• Geomechanics and Engineering
• /
• 제11권1호
• /
• pp.77-94
• /
• 2016

A forked tunnel, as a special complicated underground structure, is composed of big-arch tunnel, multi-arch tunnel, neighborhood tunnels and separate tunnels according to the different distances between two separate tunnels. Due to the complicated process of design and construction, surrounding jointed rock mass stability of the big-arch tunnel which belongs to the forked tunnel during excavation is a hot issue that needs special attentions. In this paper, an elasto-plastic damage constitutive model for jointed rock mass is proposed based on the coupling method considering elasto-plastic and damage theories, and the irreversible thermodynamics theory. Based on this elasto-plastic damage constitutive model, a three dimensional elasto-plastic damage finite element code (D-FEM) is implemented using Visual Fortran language, which can numerically simulate the whole excavation process of underground project and perform the structural stability of the surrounding rock mass. Comparing with a popular commercial computer code, three dimensional fast Lagrangian analysis of continua (FLAC3D), this D-FEM has advantages in terms of rapid computing process, element grouping function and providing more material models. After that, FLAC3D and D-FEM are simultaneously used to perform the structural stability analysis of the surrounding rock mass in the forked tunnel considering three different computing schemes. The final numerical results behave almost consistent using both FLAC3D and D-FEM. But from the point of numerically obtained damage softening areas, the numerical results obtained by D-FEM more closely approach the practical behaviors of in-situ surrounding rock mass.

• 지질공학
• /
• 제20권2호
• /
• pp.155-167
• /
• 2010

사면의 안정성 분석에 결정론적인 방법이 최근까지 많이 사용되어 왔으나, 암반의 불확실성과 가변성을 고려하는 확률론적인 방법이 더욱 효과적인 것으로 알려지면서 확률론적인 방법의 사용이 점차 증가하는 추세이다. 그러나 현재까지의 방법들은 절리의 특성이나 암반의 풍화 특성 등과 같은 암반의 특성이 사면 전체에서 균질한 것으로 가정하고 있으며, 암반 사면의 파괴에 가장 결정적인 변수인 절리의 연장성을 고려하지 않은 상태에서 안전율 혹은 파괴확률을 계산하여 사면의 안정성을 분석하고 있어서 정확한 사면 안정성 분석에 한계를 보이고 있는 실정이다. 이 연구에서는 모델 사면을 설정한 후, 사면이 균질하다고 가정한 경우와 사면을 암반 및 절리의 상태에 따라 구역으로 분할한 경우의 파괴확률을 계산하여 비교하였고, 또한 위의 각각의 경우에 절리의 연장성을 변수로 고려한 파괴확률을 계산하였다. 또한 강원도 홍천군에 위치한 사면을 구역으로 분할한 후 절리의 연장성을 고려한 파괴확률을 계산하여 모델 분석의 적용성을 검증하였다.

• 한국발생생물학회지:발생과생식
• /
• 제21권4호
• /
• pp.371-378
• /
• 2017

Interferon-stimulated gene 15 (ISG15) is known to interfere with viral replication and infection by limiting the viral infection of cells. Interferon-stimulated gene 15 (ISG15) interferes with viral replication and infectivity by limiting viral infection in cells. It also plays an important role in the immune response. In this study, tissue-specific expression of ISG15 in healthy rock bream samples and spatial and temporal expression analysis of rock bream ISG15 (RbISG15) were performed following rock bream iridovirus (RSIV) infection. RbISG15 expression was significantly higher in the eye, gill, intestine, kidney, liver, muscle, spleen, and stomach, but low in the brain. There were particularly high levels of expression in the liver and muscle. RbISG15 expression was also examined in several tissues and at various times following RSIV infection. ISG15 expression increased within 3 h in the whole body and decreased at 24 h after infection. In addition, temporal expression of several tissues following RSIV infection showed a similar pattern in the muscle, kidney, and spleen, increasing at 3 h and decreasing at 72 h. These results suggest that ISG15 plays an important role in the immune response of rock bream. Overall, this study characterizes the response of RbISG15 following RSIV infection.

• 한국터널지하공간학회 논문집
• /
• 제11권2호
• /
• pp.141-150
• /
• 2009

불연속면이 발달한 암반 내에서 해저터널을 시공할 경우 절리 내의 지하수 흐름이 터널 거동에 커다란 영향을 마치므로 안정성 평가 시 수리-역학적 연계해석이 필요하다. 실무에서는 일반적으로 암반이완하중을 고려하여 터널의 콘크리트 라이닝을 설계한다. 연속체 해석 시 잠재적 이완영역을 터널 주변의 국부안전율 분포를 이용하여 수치해석에 의해 산정하는 방법이 제안된 바 있다. 그러나 절리가 발달한 암반의 경우는 절리의 거동이 터널 전제 거동에 큰 영향을 미친다. 따라서 본 연구에서는 불연속 암반 내에 터널 굴착으로 인해 발생하는 잠재적 이완영역을 산정하는 방법을 제안하고 민감도 분석 및 연속제 해석 결과와 비교를 통해 제안된 방법의 타당성을 검증하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.842-853
• /
• 2008

In the construction of dam, the key factor which decides the type of dam is security of materials resource. Because of the large scale earth work, the ability to supply the materials is essential part about economical efficiency. The research is the case study about controlling the plan to secure the material resources in the design of Buhang multipurpose dam. In case of Buhang multipurpose dam, at that time of basic design, it was planned to use a rock fill material. From the detail investigation about the river bed accumulative layer widely spread on the submerged district on the basic design, the research is accomplished to replace rock material with gravel material. After the investigation of whole reserves of gravel material, estimation of conformity as dam construction material from analysis of grain size distribution, the case study of oversea construction, and the material property comparison between rock fill material and gravel fill material, it is verified th possibility of using the gravel fill. Thereafter, the analysis of dam stability using a gravel fill material is accomplished. Finally, A gravel fill material can be used as the main construction material of CFRD, therefore the efficiency of resource recycling in the submerged area is maximized, and the established plan is more advantageous to stability, constructibility, environmentibility than the case of using a rock fill.

• 터널과지하공간
• /
• 제7권1호
• /
• pp.31-38
• /
• 1997

Residual shear strength should be taken into consideration as well as peak one when analysing stability of slopes constituted by weathered rock or overconsolidated soils since such materials could be subjected to progressive failure mechanism. When landslide of a slope is related to progressive failure phenomenon, the failure might occur even though shear strength of the slope materials does not reach their residual shear strength over the whole slip surface. Therefore, stability of the slope concerned may be overstimated or underestimated when using only its peak or residual shear srength parameters. Mechanical description for progressive failure phenomenon is given by Bjerrum(1967). In parameters. Mechanical description for progressive failure phenomenon is given by Bjerrum(1967). In this study, his theory has been extended to estimate the distance of failed zone for a plane slope and the results calculated by this extended equatio has been compared with that obtained by numerical modelling using FLAC. In addition, stress state on the slip surface has been, in detail, analysed to understand failure mechanism when a limited progressive failure occurs. Effects of mechanical and hydraulic factors on progressive failure have also been analysed.

• 수산경영론집
• /
• 제52권3호
• /
• pp.27-38
• /
• 2021

This study is aimed to figure out the productivity and variability of cage-aquaculture changes. According to the analysis, the productivity of major fish species has been increasing, except mullet. Although the regional productivity has decreased in the last two years, it has been on the rise considering as a whole. Gyeongsangnam-do showed the highest level of productivity by region. Productivity by species was also higher than other regions in the cases of rock fish, mullet and sea bream followed by productivity of Chungcheongnam-do. The production of marine cage-culture in Jeollanam-do is the second largest in Korea in value/weight while its productivity is lower than that of Chungcheongnam-do. When it comes to comparison by region, Gyeongsangnam-do shows the lowest productivity variation. And Jeollanam-do shows the second-lowest variation in productivity that is only about half of that of Chungcheongnam-do province. Thus, it is found that Jeollanam-do region has an advantage in management stability while its productivity is low. On the other hand, productivity by species was also analyzed. Gyeongsangnam-do has the highest productivity by species for rock fish, mullet and sea bream whereas rock bream productivity is the highest in Jeollanam-do. Therefore, it probably needs to reflect these results when choosing regional-focused incubation fish species.

• 헤리티지:역사와 과학
• /
• 제45권3호
• /
• pp.160-173
• /
• 2012

본 연구는 동대문운동장에서 출토된 조선시대 기와의 선후관계, 유물제작기법 및 기술적 속성을 파악하기 위하여 기와의 물리적 화학적 특성 연구를 실시하였다. 기와의 물리적 특성 연구를 위해 흡수율, 비중, 전암대자율, 시차열분석을 실시하였으며, 화학적 특성 연구를 위해 중성자 방사화분석(NAA), 미세조직관찰, X-선 회절분석(XRD) 등을 실시하였다. 기와편 22점의 중성자방사화분석 및 통계분석결과 각각 기와시료는 다른 시대에 서로 다른 제작지에서 생산된 것으로 뚜렷하게 구분되었다. 또한 희토류원소의 출토지별 평균값을 비교해 보아도 각각 서로 다른 조성의 차이를 보이는데 이는 산지가 다른 점토광물을 이용하여 제작하였다는 것을 의미한다. XRD 및 편광현미경 관찰결과 기와의 주요 성분은 석영과 장석이었으며 부분적으로 운모와 일라이트(Illite)가 나타났다. XRD 분석결과 $1000^{\circ}C$의 부근에서 소성되었을 때 나타나는 뮬라이트(mullite)광물 조성이 나타났으며, 시차열분석에서는 $900^{\circ}C$ 부근에서 완만한 발열피크가 나타났다. 이를 토대로 기와의 소성온도를 추정한 결과, 기와는 $900{\sim}1000^{\circ}C$에서 소성이 이루어진 것으로 보인다. 전암대자율 평균값으로 비교분석하였을 때 출토지별 분류는 나타나지 않았지만 문양이 파상문, 태상문, 어골문, 격자문, 횡선문인 경우 0.2~0.78(${\times}103$ SI unit)의 낮은 전암 대자율이 나타나는 특징이 있다. 전체 흡수율은 대체적으로 14%~21% 범위를 보였으며 이는 조선시대 전통기와에서 나타나는 흡수율 14~18%와 유사한 범위를 보이고 있다. 기와시료의 비중은 대체적으로 1.4~2.5g/cm3의 범위를 보여 출토지에 따른 비중 차이가 나타나지 않았다.

• 한국지반신소재학회논문집
• /
• 제12권4호
• /
• pp.45-56
• /
• 2013

최근 해상풍력발전 단지 조성은 많은 양의 에너지를 창출할 수 있어 그 기대는 점차적으로 증가하고 있다. 특히 제주도는 풍황이 우수하여 해상풍력발전 시스템 운영을 위한 최적의 대상지이기는 하나, 화산활동에 의해 형성된 지형으로 육지부와 달리 기반암인 현무암층 사이에 연약층인 화산쇄설물 및 공동이 불규칙하게 발달된 층상구조로 이루어져 있다. 즉, 해상풍력발전기 기초저면 기반암에 연약한 화산쇄설물이 존재하는 경우 풍력발전기의 주기적인 진동으로 지반의 강도가 저하됨은 물론 장기침하로 인하여 풍력발전기의 장기적인 안정성 확보가 어려울 수도 있다. 본 논문에서는 제주도의 3개 지역에 대한 지표지질조사와 실내실험을 통해 도출된 설계정수를 파악한 후, 수치해석을 통하여 층상구조로 이루어진 연약지층에 모노파일 설치시 연직변위와 응력분포 결과를 도출하였다.

• 터널과지하공간
• /
• 제7권3호
• /
• pp.191-201
• /
• 1997

Geological and geotechnical surveys, in general, should precede the excavation to ensure the safety of the tunnel and should be followed up according to the various geological condition during the excavation. However actually the standard support patterns which were decided during the design step used be insisted for the whole excavation steps in spite of the various geological conditions. OO tunnel was excavated with NATM and a support pattern type-V in weak rocks. When the tunnel was excavated up to 25m long, the severe displacement was generated in the portal area and the shotcrete was damaged to make the cracks and the tunnel face was totally collapsed. It might happen owing to the one-day heavy rain, but the exact reason for that accident should be found out and the new optimal support patternt needed. Consequently three dimensional numerical analysis was applied for the evaluation of the cause of the tunnel collapse instead of two dimensional analysis, because three dimensional analysis can show better the real field phenomenon than two dimensional analysis in which the load distribution methods are adopted for the tunnel excavation. We could simulate the actual situations with three dimensional finite difference code and propose the new optimal support patterns.