• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.79-84
• /
• 1990

Analog systems could not fully deal with instrumentation and control facilities in power plants since these facilities have become more and more complex on account of various needs for large power generation capacity highly cost effective operation to conserve energy and operation management to prevent pollution. Digitalizations of control device and augmentations of control informations increased the necessity of fiber optic data networks which have excellent noise immunity and high quality wide-band with information transfer capability. The goal of this study is to offer a fiber optic data-way system which has high reliabilities, high data transmission rates and small cable ducts with large transmission capacities for the instrumentation and control of power plants.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.11
• /
• pp.100-105
• /
• 2014

In this paper, Uninterruptible Power Supply(UPS) Inverter system using Carrier Frequency Modulated PWM (CFM-PWM) is proposed to reduced harmonics and electromagnetic noise. Power conversion of UPS system is executed by the ON-OFF operation of semiconductor switching devices. However, this switching operation causes the surge and EMI which deteriorate the reliability of the UPS system. This Problems improved by Random PWM switching method. The simulation results of the proposed system was compared with the system using conventional method using Matlab/Simulink. The results show that the output voltage and current harmonics of the proposed UPS system significantly decreased and spread into wide band area by the proposed Carrier Frequency Modulated PWM(CFM-PWM) method based on the Space Vector Modulation.

• Korean Journal of Optics and Photonics
• /
• v.11 no.2
• /
• pp.130-134
• /
• 2000

In this paper, the configuration of a reflectIve bistable tWIsted nematic (BTN) liquid crystal cell is optmnzed for high contrast and high brightness operation. We searched for the optimum opncal parameters of a reflective BTN cell by calculating its optical performances at 3 wavelengths; red, green, and blue. By studying the effect of each optical parameter on the optical performances, we found that the angle of !he polmlzer IS more important than any other opnea! parmlleters iu the deSIgn of a reflective BTN cell. We fablicated a reflective BTN cell with a wide-band retardation Him, whose measmed contrast ratio is 10.6: 1. .6: 1.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.13-20
• /
• 1989

An accurate design method for rectangular microstrip patch antenna that can be applied to wide range of frequencies (C-band to X-band) is proposed. With due regard the frequency dependent effective dielectric permittivity to design formula, the inaccuracy of previous design formulae can be overcome. The results predicted by new procedure are compared well experimental results that had varying operation frequencies between 7GHz and 15GHz. Antennas are fabricated over microwave substrates with the same dielectric permittivity and thickness. Radiation power patterns are also measured and they well with theoretical values.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.134-139
• /
• 2013

This paper describes design of a RF frequency synthesizer for the MBOA UWB systems with $0.13{\mu}m$ silicon CMOS technology. To generate effective clock signal of the MBOA novel technique which uses large scale multiplication in band of low frequency and small scale multiplication in band of high frequency has been used to reduce oscillation bandwidth of VCO. To get good performance of high speed and wide band operation characteristics a VCO using PMOS core structure and a frequency divider using super dynamic structure used in design of PLL circuit.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.4
• /
• pp.267-273
• /
• 2007

A fractional-N frequency synthesizer supports quadruple bands and multiple standards for mobile broadcasting systems. A novel linearized coarse tuned VCO adopting a pseudo-exponential capacitor bank structure is proposed to cover the wide bandwidth of 65%. The proposed technique successfully reduces the variations of KVCO and per-code frequency step by 3.2 and 2.7 times, respectively. For the divider and prescaler circuits, TSPC (true single-phase clock) logic is extensively utilized for high speed operation, low power consumption, and small silicon area. Implemented in $0.18-{\mu}m$ CMOS, the PLL covers $154{\sim}303$ MHz (VHF-III), $462{\sim}911$ MHz (UHF), and $1441{\sim}1887$ MHz (L1, L2) with two VCO's while dissipating 23 mA from 1.8 V supply. The integrated phase noise is 0.598 and 0.812 degree for the integer-N and fractional-N modes, respectively, at 750 MHz output frequency. The in-band noise at 10 kHz offset is -96 dBc/Hz for the integer-N mode and degraded only by 3 dB for the fractional-N mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.891-897
• /
• 2009

In the satellite communications, the frequency sharing with other services is important because the service coverage is generally very wide and overlaps with those of other wireless services. This paper introduces a new technique to mitigate interference into the terrestrial stations from the Earth station in the same frequency band by means of band segmentations which are portions of the overall operation frequency band divided by frequency reuse factor. We consider a multi-beam satellite system, where frequency bands are reused in each satellite cell. The terrestrial stations use band segmentations of adjacent satellite cells, and this may decrease the interferences. By this way, the terrestrial and satellite systems can share the same frequency bands efficiently. The simulation is performed at frequency reuse factors, seven and three. The simulation results show that the proposed method can highly reduce the interference level to -168 dBW or -163 dBW depending on the considered frequency reuse factor from -117 dBW at the 90% link availability.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.503-510
• /
• 2007

This paper proposes the design scheme of internal triple band antenna intended for using in GSM900, DCS1800, and PCS1900 bands. The suggested folding metal plates of the two branches are mounted on a dielectric coated ground plane for size miniaturization and durability. Return losses are overlapped when length of metal branches are controlled. This is important technique for wide band operation. For the suggested antenna geometry its return loss was calculated by HFSS 9 simulator, and was shown to be -10 [dB] less within the required band. Also, gain and radiation pattern of antenna were measured using far field measurement system in an anechoic chamber. The measured peak gain is more than 3.0 [dBi], and the average gain is over -1.0 [dBi] for the triple band, which is regarded as satisfactory for the internal antenna application. Also, the radiation pattern for two frequencies shows a similar shape each other within the required band.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.224-232
• /
• 2013

This paper describes composite cavity-backed crossed scythe-shaped dipoles with wide-beam circularly polarized (CP) radiation for use in Global Navigation Satellite Systems. Each branch of the dipole arm contains a meander line, with the end shaped like a scythe to achieve a significant reduction in the size of the radiator. For dual-band operation, each dipole arm is divided into two branches of different lengths. The dipoles are crossed through a $90^{\circ}$ phase delay line of a vacant-quarter printed ring to achieve CP radiation. The crossed dipoles are incorporated with a cavity-backed reflector to make the CP radiation unidirectional and to improve the CP radiation beamwidth. The proposed antennas have broad impedance matching and 3-dB axial ratio bandwidths, as well as right-hand CP radiation with a wide-beamwidth and high front-to-back ratio.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.312-318
• /
• 2005

Mid-span spectral inversion (MSSI) has to utilize high optical pump power, for its operation principle is based on a nonlinear optical wavelength conversion. In this paper, a low pump-power operation of MSSI-based chromatic dispersion compensation (CDC) has been achieved successfully, for the first time to our knowledge, by introducing a noise pre-reduction scheme in cascaded wavelength conversions with periodically poled $LiNbO_3$ waveguides at a relatively low operation temperature. As preliminary studies, phase-matching properties and operation-temperature dependence of the wavelength converter (WC) were characterized. The WC pumped at 1549 nm exhibited a wide conversion bandwidth of 59 nm covering the entire C-band and a conversion efficiency of -23.6 dB at 11 dBm pump power. CDC experiments were implemented with 2.5 and 10 Gb/s transmission systems over 100 km single-mode fiber. Although it is well-known that the signal distortion due to chromatic dispersion is not critical at a 2.5 Gb/s transmission, the clear recovery of eye patterns was identified. At 10 Gb/s transmission experiments, eye patterns were retrieved distinctly from seriously distorted ones, and notable improvements in bit-error rates were acquired at a low pump power of 14 dBm.