• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.440-443
• /
• 2007

In this paper, microstrip antenna is designed for industrial-scientific-medical(ISM)band of S-Band. We proposed that radiation element of antenna, which is rectangle patch shape. The feeding structure used L-shaped structure. Center frequency and -l0dB bandwidth are investigated by change of length and width in patch plane. And maximum gain, front to back ratio and 3dB beam width is presented by simulation radiation pattern of antenna in frequency ISM Band. The center frequency is 2.45GHz, band width is $2.314{\sim}2.577GHz$ with 263MHz(11%). And the antenna maximum gain is 9.3dBi, 3dB beam width E-plane is $52.5^{\circ}$, H-plane is $64.7^{\circ}$.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.49-54
• /
• 1991

In this study the correlation between material constants and microwave absorbing characteristics of ferroxplana composite microwave absorber used in X-band was investigated. The real part of permeability(${\mu}_{r}'$) was decreased and the imaginary part of permeability(${\mu}_{r}"$) of ferroxplana composite was increased with increaing ferroxplana loading ratio(F/R). The frequency showing maximum attenuation was shifted to lower frequency with increasing absorber thickness. The absorber 2.6 mm thick showed good band width property and 3.2 mm thick showed good attenuation property. From the apphcation of ferroxplana composite's material constants to the region of material constants which satisfy broad band width, it is found that the absorbing characteristics were estimated quantitatively. Estabhshment of material constants' region which satisfies broad band width can make practical application to design of high performance ferrite microwave absorber.

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.55-69
• /
• 2006

The purpose of this study is to evaluate the differences of visual effects by variations in the location and width of the waist band of one-piece dress. The stimuli are 24 samples: 8 variations of the location of the waist band and 3 variations of the width of the waist band. The data has been obtained from 50 fashion design majors. The data has analyzed by Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: According to the result of factor analysis of the visual effects based on the changes in the location and width of waist bands for one-piece dress, four factors were identified - verticality of whole-body, horizontality of upper-body, curves of lower-body and shape of breast. Whole-body verticality and upper-body horizontality were found to be the most important factor among them. In all of the four factors of the visual effects, significant differences were observed according to the location of the waist bands for one-piece dress. The visual effects were evaluated positively when the waist bands were positioned above the natural waist line and negatively when the waist bands were positioned below the natural waist line. In addition, significant differences were observed in the visual effects according to the width of waist bands when the waist bands were positioned above the natural waist line, and visual effects were better when the band width was 3.5cm and 4.5cm than the others. The interaction of the visual effect showed significant differences in horizontality of upper-body, curves of lower-body and shape of breast.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.637-642
• /
• 2020

In this study, the SLB(Sidelobe Blanking)/BLB(Blacklobe Blanking) design of the VHF band radar using the low-frequency band having a relatively larger beam width than the S-band or X-band radar. The antenna of the VHF band has a relatively large beam width, so it is reflected from the side lobe. If the reflected target signal is not processed into sidelobe, the false alarm rate of the radar increases by recognizing it from the main lobe signal. This method of SLB blocking is the elimination of the side lobe signal in the front of the array antenna using the central radiating element of the array antenna, and the blocking of side lobe signal from the antenna rear through BLB receiver block. After completed the radar implementation, The function of blocking of side lobe signals was confirmed through the system unit test by Simulated signal generator. Through this study, it will be used in the implementation of the side-lobe blocking technology of the array antenna for low-frequency band radar with large antenna size and beam width in the future.

• Journal of the Korean Ceramic Society
• /
• v.45 no.4
• /
• pp.208-213
• /
• 2008

In this study, helical antenna with microwave ZST ceramics was designed using finite element method and developed. Studied parameters are relative dielectric constant of the dielectric core and the width of the conduction metal band of the antenna. As shown in the results, the center frequency of the antenna was decreased as the dielectric constant increased. Also beam width of the antenna increased as both the dielectric constant and the conduction band width increased. Based on the designed optimal shape, the manufactured antenna has the good beam width at center frequency 1.58 GHz.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1994.04a
• /
• pp.43-48
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite which has very wide band frequency characteristics is proposed and discussed. The wide band electromagnetic wave absorber can be designed by the proposed equivalent material constants method for the regions varying spatially in the shape of ferrite. Furthemore the wide band ferrite electromagnetic wave absorbers with taper which have not only excellent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity were designed.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.2
• /
• pp.151-158
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite, which has very wide band frequency characteristics, is proposed and discussed. The wide band electroma-gnetic wave absorber can be designed by the proposed equivalent material constants method for the re-gions varying spatially in the shape of ferrite. Futhermore, the wide band ferrite electromagnetic wave absorber with taper, which have not only exce-llent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity, were designed.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.388-391
• /
• 2015

본 연구에서는 탄소로 이루어진 그래핀과 붕소와 질소의 합성물인 h-BN을 적절하게 섞어, 밴드갭(band gap)의 변화를 범밀도함수이론(DFT)을 통하여 설계하려고 한다. 본 연구에서 태양전지의 가장 높은 효율을 가지기 위한 밴드갭 1.2eV 가지는 모델을 설계하려고 한다. Armchair 방향으로 B와 N을 도핑을 하여 width에 따른 Nanorribbons 형태를 만들어 밴드갭(band gap)의 변화를 살펴 볼 것이다. 그래핀과 h-BN을 각각 고정시키며 다른 한쪽의 width를 늘리면서 밴드갭(band gap)의 변화도 살펴 볼 것이다. 그래핀와 h-BN의 비가 5:3일 때 1.14eV로 가장 1.2eV에 비슷하게 나왔고 3:5일 때 1.12eV로 그 다음으로 가장 가까운 결과를 얻을 수 있엇다. 또한 비슷한 밴드갭을 가지더라도 그러한 원자 구조가 얼마나 안정적인지를 알기 위해 cohesive 에너지를 계산 할 것이다. 이러한 결과로 인해 태양에너지 연구에 큰 이바지를 할 수 있다.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.399-402
• /
• 1988

In this paper, the relationship between stability and gain band-width product (GB) is clear ed by evaluating the feedback gain in the buck-boost switching regulator. Especially, considering the effect of the right-half-plane pole on the stability, we found available region of GB on the stability with the one pole compensation for the feedback circuit.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1994.10a
• /
• pp.59-68
• /
• 1994

A wide band design method of an double layerred electromagnetic wave absorber sintered ferrite which has a flat and an anti-grid shape layers is proposed and discussed. The wide band electomagnetic wave absorber can be designed by the equivalent material constants method for the each layer, As a result the wide band ferrite electonmagnetic wave absorber with the band width of 30MHz to 3670, 3680 or 3690MHz were designed under the tolerance limits of -20dB reflectivity.