• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.322-326
• /
• 2016

The distribution of floodplain vegetation is mainly affected by hydrological and hydraulic processes. In this study, we investigated changes in the vegetation distribution due to flood discharge alteration, and the relationship between the vegetation types and the flood frequency during the last ten-year period in the Cheongmi-cheon Stream. Flood discharge of the Cheongmi-cheon Stream tended to decrease from 2006 to 2016. It has greatly decreased to less than $160m^3/s$ since 2013. This resulted in the settlement of Phragmites japonica to the wide sand bar at the Cheongmi-cheon Stream, even though it had sparse vegetation before 2013. The sand bar was fully covered with P. japonica in 2016. Vegetation communities in the floodplain were classified by dominant species, i.e. the annual-hygrophytic, the perennial hygrophytic and the mesophytic communities. Analysis of the relationship between the vegetation communities and the flood frequency shows the annual hygrophytes, perennial hygrophytes and the mesophytes communities distributed in the range of under 1 year, 1-10 year and over 7 year flood inundation area, respectively. In conclusion, distribution of the floodplain vegetation is closely related with the flood discharge and frequency in the Cheongmi-cheon Stream.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.307-314
• /
• 2011

A new predistortion technique for dynamic spectrum allocation systems such as cognitive radio (CR) is proposed. The system model considered in this paper occupies a small band at a time, but the center frequency can be changed in the wide range of frequency. In this scenario. the front-end filter may not eliminate the harmonics of the power amplifier (PA) output. The proposed PD reduces the spectral regrowth of the fundamental signal at the carrier frequency (${\omega}_0$) and removes the harmonics ($2{\omega}_0$, $3{\omega}_0$, ...) at the same time. The proposed PD structure is composed of multiple predistorters (PDs) centered at integer multiples of ${\omega}_0$. The PD at ${\omega}_0$ is for removing spectral regrowth of the fundamental signal, and the others are for harmonic reduction. In the proposed PD structure, parameters of PDs are found jointly. Simulation results show that the spectral regrowth can be reduced by 20dB, and the 2nd and 3rd harmonics can be reduced down to -70dB from the power of the fundamental signal.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.174-178
• /
• 2002

Ac magnetic field was changed in the vicinity of a flaw because of the distribution of eddy current within a conductor, when the magnetic field was applied to a conductor having a flaw. The flaw detection was performed by using Co-based amorphous wire sensor head. The wire has almost 0 magneto-striction and high permeability. An comparative uniform magnetic field was applied to a 1㎜ thick copper plate and a 25㎛ thick aluminum sheet conductor using spiral typed coil. The size of the coil has 40㎜$\times$40㎜ outer width and 8㎜$\times$8㎜ inner width. The copper plate and the aluminum sheet has 0.5㎜ and 0.1㎜ wide gap, respectively. The frequency range of applied field was 100㎑∼600㎑. The induced voltage difference of 2.5㎷ was obtained in the maximum voltage and minimum one measured across the gap of the 1mm thick conductor. In the case of aluminum sheet, 0.4㎷ was obtained. From this results, the effectiveness of Co-based amorphous wire was confirmed in the ECT technique.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.355-364
• /
• 2010

Filiform hairs that respond to movements of the surrounding medium are the mechanoreceptors commonly found in arthropods and vertebrates. In these creatures, the filiform hairs function as a sensory system for raider detection. Parametric analyses of the motion response of filiform hairs are conducted by using a mathematical model of an artificial flow sensor to understand the possible operating ranges of a microfabricated device. It is found that the length and diameter of the sensory hair are the major parameters that determine the mechanical sensitivities and responses in a mean flow with an oscillating component. By changing the hair length, the angular displacement, velocity, and acceleration could be detected in a wide range of frequencies. Although the torques due to drag and virtual mass are very small, they are also very influential factors on the hair motion. The resonance frequency of the hair decreases as the length and diameter of the hair increase.

• The Plant Pathology Journal
• /
• v.21 no.2
• /
• pp.158-163
• /
• 2005

Virus-induced gene silencing (VIGS) is a recently developed gene transcript suppression technique for characterizing the function of plant genes. However, efficient VIGS has only been studied in a few plant species. In order to extend the application of VIGS, we examined whether a VIGS vector based on TRV would produce recognizable phenotypes in soybean. Here, we report that VIGS using the Tobacco rattle virus (TRV) viral vector can be used in several soybean cultivars employing various agro-inoculation methods including leaf infiltration, spray inoculation, and agrodrench. cDNA fragments of the soybean phytoene desaturase(PDS) was inserted into TRV RNA-2 vector. By agrodrench, we successfully silenced the expression of PDS encoding gene in soybean. The silenced phenotype of PDS was invariably obvious 3 weeks after inoculation with the TRV-based vector. Real-time RT-PCR analyses showed that the endogenous level of GmPDS transcripts was dramatically reduced in the silenced leaf tissues. These observations confirm that the silenced phenotype is closely correlated with the pattern of tissue expression. The TRV-based VIGS using agrodrench can be applied to functional genomics in a soybean plants to study genes involved in a wide range of biological processes. To our knowledge, this is the first high frequency VIGS method in soybean plants.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.18 no.2
• /
• pp.168-176
• /
• 2011

Purpose: The purpose of this study was to identify differences between intake and output balance and body weight changes and to identify factors related to differences in critically ill patients. Methods: The participants for this descriptive correlational study were 65 medical surgical ICU patients. The data were collected from patient medical records. Results: Mean age of the patients was 63.80 years (${\pm}15.21$). Body weight changes for 48 hours averaged 281.54g (${\pm}2210.48$). I&O balance for 48 hours corrected for insensible loss averaged 398.1ml. Differences ranged from 45mL to 7,535mL. In the distribution of absolute difference between body weight change and intake and output balance, only 40% of the patients were within less than 1,000 mL. Factors relating to accurate measure of intake and output were ventilation methods, respiration patterns, and edema status. Conclusion: Although mean values of weight change and I&O balance for all patients were very close, the range of differences was very wide indicating that, for many patients, intake and output is not an appropriate indicator of body fluid balance. Therefore, because of the frequency fever and/or hyperventilation, nurses need to use caution when using intake and output balance only to estimate current body fluid status for critically ill patients.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.411-424
• /
• 2017

An all-digital delay-locked loop (DLL) for a mobile memory interface, which runs at 0.11-2.5 GHz with a phase-shift capability of $180^{\circ}$, has two internal DLLs: a global DLL which uses a time-to-digital converter to assist fast locking, and shuts down after locking to save power; and a local DLL which uses a phase detector with an adaptive phase sampling window (WPD) to reduce jitter accumulation. The WPD in the local DLL adjusts the width of its sampling window adaptively to control the loop bandwidth, thus reducing jitter induced by UP/DN dithering, input clock jitter, and supply/ground noise. Implemented in a 65 nm CMOS process, the DLL operates over 0.11-2.5 GHz. It locks within 6 clock cycles at 0.11 GHz, and within 17 clock cycles at 2.5 GHz. At 2.5 GHz, the integrated jitter is $954fs_{rms}$, and the long-term jitter is $2.33ps_{rms}/23.10ps_{pp}$. The ratio of the RMS jitter at the output to that at the input is about 1.17 at 2.5 GHz, when the sampling window of the WPD is being adjusted adaptively. The DLL consumes 1.77 mW/GHz and occupies $0.075mm^2$.

• Journal of the Korean Society of Costume
• /
• v.67 no.3
• /
• pp.1-14
• /
• 2017

Cycling has become a popular leisure activity, and many cycling enthusiasts have used cycling clothes as a form of expression, which often comes in wide range of colors. The study shows the importance of color in cycling clothing to meet the emotional needs of consumers. Furthermore, this study aims to provide comparative analysis between color of domestic and overseas cycling clothing brands, and color preference of Korean consumers in order to provide data, which can be used in satisfying consumers' needs for personal expression and emotional demands. Thus, the study expects to identify consumers' satisfaction for cycling clothing. The consumers were categorized by the frequency of cycling and their interest in fashion, and the following categories were made:potential consumers, casual cyclists with low fashion involvement, casual cyclists with high fashion involvement and frequent cyclists with high fashion involvement. Consumers preferred dark colors for their cycling clothing including jacket, top and pants, while 'frequent cyclists with high fashion involvement' preferred more diverse colors and tones. In the cycling clothing market, white and black were major colors, while red, orange and blue were major colors of chromatic color. In terms of shade, dark shade dominated the market. Comparing between preferred color and preferred product color, black was preferred for both, but no other colors showed such tendency. This study is based on empirical analysis and verification of color, which is the emotional element appealing to specific and segmented sports-apparel market. The study revealed that the data could be applicable to the design of future products.

• Journal of Acupuncture Research
• /
• v.19 no.4
• /
• pp.167-182
• /
• 2002

This experiment was designed to investigate the effects of electroacupuncture (EA) on chronic pains and factors that affected EA effects. The responses of wide dynamic range (WDR) cells to electrical stimulation of $A{\delta}$ & C afferent fibers were used as an index of pain in rats with chronic pains induced by intraplantar injection of complete Freund's adjuvant or peripheral nerve injury. In rats with chronic pains, low (2Hz) and high (100Hz) frequency EA stimulation applied to zusanli caused the inhibition of WDR cell responses in about 60% of rats and the inhibitory actions were dependent on the stimulus strength. EA stimulation also induced an excitation of WDR cell responses in 23.9% of rats and no effect in 15.8% of rats. However, it seemed that in normal rats compared to the rat with chronic pains, the incidence of which EA stimulation caused the excitation or no effect was high. Reversible spinalization almost completely blocked EA-induced inhibitory or excitatory effects. EA stimulation more frequently induced the excitation of WDR cell responses in lightly anesthetized (0.6%) rats and the enhanced responses of WDR cells were inhibited by EA stimulation in the rat anesthetized with 1.5% enflurane. These experimental findings suggest that in rats with chronic pain, EA stimulation inhibited WDR cell responses to slow $A{\delta}$ and C fiber stimulation and EA-induced inhibitory action was under the control of descending inhibitory system and degree of anesthesia.

• Smart Structures and Systems
• /
• v.16 no.4
• /
• pp.579-591
• /
• 2015

This paper investigates a magnetoelectric (ME) vibration energy harvester that can scavenge energy in arbitrary directions in a plane as well as wide working bandwidth. In this harvester, a circular cross-section cantilever rod is adopted to extract the external vibration energy due to the capability of it's free end oscillating in arbitrary in-plane directions. And permanent magnets are fixed to the free end of the cantilever rod, causing it to experience a non-linear force as it moves with respect to stationary ME transducers and magnets. The magnetically coupled cantilever rod exhibits a nonlinear and two-mode motion, and responds to vibration over a much broader frequency range than a standard cantilever. The effects of the magnetic field distribution and the magnetic force on the harvester's voltage response are investigated with the aim to obtain the optimal vibration energy harvesting performances. A prototype harvester was fabricated and experimentally tested, and the experimental results verified that the harvester can extract energy from arbitrary in-plane directions, and had maximum bandwidth of 5.5 Hz, and output power of 0.13 mW at an acceleration of 0.6 g (with $g=9.8ms^{-2}$).