Recently developed Austenite stainless steel,309L was to overlay on 3Cr-1Mo-V-Ti-B steels, using Electroslag welding process, which wide electrodes were adopted. Transition region in welding interlayer relating to disbonding crack was investigated. Also. the effect of welding condition on the width of transition region and coarsening grains of the austenite were studied.1) With increasing welding speed the width of martensite at transient region was increased, but the amount of delta ferrite in weld metal was reduced, being fine grained.2) The form of martensite at the transition region was occured by reversible transition region, leading to increasing Ms point.3) With increasing welding speed, the grain of austenite formed at the welding interface was finer. With increasing welding current under the same welding speed, the grain size of the austenite was finer. At high current, original grain size of the austenite is coarse, but the austenite has fine grains because the austenite was transformed to martensite during cooling.4) In the case of high welding speed, the width of martensite at the welding interface was increased, but the grain size of austenite at the welding interface was finer. This indicates that the inhibition of disbonding crack may be achieved through dispersening fine carbides in the grain boudary.(Received August 3, 1999)
Recently developed Austenite stainless steel, 309L was used to overlay on 3Cr-1Mo-V-Ti-B steels, using Electroslag welding process, which wide electrodes were adopted. Transition region in welding interlayer relating to disbonding crack was investigated. Also, the effect of welding condition on the width of transition region and coarsening grains of the austenite were studied. 1) With increasing welding speed the width of martensite at transient region was increased, but the amount of delta ferrite in weld metal was reduced, being fine grained. 2) The form of martensite at the transition region was occurred by reversible transformation during cooling since the interdiffusion of Cr and Ni from weld metal and Fe and C from base metals at the transition region, causes to lowering the concentration of Cr and Ni at the transition region, leading to increasing Ms point. 3) With increasing welding speed, the grain of austenite formed at the welding interface was finer. With increasing welding current under the same welding speed, the grain size of the austenite was finer. At high current, original grain size of the austenite is coarse, but the austenite has fine grains because the austenite was transformed to martensite during cooling. 4) In the case of high welding speed, the width of martensite at the welding interface was increased, but the grain size of austenite at the welding interface was finer. This indicates that the inhibition of disbonding crack may be achieved through dispersening fine carbides in the gain boundary.
Taegu is notorious as hot and dry summer among Korea cities. One of the most important goals of the open space planning is to ameliorate urban climate of the city. The objective of this research is to evaluate the thermal mitigation effect of the cool islands in Taegu metropolitan city. Cool islands of this paper includes parks and rivers surrounded by or adjacent to urbanized areas. Based on the analysis of the thermal band of Landsat TM at May 17, 1997, the thermal mitigation effect of open spaces in the city could be summarized as follows ; Kumho river showed the largest mitigation effect in terms of the width of mitigation zone and temperature difference. Evaporation from wide water surface and evapo-transpiration from riparian grass land could bring into results. Significant mitigation effect of parks covered with forest can be observed. The temperature range of such parks were between 19.05$^{\circ}C$ and 19.44$^{\circ}C$ However, the thermal mitigation effect of Dalsung park and Apsan park was insignificant. The small size and high percentage of hard paving of the former and the relative low density of the residential areas adjacent to the latter could be the main reason. In conclusion, the thermal mitigation effect in urban ope spaces could be detectedby the employment of thermal band data of Landsat TM and GIS buffering technique.
광폭의 도로에서는 횡단거리가 길어 보행자의 녹색시간이 길게 할당된다. 부도로의 교통량이 적을 때에도 보행자의 최소녹색시간으로 인해 일정시간 이상의 녹색신호시간을 보장해 주어야 하기 때문에 신호주기가 길어지고 주도로의 g/C 비율이 감소하게 되어 교차로 전체의 지체가 증가되는 문제점이 발생한다. 이 같은 문제점을 개선하기 위해 2단 횡단보도의 설치 효과를 차량 측면과 보행자 측면으로 나누어 분석하였다. 차량당 제어지체를 TRANSYT-7F와 VISSIM을 활용하여 산출하였고 그 결과 2단 횡단보도의 차량당 제어지체가 일반 횡단보도에 비해 최소 14.9%에서 최대 85.6% 감소하는 것으로 나타났다. 보행자 측면에서는 해석적 방법으로 두 횡단보도의 보행자 평균 횡단시간을 비교하였으며, 또한 VISSIM을 통한 평균 보행자지체를 산출하여 비교분석하였다. 해석적 방법으로 보행자 평균 횡단시간을 산출한 결과, 두 횡단보도의 큰 차이는 없는 것으로 분석되었다. VISSIM을 활용하여 보행자 지체시간을 산출한 결과, 일반 횡단보도에 비해 2단 횡단보도의 평균 보행자 지체가 13.4%~22.3%까지 감소하는 것으로 분석되었다. 따라서 교통 및 기하조건이 연구결과와 유사한 경우에는 일반 횡단보도에 비해 2단 횡단보도가 차량 및 보행자측면에서 효과적으로 사용될 수 있을 것으로 사료된다.
시뮬레이션 프로그램을 이용하여 철골 유리온실에서 피복재의 투과율 변화에 따른 필요환기량을 산정하고, 측창의 설치 여부와 온실 폭이 자연환기 성능에 미치는 영향을 분석한 결과를 요약하면 다음과 같다. 여름철에 온실 내부의 온도를 적정수준으로 유지하기 위한 필요환기량은 외기온이 높고 투과율이 높을수록 증가하였다. 투과율 90%(무차광) 유리온실에서 온실 내부의 온도를 35℃로 유지하기 위한 필요환기량은 외기온이 32℃일 때가 외기온이 20℃일 때의 5.5배 정도로 나타나, 외기온이 필요 환기량에 큰 영향을 미침을 알 수 있었다. 또한, 투과율 50%(40% 차광)인 온실의 필요환기량은 투과율 90%인 온실에 비하여 절반 정도로 나타 나, 차광이 고온기에 온실 내부 온도의 과다상승을 방지하는 효과가 크다는 사실을 확인할 수 있었다. 그리고 측창과 천창의 총면적이 일정할 때, 환기 성능이 최대인 경우는 측창과 천창의 면적이 동일할 때이고, 이는 측창이 없고 천창만 설치한 경우에 비하여 약 3배 정도로 크기 때문에, 여름철에 온실의 자연환기 성능을 향상 시키기 위해서는 반드시 측창을 설치하여야 하는 것을 확인할 수 있었다. 그리고 벤로형과 와이드스팬 온실에서 천창만 있고 측창이 없는 경우에는 스팬 수에 상관없이 환기율이 일정하게 나타났고, 천창과 측창이 있는 경우에는 스팬수가 증가할수록 환기율이 점차 감소하여 결국 측창이 없는 경우와 거의 동일하게 나타났다. 또한, 천창과 측창을 설치한 경우의 환기율이 천창만 설치한 경우의 환기율의 2배 이상 되도록 하기 위해서는 벤로형인 경우 12연동(폭 38.4m) 이하, 와이드스팬형인 경우 5연동(폭 64m) 이하가 되어야 한다. 따라서 온실 폭이 그 이상 될 경우에는 측창을 통한 환기효과를 크게 기대하기 어려움을 알 수 있다.
The purpose of this study is to investigate the strength and ductility of reinforced concrete columns subject to axial load experimentally for several variables of reinforcements and propose foundational research date for reinforcement design of column. In the test a total of eleven specimens, which are all $20{\times}20{\times}60cm$ in size and differently reinforced with steel plate, has been used. The main variables of reinforcement considered in the test are the width of steel plate, the thickness of steel plate. Based on the test results, the effect of the main variables on the strength and ductility of reinforced concrete column have been scrutinized. The strength of reinforced concrete columns are that C-2 series on strengthed with 2mm thickness steel plate are smaller than C-4 series on strengthed with 4mm steel plate. Thick steel plate of reinforced expected utilizer than the other on strength increase and specimens to be large width steel plate of each system are the utiltzer on strength increase. Ductility of C-0 specimen is 1.60, C-2 series is 2.38, C-4 series 2.63 Compare efficiency of ductility increase with each specimens, in narrow width condition (2cm, 4cm) C-2 series is more efficiency, in wide width condition (8cm, 10cm) C-4 series is more efficiency.
본 연구에서는 De Marchi 유량계수 개념을 이용하여 상대적으로 폭이 넓은 개수로에서 광정횡월류위어 유량계수에 대한 위어 상류단 프루드수($Fr_1$), 위어 높이(h), 위어 길이(L), 위어 폭(W), 본류 폭(B)의 영향 및 예언횡월류위어의 유량계수와 광정횡월류위어의 유량계수의 상관성을 실험적으로 확인하였다. 분석 결과 폭이 넓은 개수로 흐름 조건에서는 본류 흐름 조건의 영향이 약화되고 위어 자체의 기하학적 형상에 의한 영향이 강화되기 때문에 예연횡월류위어와 광정횡월류위어 유량계수의 상호연관성이 상대적으로 약화되는 것으로 나타났으며, 차원해석을 통하여 $Fr_1$, h/$y_1$, L/B, W/($y_1-h$) 등 4개의 변수가 영향이 큰 것을 확인하였다. 그리고 실험 결과를 바탕으로 회귀분석을 통하여 새로운 광정횡월류위어 유량계수 산정식을 제안하였다.
WCDMA용 SAW 필터를 제작하기 위하여 mathematica package를 이용한 모의 실험기를 개발하였으며, 전극재료로는 Al-Cu를 사용하였다. 모의실험한 자료를 바탕으로 전극에서 발생하는 ultimate rejection을 줄이기 위해 SFIT형태의 필터를 설계 및 제작하였다. 회절에 의한 현상을 최소화하기 위해 필터의 입력단은 block weighted IDT 형태로, 출력단은 withdrawal weighted IDT형태로 구성하였다. Langasite 기판위에 형성시킨 입 출력 빗살무늬 변환기 전극 수는 50쌍, 두께와 폭은 5000$\AA$와 1λ4(((equation omitted) 3.6$\mu\textrm{m}$)로 하였으며, IDT 전극 폭과 전극간격 은 각각 1λ/16와 1λ/8로 하였다. 제작한 SAW 필터의 특성은 중심주파수는 190MHz, 통과대역은 4MHz이며 저지대역은 -60dB이하로 측정되었다.
본 연구의 목적은 De Marchi 유량계수 $C_M$의 개념을 이용하여 상대적으로 폭이 넓은 개수로에서 실험적으로 상류 조건의 직사각형 예연횡월류위어 유량계수에 대한 상류 프루드수, 위어 높이, 위어 길이, 본수로 폭의 영향을 확인하는 것이다. 수로 실험과 차원해석을 통하여 도출된 네 가지 중요 영향 변수, $Fr_1$, $h/y_1$, L/B, $L/y_1$의 영향을 관찰하고, 실험 결과를 바탕으로 새로운 예연횡월류위어 유량계수 산정식을 제안하였다. 분석 결과 폭이 넓은 개수로에서 예연횡월류위어 유량계수에 대한 $Fr_1$의 영향은 감소하는 것을 확인하였으며, $h/y_1$, L/B, $L/y_1$의 중요도가 증가하는 것으로 나타났다. 또한 기존 연구자들의 실험 자료와 본 연구의 실험 자료를 비교 분석하여 기존 예연횡월류위어 유량계수 산정식의 적용성을 개선하였다.
A study of counter-current two-phase flow in narrow rectangular channels has been performed. Two-phase flow regimes were experimentally investigated in a 760mm long and 100mm wide test section with 2.0 and 5.0mm gap widths. The resulting flow regime maps were compared with the existing transition criteria. The experimental data and the transition criteria of the models showed relatively good agreement. However, the discrepancies between the experimental data and the model predictions of the flow regime transition become pronounced as the gap width increased. As the gap width increased the transition gas superficial velocities increased. The critical void fraction for the bubbly-to-slug transition was observed to be about 0.25. The two-phase distribution parameter for the slug flow was larger for the narrower channel. The uncertainties in the distribution parameter could lead to a disagreement in slug-to-churn transition between the experimental findings and the transition criteria. For the transition from churn to annular flow the effect of liquid superficial velocity was found to be insignificant.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.