• 한국식품저장유통학회지
• /
• 제11권2호
• /
• pp.170-174
• /
• 2004

Fresh-cut 멜론의 연화 억제를 위해 열처리를 행하였으며 그에 따른 저장 중 품질 특성과 texture를 조사하였다. 직접적인 열처리에 의한 과실의 품질 열하를 방지하기 위하여 전과(全果, whole fruit)를 저온(5$0^{\circ}C$)에서 열처리하고 저온(5$^{\circ}C$)에서 24시간 저장한 후, 멜론 cylinder를 가공하였다. 저장중의 포장 내 가스 조성의 변화를 통한 호흡특성, 색도 변화, pH, 가용성 고형분 함량 등의 품질 특성 및 texture를 측정하였다. 열처리한 멜론 cylinder의 호흡 특성은 저장 기간이 증가함에 따라 포장 내 산소 함량은 감소하고 이산화탄소 함량은 증가하였다. 특히 무처리구에 비하여 열처리한 멜론 cylinder의 포장내 산소 소비량 및 이산화탄소 발생량이 크게 나타났다. 전과상태에서 저온(5$0^{\circ}C$) 열처리는 멜론 cylinder의 경도 유지에 크게 영향을 주었으며 저장 6일의 경도에서 열처리 시간에 관계없이 무처리구에 비하여 경도가 크게 나타났다. 특히 5$0^{\circ}C$에서 20분 열처리한 구의 경도가 가장 큰 값을 나타냈다. 열처리 시간에 따른 색도의 차이는 미비하였으나 무처리구에 비하여 색도 변화 정도가 작게 나타났으며 특히 모든 열처리구의 L-value와 coma value가 대조구에 비해 높게 나타났다. 또한 5$0^{\circ}C$에서 20분 열처리 하여 가공한 멜론 cylinder의 pH와 가용성 고형분 함량이 저장 기간의 경과에도 유지되었으며 품질 변화가 가장 작게 나타났다.

• 한국산림과학회지
• /
• 제102권2호
• /
• pp.229-238
• /
• 2013

효율적인 임목수확작업 기술의 보급과 임목수확작업시스템을 구축하기 위해 타워야더 및 스윙야더 등에 의한 전목집재작업시스템과 굴삭기 그래플 등에 의한 단목집재작업시스템의 작업비용을 비교 분석하였다. 전목집재 작업시스템에서 작업비용을 산정한 결과, 체인톱에 의한 벌목작업비용이 2,099원/$m^3$, 타워야더에 의한 전목집재작업비용이 28,286원/$m^3$, 스윙야더에 의한 전목집재작업비용이 18,265원/$m^3$, 굴삭기 그래플 및 체인톱에 의한 조재작업비용이 18,939원/$m^3$, 바퀴식 미니포워더에 의한 소운재 및 집적 작업비용이 20,484원/$m^3$, 굴삭기 그래플 및 소형 운재차에 의한 소운재 및 집적 작업비용이 12,701원/$m^3$으로 나타났다. 또한, 단목집재작업시스템에서 작업비용을 산정한 결과, 체인톱에 의한 벌목 및 조재 작업비용이 10,160원/$m^3$, 굴삭기 그래플에 의한 단목집재작업비용이 7,567원/$m^3$, 굴삭기 그래플에 의한 지엽수집작업비용이 6,982원/$m^3$, 굴삭기 그래플에 의한 작업로개설비용이 3,040원/$m^3$, 바퀴식 미니포워더에 의한 소운재 및 집적 작업비용이 20,484원/$m^3$, 굴삭기 그래플 및 소형 운재차에 의한 소운재 및 집적작업비용이 12,701원/$m^3$으로 나타났다.

• Clinics in Shoulder and Elbow
• /
• 제21권2호
• /
• pp.67-74
• /
• 2018

Background: Fatty degeneration of rotator cuff is a well-known predictor of postoperative outcome. The purpose of this study was to evaluate the clinical features of rotator cuff tears involving subscapularis, and investigate whether fatty degeneration quantified from only the upper subscapularis correlates better with clinical outcomes than quantified from the whole subscapularis. Methods: We retrospectively analyzed 315 consecutive patients who underwent arthroscopic repair for rotator cuff tears involving subscapularis with a minimum follow-up of 1 year. Preoperative and postoperative visual analogue score for pain, range of motion and functional scores were assessed. Integrity of the repaired tendon was assessed at the 1-year follow-up with either magnetic resonance imaging or ultrasonography. Results: The mean Goutallier grade of whole cross-section was significantly lower than that of upper cross-section (1.59 vs. 1.71, p<0.05), but significantly higher than that of lower cross-section (1.59 vs. 1.01, p<0.05). In analysis of 37 re-tears, the occupancy of severe fatty degeneration in upper cross-section was 86.5%, which was significantly higher than that seen in whole cross-section (56.8%, p<0.05). We calculated the cut-off tear size for prediction of re-tears as 19.0 mm for retraction and 11.0 mm for superior-inferior. The cut-off Goutallier grade was 2.5 for both whole and upper cross-sections, but area under the curve was greater in the upper cross-section than the whole (0.911 vs. 0.807). Conclusions: As fatty degeneration of upper subscapularis demonstrated a more distinct spectrum than whole subscapularis, we suggest that measuring fatty degeneration of upper subscapularis can be a more useful method to predict clinical prognosis.

• 한국컴퓨터산업학회논문지
• /
• 제2권3호
• /
• pp.389-396
• /
• 2001

압축된 동영상에서 인덱싱을 위한 장면전환 검출기법에서 기존의 방법들은 실험에 의한 고정 임계값을 설정하여 임계값 보다 크면 장면전환이라고 판단해왔다. 기존의 고정 임계값을 적용시켰을 때는 플래쉬나 카메라 움직임 등에 의한 오검출이 많은 문제점이 있었다. 본 논문에서는 장면 전환 검출을 위한 임계값을 동영상 특성 중, 장면전환점간격을 이용하여 임계값을 동적으로 변화시키는 방법이며, 고정 임계값을 사용하는 경우보다 오검출을 줄이는 향상된 장면전환 검출기법을 제안한다. 실험에서는 동영상 특성을 통계적으로 분석하여, 기존의 고정임계값과 제안한 동적임계값을 사용한 결과 값을 비교분석 하였다. 제안한 방법은 기존의 방법보다 30%정도 오검출이 줄었다.

• 한국습지학회지
• /
• 제2권2호
• /
• pp.109-116
• /
• 2000

The equipment of a landfill need whole cut off facilities so that leachate generated from the landfill primarily do not leak to the ocean. Also, the whole collected leachate need a consecutive clarification treatment to discharge. A method is considered the best among the three alternatives. The merits of this method are as follows; have no secondary pollution. can cut down the expense of treatment, have good effects on preventing external leakage, don't need a leachate well, reliable quality control and easy post management. The weaknesses of this method are as follows; need a thorough survey about underground water and quality of the soil, need a special process to use as the land.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.208-211
• /
• 2009

To reduce the peak demand the promotion of gas cooling(absorption chillers and GHPs) is required. In this study the effect of electric power peak-cut has been analyzed using two methods. One is based on monthly LNG consumption data and the other is using the gas cooling capacity installed. Both methods agreed well with each other within the uncertainty of 20%. It was found that the gas cooling had the peak cut effect of 1,500-2,000 MW for recent 5 years (2003 - 2007). The ratio of gas cooling to the whole cooling demand was 12-15%, which is needed to be increased.

• 대한조선학회지
• /
• 제18권1호
• /
• pp.9-18
• /
• 1981

The wave-pattern analysis has been one of important research tools in the towing tank, and applied for hull form design. The longitudinal-cut method of Newman and Sharma is adopted in KRIS deep towing tank. Instrumentations and data acquisition systems are developed for that. Local effects and truncation effects are estimated by using calculated wave patterns of simple source distributions. Wigley model of 2m is used to check the accuracy of the whole system. Cut positions and truncation points are changed to investigate characteristics of the wave-pattern analysis. Coefficients of wave-pattern resistance are low-estimated in comparison with those of Maruo and Ikehata. The general quality of the system is very good, but some more efforts to increase the accuracy are required. Two full-form models(one basic form, the other with bulbous bow) are tested to show high application-possibilities of the wave-pattern analysis for the hull form design.

• 복식문화연구
• /
• 제20권1호
• /
• pp.36-48
• /
• 2012

This study intends to provide fundamental data to develop creative high-value designs, proving that the cut-out technique, a decorative element of fashion design, can be used to express various visual effects. The author performed a literature review of such publications as Gap Press, Fashion News, and Mode & Mode from 2001S/S to 2010S/S, referring to Internet data to empirically analyze the cut-out technique in contemporary fashion. The study found that the cut-out design is effective overall, but is best suited for one-piece designs and for partial rather than whole items of clothing. The basic motif of the cut-out is a geometrical pattern based on a line, a tear, or is shapeless. The cut-out design is mostly shown as an overall pattern or as a symmetrical shape. Analysis shows that the characteristics of the contemporary fashion utilizing the cut-out technique are as follow: First, the cut-out technique exposes the curves of a woman's body in a direct or indirect way, thereby emphasizing her sexuality and maximizing the value of female beauty. Second, through the cut-out technique, we can highlight the various types of space formed by the technique and repeated patterns; we may also elaborate on single-patterned laser-cut designs, which will show that the particular surface effect of the material can strongly impact the attractiveness of the design through emphasis and decoration. Third, damaging or destroying clothes on purpose, showing surprising concepts through optical illusions, and expressing humor by ignoring existing clothing styles show our willingness to escape from traditional or obvious design ideas, as well as demonstrating individuality and playfulness.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.125-139
• /
• 2020

The fashion industry that perceived the severity of environmental pollution, has sought various methods of sustainable fashion. However, most of the businesses paid attention to the development of materials using industrial waste, or vegan material. Thus, this study aims to present the methods for improvement in creativity for inversely developing the design from patterns and present new approaches by applying the contrarian development of proto to class under the limited condition of material concerning general design, selection of material, and production of sample. In the case of three student teams enrolled in the first semester of the second year, the fabric and used clothing donated by industry were used as material. The whole cut for cutting a single fabric in connected state, and Zero Wastes Design within a rectangular frame of fabric, upcycling of used clothes, and cutting out of Geometric Form are suggested. The team(A) produced a zero-wastes coat and whole-cut Pancho that could be variously represented. The team(B) produced two kinds of asymmetric dress by utilizing used check-patterned shirts through upcycling. The team(C) utilized the fabric in geometric forms such as rectangle, trapezoid, and atypical figure by drawing design within donated fabrics. The items were a dress, blouse, and skirt. Consequently, an opportunity for both academia and industry to present more concrete methods for sustainable fashion and deeply perceive the sustainable fashion is presented along with novel methods for creation by carrying out the composition of pattern and design at the same time.

• 한국초지조사료학회지
• /
• 제41권3호
• /
• pp.155-161
• /
• 2021

This study was conducted to estimate the effect of different cutting lengths on fermentation characteristics and aerobic stability of whole crop rice (WCR) silage. The WCR was harvested at the yellow ripe stage (43.7%, DM), and then cut at 5 (R05), 10 (R10), and 20 cm (R20) of the theoretical length of cut with no cut WCR (R60). Each forage was ensiled into 20 L mini bucket silo (5 kg) for 150 days in quadruplicates. The cutting lengths were not affected the chemical compositions of WCR silage (p > 0.05). The pH (p < 0.001) and concentration of ammonia-N (p = 0.022) in WCR silage were increased linearly with the increase of cutting length. The concentration of lactate had quadratic effect (p = 0.007), which was highest in R20 silage (p < 0.05). The concentration of acetate was increased linearly (p = 0.014), but the concentration of butyrate was decreased linearly (p = 0.033). The lactic acid bacteria count was decreased linearly (p = 0.017), and yeast count had quadratic effect (p = 0.009), which was the highest in R20 silage (p < 0.05). Aerobic stability had strong quadratic effect (p < 0.001), which was the highest in R20 silage (p < 0.05). In conclusion, R60 silage had highest pH by a linear increase of ammonia-N concentration and led to low aerobic stability. While R20 silage had the lowest pH by high lactate concentration and led to high aerobic stability.