• ETRI Journal
• /
• v.31 no.3
• /
• pp.321-323
• /
• 2009

A wideband beamforming algorithm for estimating the azimuth angle, elevation angle, velocity, and range using a planar phased radar array with antenna switching is proposed. It uses the time-variant steering vector model. Simulation results illustrating the performance of the proposed beamformer are presented.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.145-153
• /
• 2019

Adaptive beamforming methods are known to suppress sidelobes and improve detection performance of weak signal by constructing weight vectors depending on the received signal itself. A standard adaptive beamforming like the MVDR (Minimum Variance Distortionless Response) is very sensitive to mismatches between weight vectors and actual signal steering vectors. Also, a large computational complexity for estimating a stable covariance matrix is required when wideband beamforming for a large-scale array is used. In this paper, we exploit the WBRCB (Wideband Robust Capon Beamforming) method for stable and robust wideband adaptive beamforming of a passive large uniform line array sonar. To improve robustness of adaptive beamforming performance in the presence of mismatches, we extract a optimum mismatch parameter. WBRCB with extracted mismatch parameter shows performance improvement in beamforming using synthetic and experimental passive sonar signals.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.395-402
• /
• 2016

In this paper, a wideband adaptive beamforming approach for an acoustic vector sensor linear array is presented. It is a very important issue to estimate the stable covariance matrix for adaptive beamforming. In the conventional wideband adaptive beamforming based on coherent signal-subspace (CSS) processing, the error of bearing estimates is resulted from the focusing matrix estimation and the large number of data snapshot is necessary. To alleviate the estimation error and snapshot deficiency in estimating covariance matrix, the steered covariance matrix method in the pressure sensor is extended to the vector sensor array, and the subarray technique is incorporated. By this technique, more accurate azimuth estimates and a stable covariance matrix can be obtained with a small number of data snapshot. Through simulation, the azimuth estimation performance of the proposed beamforming method and a wideband adaptive beamforming based on CSS processing are assessed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.380-386
• /
• 2013

This paper represents an adaptive beamforming technique to suppress interference or jamming signals in wideband. In order to maintain low side lobe level(SLL) at an antenna element level, Taylor-weighting was used. Also, to make a nulling beam pattern toward jammer's directions in wideband, we used the modified Loaded Sample Matrix Inversion(LSMI) algorithm and Tapped Delay Line(TDL). To verify the proposed algorithm, we applied it to a rectangular array antenna. Finally, the results show beam pattern with low SLL and jammers suppression.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2005

This paper presents a wideband LPA (local polynomial approximation) beamforming algorithm that is appropriate for wideband moving sources. The Proposed wideband LPA algorithm adopts STMV (steered minimum variance) method that utilizes a steered covariance matrix obtained from multiple frequency components in one data snapshot, instead of multiple data snapshots in one frequency bin. The wideband LPA cost function is formed using STMV weight vector. The Proposed algorithm searches for the instantaneous DOA and angular velocity that maximize the wideband LPA cost function. resulting in a higher resolution performance than that of a DS LPA beamforming algorithm. Several simulations using artificial data and sea trial data are used to demonstrate the performance of the Proposed algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.6
• /
• pp.478-486
• /
• 2017

In this paper, we propose an algorithm for the wideband beamforming in a conformal phased array antenna by compensating the errors. For the wideband beamforming, we used the True Time Delay(TTD), which was fabricated on the RF circuit board to obtain long delay lines. Beamforming errors in the conformal array antenna are the mutual coupling between the array elements, the dispersive error in the TTD circuit, and the quantization error by the digital control. We apply the compensation algorithm to the conformal phased array antenna of wideband 2~4 GHz, and verify the usefulness by comparing the results with the experiment results.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.2
• /
• pp.87-91
• /
• 2008

In this paper, the adaptive chirp beamforming method is proposed to solve the bias problem in the direction-of-arrivals (DOAs) estimation of the wideband chirp signals which have an identical time-frequency parameter and are emanated from different directions. The source location bias results from the interferences impinging on the array from the other directions. The proposed method exploits the time-frequency structure of the chirp signal based on STMV (STeered Minimum Valiance) to improve the DOA estimation performance by minimizing the chirp interferences effectively. Simulation results show the DOA estimation performance achieved by the proposed method as compared to the conventional methods.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.3
• /
• pp.49-54
• /
• 1999

In this paper, we propose a new method to estimate the initial DOA of a new appearing source in wideband multisource beamforming and tacking with array sensor position calibration algorithm. By using a beampattern formula for initial DOA detection, the proposed method keeps estimation error within possible tracking range and can be applied to several beamformers with different mainlobe width by adjusting DOA resolution. The simulation results show the performances of source detection and tracking.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.459-462
• /
• 2004

간섭신호가 광대역이거나 빠르게 기동할 경우 기존의 협대역 적응 빔형성(NABF: Narrowband Adaptive Beam-forming)기법의 성능이 크게 저하되는 것으로 알려져 있다. 이는 간섭신호가 빠르게 기동할 경우 추정된 빔패턴의 널(null)을 벗어나게 되고 협대역을 가정하여 얻어진 빔패턴의 널은 광대역 신호일 경우 이를 효과적으로 제거할 수 없기 때문이다. 이러한 환경에서 견실한 성능을 얻기 위해 NABF 기법에 미분제한조건을 주어 간섭신호 방향의 널 폭을 넓히는 기법이 알려져 있다. 본 논문에서는 광대역의 기동하는 간섭신호에 보다 견실하게 대처하기 위해 광대역 적응 빔형성 (WABF: Wideband Adaptive Beamforming)기법에 미분제한 조건을 적용하였다. 그리고 빠르게 기동하는 광대역 간섭신호가 존재하는 환경에서 모의실험을 수행하여 제안한 기법과 기존의 NABF기법 성능을 비교한다.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2386-2388
• /
• 2005

As anti-crash and pre-crash systems in vehicles become more extensively used, the need for high performance short-range radars is playing an increasing role. This paper presents the design of a micromachined, ultra-wideband beamformer centered at 24 GHz for automotive short-range radar systems. This beamformer is a Butler matrix designed using ultra-wideband transmission-line couplers, which consist of a multilayered structure that exhibits wider bandwidth compared to conventional microstrip branch-line couplers. The circuit has been designed on a quartz substrate, and to achieve the desired coupling, lines suspended on BCB layers located at specific parts of the circuit were used, achieving a three metal layered structure in form of wide microstrips, that give low loss and a wideband response. In this paper the design and fabrication procedure of the proposed beamformer are fully described.