implemented by a fully digital circuit using EPLD device. To verify the validity of the proposed algorithm, the implemented control circuit was applied to the electronic ballast for a 100W electrodeless fluorescent lamp. As a result, the wide illumination dimming range from 5% to 100% was obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.7-16
• /
• 2010

Physical fundamentals of ultrashort femtosecond lasers are addressed along with emerging applications for precision manufacturing and metrology. Femtosecond lasers emit short pulses whose temporal width is in the range of less than a picosecond to a few femtoseconds, thereby enabling extremely high peak-power machining with less thermal damages. Besides, the broad spectral bandwidth of femtosecond lasers constructed in the form of frequency comb permits absolute distance measurements leading to ultraprecision positioning control and dimensional metrology.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.71-74
• /
• 2008

In order to resolve the problems which appear after the clean large ingot production process, the impurities which are involved in the steel smelting process should be removed by developing cleaner materials. Through the rationalization of cogging process that is the first forging process of large ingot the quality is to be improved. For the sake of the optimization of an open die forging process and the improvement of the subject matter frequency ratio, a hazard precise die forging process must be developed and a Near Net Shape Forming accomplished. As a result, energy can be reduced by minimizing an after control process. In order to produce large axes and other forming parts, processing techniques are to be developed. In this context, this paper is a study about a reduction ratio, dies width ratio and rotary angles, the amount of overlap, and intends to analysis cogging processes, utilizing Deform-3D cogging module