• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.242-248
• /
• 2005

There was no useful milling standard to produce high quality milled rice efficiently and adequately in Rice Processing Complex. Therefore, the whiteness of milled rice produced Rice Processing Complexes were different according to Rice Processing Complexes and milling periods at the same Rice Processing Complex. This research was carried out to contribute the production and distribution of high quality milled rice through determination of whiteness condition of milled rice as a milling stndard based on degree of bran removal using New $May-Gr\ddot{u}wald$ reagent dyeing method and taste of cooked rice. The optimum whiteness value of milled rice for efficient milling in Rice Processing Complex was found to be from 40 to 41, while the degree of milling was from $8.9\%\;to\;9.2\%.$ At this whiteness condition, the first derivative of whiteness value according to degree of milling was higher than the average value from brown rice to well milled rice, and the broken kernel ratio was from $3.0\%\;to\;3.4\%.$ This whiteness condition ($40\~41$) could be considered as a milling condition in Rice Processing Complex.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.284-290
• /
• 2017

The glyoxal has been used as formaldehyde free DP(durable press) agents in wrinkle free treatment for cotton fabrics. However, the yellowing problem is a disadvantage of DP finishing process for cotton fabrics with glyoxal. In order to improve the whiteness, it was investigated that the effect of coreactant and treatment method with various whitening additives such as STB(sodium tetraborate, $Na_2B_4O_7$), SPB(sodium perborate, $NaBO_3$), SC(sodium chlorite, $NaClO_2$) and SPC(sodium percarbonate, $Na_2CO_3{\cdot}1.5$ $H_2O_2$). The increasing the concentration of whitening additives(STB, SPB, SC and SPC), the whiteness and the strength retention ratio of cotton fabrics were increased but the wrinkle recovery angles were decreased in one bath method. It was not suitable to improve whiteness because the whiteness value is about 60. In the case of SC used two bath method, the whiteness is near 70, which is similar to untreated fabrics, without decreasing of WRA and strength.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.141-145
• /
• 2005

To investigate the relationship between the milling degree and color of milled rice, an empirical whiteness model was developed according to the milling degree from $0\%\;to\;20\%$ using paddy of three different varieties of Chuchung, Nampyong and Odae. The values of determination coefficient and the root mean square error between measured and predicted whiteness were 0.990, 0.877, respectively, and the whiteness model was proved to be quite applicable. The relationships between whiteness values and color factors in several color systems were tested to select useful color factors for development of convenient whiteness meter. The whiteness value of milled rice according to degree of milling could be converted into b and Hunter whiteness in Lab color system. B in RGB color system at high values of determination coefficient were 0.990, 0.985, and 0.989, respectively.

• Journal of Biosystems Engineering
• /
• v.31 no.6 s.119
• /
• pp.524-528
• /
• 2006

This study was performed to develop experimental model for milling degree and whiteness from analysis the CBB (colored bran balance) index using NMG dying and image processing. The endosperm layer increased and the pericarp, aleurone layer and CBB index decreased as the milling degree and whiteness increased. So, CBB index was closely linked to milling degree and whiteness. A empirical CBB index model was developed according to the milling degree and whiteness. The model were found to fit adequately to all test data with a coefficient of determination of 0.99, and therefore the CBB model proved to be quite applicable.

• Journal of English Language & Literature
• /
• v.64 no.2
• /
• pp.239-252
• /
• 2018

Many critics on William Faulkner's As I Lay Dying have read Addie Bundren as the disrupter of patriarchal power. By raising a question about the usefulness of language, which is the symbolic power of patriarchy and having an affair with the preacher Whitfield outside her wedlock, Addie directly challenges patriarchal power. From a quite different vantage point, however, we can read Addie as the faithful protector of the norm of whiteness in the South in light of the social hierarchy. As a former school teacher, Addie is from middle class before her marriage. By her marriage to Anse, who is a lower-class white, Addie has class anxiety that her social status in the stratum of whiteness could be degraded from a middle to a lower-class white, "white trash," which means that she is not white enough to be considered as the normative whiteness. Especially, Addie's anxiety increases due to the fact that her lazy husband is reluctant to work and relies on her neighbors, causing her family to be entrapped at the bottom in the stratum of whiteness. Therefore, she decides to take revenge on her husband after giving birth to her second child Darl by asking Anse to bury her dead body in her familial burial site in Jefferson. By rendering her family to suffer the hardship during her funeral procession, not only does she succeed in taking revenge on Anse on the surface, she regains her social status as a middle-class white by being buried in Jefferson fundamentally.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.445-456
• /
• 1998

This study was carried out to evaluate the performance of a medium scale rice polisher of 2.5 t/h and to improve its performance for producing the clean rice with high quality. The maximum internal pressure, broken rice ratio. whiteness in the rice polisher were investigated, and the effects of outlet resistance, water spraying rate, shaft revolution speed and rice moisture content on the polishing performance were analyzed to find out proper operating conditions. The conclusions of this study were as follows: 1. In the performance evaluation of the polisher, the broken rice ratio increment of 0.1%, the max. internal pressure of about 11 N/${cm}^2$, and whiteness increment of 2.2~3.7 resulted at the conditions of 20 PS driving power, 950 rpm, 150 cc/min water spraying rate, 44.1 Nㆍcm outlet resistance and about 15% rice moisture content. 2. Though max. internal pressure and whiteness at the 17% rice moisture content were higher than those at the 15% moisture content under the same operating conditions of the polisher, but the broken rice rate at the 17% moisture content was absolutely low compared with that at 15% moisture content. The water spraying effect to reduce broken rice and to increase whiteness was much significant at the 15% moisture content not significant at 17% moisture content. 3. The main parameter of the performance was outlet resistance, and low resistance of about 44.1 Nㆍcm was recommended at the polisher. 4. The proper water spraying rate in the polisher was about 150 cc/min. 5. As the shaft revolution speed decreased from 950 rpm and 800 rpm to 650 rpm, the broken rice ratio increased and whiteness decreased. 6. As the driving power of the polisher increased from 20 PS to 30 PS, the max. internal pressure decreased by about 1~2.5 N/${cm}^2$ and whiteness increased by about 1~2, but the broken rice rate was not changed. 7. The proper operating conditions of the polisher seemed to be the revolution speed of 800-950 rpm, the water spraying rate of about 150 cc/min, the oulet resistance of about 44.1 N.cm and 30 PS driving power.

• Journal of the Korean Ceramic Society
• /
• v.15 no.2
• /
• pp.85-88
• /
• 1978

Influence of cooling atmosphere on the whiteness in white portland cement was studied. The effective composition of gaseous medium of cooling atmosphere is desirable less than 0.5% of $O_2$ and 0.5~1.5% of CO. When theclinker is quenched in nitrogen atmosphere, the color of clinker becomes bright pink. In a weakly reducing gaseous medium or vacuum, the absence of oxygen brings defects in crystal and transformation in the coordination of iron, and as a result, whiteness is raised.

• Journal of Biosystems Engineering
• /
• v.15 no.1
• /
• pp.33-43
• /
• 1990

Spectral reflectance of paddy, brown rice, milled rice, greenish grain, yellow grain and denatured grain were measured over the range of 340 to 820 nm with "Double Beam Spectrophotometer(Model UV-180)". Variation in the reflectance depending on milling degree of milled rice appeared greatest over the range of 420 to 500 nm, and that between white rice and other rice samples appeared greatest near 500 nm. On the basis of the above results, a whiteness meter to measure milling degree of rice was manufactured using tungsten lamp, photodiodes and amplifier, and its performance was compared with the existing whiteness meters (KETT and Z-II optical sensor). There were very high correlations among those whiteness meters.

• Korean Journal of Materials Research
• /
• v.13 no.9
• /
• pp.555-560
• /
• 2003

Ag-coated Cu particles were prepared by dropping method of coating agent and were evaluated by scanning electron microscope and color difference meter. The shape of Cu particles having obvious crystal plan and edge was changed spherically according to the increase of Ag coating amount. When the Ag coating amount was 50 wt% to Cu particles, the whiteness of Ag-coated Cu particles was almost similar to that of pure Ag particles. Adding $NH_4$OH in reductant solution could increase effectively the whiteness of the Ag-coated particles. The Ag-coated particles having the highest whiteness was obtained when the content of hydrazine in reductant solution was 0.48 M.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.3
• /
• pp.222-227
• /
• 1999

The weavability and bleaching of ramie/silk mixture fabrics were examined. When silk fiber was used as warp or weft in the mixture fabrics, the weaving properties became higher than that of ramile fabrics. Especially, the highest weavabiliy of mixture fabrics was obtained when used as warp silk fiber. The whiteness of ramie and tussah fiber treated with hydrogen peroxide, bleaching agent. was increased up to about 80% without significant changes of tenacity and elongation. As the increase of bleaching agent and treatment time, the whiteness of mixture fabrics was increased and the yellowness was decreased. Also, as the whiteness of mixture fabrics increased, the drape stiffness in warp direction was decreased but crease recovery was increased.