• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1434-1439
• /
• 2004

CFRP composite materials have wide application in structure materials of airplane, ships, and aero space vehicles because of their high strength and stiffness. This paper is to study the effects of curvature and orientation angle on the penetration characteristics of CFRP laminate shell. They are staked with 8 Ply specimens [0$_2$/90$_2$]$_{s}$, [0/90$_2$/0]$_{s}$ and the stacked of outer plates degree with 12 Ply specimens [0$_3$/90$_3$]$_{s}$, [0$_2$/90$_2$/0]$_{s}$ and [90$_3$/0$_3$], [90$_2$/0$_2$/90]S. They are manufactured to varied curvature radius (R=100,150,200mm and $\infty$). They are cured by heating to the appropriate harding temperature(13$0^{\circ}C$) by mean of a heater at the vaccum bag of the autoclave. Test specimens were prepared with dimensions 100mm$\times$140mm. When the specimen is subjected to transverse impact by a steel ball, the velocity of the steel ball was measured both before and after impact by determining the time for it to pass two ballistic-screen sensor located a known distance apart. In general, kinetic energy after impact-kinetic energy before impact rised in all specimens. This study observed a fracture mode inside the specimen after a penetration test using a digital camera and it examined a fracture mode and a penetration mode to stack of outer orientation angle and curvature.rvature.

• 지구물리와물리탐사
• /
• 제14권3호
• /
• pp.234-241
• /
• 2011

오일샌드는 고유가로 인하여 최근 활발하게 탐사 및 개발이 진행되고 있다. 오일샌드는 일반적으로 박층으로 존재하기 때문에 이의 탐지를 위해서는 지표 탄성파탐사보다는 시추공 주변의 고해상도 영상화가 장점인 다성분 VSP 탐사가 효과적이다. 또한 중합전 위상막 구조보정의 경우, 단방향 파동방정식을 이용하기 때문에 다성분 자료를 이용한 영상화에 효과적이다. 이 연구에서는 박층 오일샌드의 영상화를 위하여, 다성분 역VSP 탐사자료를 이용한 중합전 위상막 구조보정의 적용성을 고찰하였다. 중합전 위상막 구조보정에 사용할 다성분 역VSP 탐사자료의 전처리 과정으로 입사각과 회전변환을 이용한 파 분리 방법을 제안하고, 이를 합성탄성파탐사자료를 통하여 검증한 결과 파 분리가 효과적으로 되는 것을 확인하였다. 또한 분리된 P파와 PS파 자료를 이용하여 구조보정을 실시하였을 시, PS파 구조보정 결과가 P파 구조보정 결과보다 넓은 반사면의 영상화가 가능하고 고해상도의 영상을 획득하였다. 그리고 캐나다 오일샌드 매장지역을 모사한 합성탄성파탐사자료를 생성하고 이를 영상화 한 결과, P파 구조보정 결과보다 PS파를 이용한 구조보정 결과가 박층 오일샌드의 상 하부 경계면을 정확하게 영상화하였다.

• Journal of Power Electronics
• /
• 제7권4호
• /
• pp.278-285
• /
• 2007

Recently, plasma display panels (PDP) have become the most promising candidate in the market for large screen size flat panel displays. PDPs have many merits such as a fast display response time and wide viewing angle. However, there are still concerns about high cost because they require complex driving circuits composed of high power switching devices to generate various voltage waveforms for three operational modes of reset, scan, and sustain. Conventional PDP driving circuits use path switches for voltage separation and a scan switch to offer a scan voltage for reset and scan operations, respectively. In addition, there exist reset switches to initialize PDPs by regulating the wall charge conditions with ramp shaped pulses, which means the necessity of specific power devices for the reset operation. Because power for the plasma discharge accompanied by a large current is transferred to a panel via path switches, high power rating switches are used for path switches. Therefore, this paper proposes a novel low-cost PDP driving scheme achieved by not only eliminating path switches but also merging the function of reset switches into other switches used for sustain or scan operations. The simulated voltage waveforms of the proposed topology and experimental results implemented in a 42-inch panel to demonstrate the validity of using a new gate driver that merges the functions of power switches are presented.

• 한국항공운항학회지
• /
• 제11권1호
• /
• pp.41-55
• /
• 2003

A calibration jet system using separate blower is developed to calibrate a flow sensor effectively. Designed open circuit type mini calibration jet system, which has the dimension of $0.5m(W){\times}1.17m(H)$ is small compared with conventional calibration jet systems. The exit of nozzle has exchangeable contractions with a cross section area of $38.5cm^2$ , and a cross section area of $113.1cm^2$, respectively. The ranges of wind speed at exit of exchangeable nozzles are $7.5{\sim}42\;m/s$ and $1.8{\sim}16.5\;m/s$, respectively. The input power for the high pressure blower is 1.18kW. The turning vanes for corner was rolled flat plate parallel to the flow direction. The flow conditioning screen was located immediately downstream of the wide-angle diffuser. The honeycomb and two flow conditioning screens were located in the stagnation chamber. From the economical point of view and the simplicity of the calibration jet system set up and handling, it can be said that the developed calibration jet system is an effective calibration jet system. This system can also be used to calibrate the flow sensor with high resolution.

• 한국광학회지
• /
• 제18권6호
• /
• pp.421-425
• /
• 2007

앞뒤로 겹쳐진 편광 선택성 이중스크린을 이용하는 후면투사 방식의 3D 프로젝션 디스플레이 시스템을 개발하였다. 전면과 후면 스크린은 산란형 편광필름을 이용하며, 각 스크린은 입사하는 빛의 편광상태에 따라 해당 빛을 확산-혹은 비확산-투과시킨다. 서로 수직인 선편광의 빛을 이용하여 근경과 원경을 각각 전면스크린과 후면스크린에 투사한다. 새로운 시스템은 넓은 시야각에 대하여 선명한 고해상도 영상을 제공한다. 영상의 입체감이 뛰어나고 시청자의 눈에 단지 2D 디스플레이 시스템이 주는 정도의 피로감만 야기한다.