• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.151-156
• /
• 1987

Eleven F$_1$ rice hybrids were developed by using the genetic male sterile lines having the backgrounds of Korean variety. The average heterosis, heterobeltiosis and standard heterosis for grain yield were 15.2%, 8.7% and 17.9%, respectively. Significant heterobe1tiosis for number of grains per panicle was observed. The leaf blast reaction of the hybrids was mostly similar to that of the more resistant parent. Amylose content of the hybrids ranged from 20.5% to 22.5% and protein content from 10.4% to 11.1%. The degrees of alkali digestion value, white center or white belly, clearance and heading date of the hybrids were almost same as their parents.

• Korean Journal of Agricultural Science
• /
• v.44 no.3
• /
• pp.416-423
• /
• 2017

This study aimed to identify milling characteristics depending on the rotating speed of the main shaft of the cutting-type rice milling machine which can minimize the conventional milling process. Brown rice, which was produced in Gunsan-si, Jeollabuk-do, Republic of Korea, in 2016, was used as the experimental material. The milling characteristics of white rice were measured under four different rotating speeds of main shaft: 950 - 1,050 rpm, 1,000 - 1,100 rpm, 1,050 - 1,150 rpm, and 1,100 - 1,160 rpm. For each shaft speed, 300 kg of brown rice was processed, and the milling characteristics were measured according to the whiteness, grain temperature, cracked rice ratio, broken rice ratio, turbidity, and energy consumption. The whiteness of rice grain was found to be consistent at around $40{\pm}0.5$ only when milled at the shaft speed of 950 - 1,050 or 1,000 - 1,100 rpm. The grain temperature during the milling process increased by 11.35 to $11.85^{\circ}C$, showing little differences amongst shaft speeds. The cracked rice ratio increased by 8.2 to 10.4% at all conditions. The broken rice ratio ranged from 0.58 to 0.76%, reflecting a low level. The turbidity after milling was 54.8 ppm when milled at 1,000 - 1,100 rpm. Energy consumption of 12.98 and 12.18 kWh/ton were recorded at the shaft speed of 1,000 - 1,100 and 1,050 - 1,150 rpm, respectively. The result of this study indicates that the optimal rotating speed of main shaft would be 1,000 - 1,100 rpm for a cutting-type rice milling machine.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.214-219
• /
• 1991

To clarify the relationship between ambient water temperature and heading characteristics of rice (Oryza sativa L.), twelve of varieties rice were grown in a cold tolerance screening field where water temperature was controlled by continuous cold water irrigation system to test the cold tolerance of rice. When cold water was continuously irrigated with 5 cm of water depth, the water had stagnated for about three hours, and the water temperature increased gradually from inlet toward outlet in the experimental plot. The fluctuation of water temperature was well synchronized with that of ambient air temperature, and the water temperature near outlet became higher than the air temperature at the vegetative phase, while became lower at the reproductive phase of rice plant community. The leaf development rates on main culm increased by increased water temperature. The rice varities, Fukuhikari, Sangpungbyeo and YR3486-16-2 were more sensitive than the others in the response of leaf development to water temperature. However, Janack and Milyang 42 were comparatively less sensitive to water temperature in leaf development. Janack and Paro -white rices required longer days to develop one leaf on main culm at reproductive phase than at vegetative phase. Varietal difference in days required to develop one leaf on main culm of rice plant was more distinctive at the reproductive phase when water temperature was relatively lower than at the vegetative phase with relatively higher water temperature condition. No difference was found between the growth phases, vegetative and reproductive, in the response of average leaf developmental rates to water temperature under the similar air temperature condition. The estimated average days required to develop one leaf on main culm decreased by 1.3 day by 1$^{\circ}C$ increase in water temperature. Varietal differences in the total number of leaves on main culm depended upon the water temperature, in which the varieties such as Fukuhikari, Gwangmyeon-gbyeo, China 988, and YR3486-16-2 showed increased one leaf by increased water temperature, while Sobaekbyeo, Paro-white, Sangpungbyeo, Pungsanbyeo, Samgangbyeo, and Milyang 42 were kept at the same leaf number regardless of water temperature. However, the total leaf number on main culm and days to heading of Janack increased by increased water temperature. The other varieties showed the shortened days to heading by the increase in water temperature with noticeable varietal differences regardless of the variation in the total number of leaves on main culm.

• Korean Journal of Environment and Ecology
• /
• v.22 no.3
• /
• pp.301-308
• /
• 2008

We conducted the survey about the avian fauna, population, community and correlation between avian population and densities of the fallen rice grain in Cheonsu reclaimed area(Ganwol and Bunam Lake and reclaimed land) from Oct. 2006 to Mar. 2007. Total surveyed species number was 142 species, sum of maximum count of each species was 362,797 individuals, sum of average count of each species was 84,818 individuals. Comparing with early and late wintering season, number of species was stable in each survey time, but total population was decreased as the season progressed. Dominant species were Bean Geese Anser fabalis, Baikal Teals Anas formosa, White-fronted Geese Anser albifrons, Mallards Anas platyrhynchos and Pintails Anas acuta. Population fluctuation of the Bean Geese Anser fabalis, Baikal Teals Anas formosa, Mallards Anas platyrhynchos, PintailsAnas acuta was decreasing, but population of the White-fronted Geese Anser albifrons was stable. Number of species, total population were not significantly different among Ganwol, Bunam and Cheonsu Bay. Survey period was significantly correlated with species diversity and population in each area, and most community indices of each area were shown significant correlation. The density of the fallen rice grain was significantly different between the harvested rice paddy by big harvesting machine and small harvesting machine. Density of the fallen rice grain in stubble collected area was significantly different with area of stubble not collected. Density of the fallen rice grain was drastically decreased in the middle of wintering season, but not significantly different between Dec. 2006 and Feb. 2007. Avian population was strongly correlated with number of fallen rice grain in the same period.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.3
• /
• pp.150-155
• /
• 2001

The hull dehydration in dough stage did not serious affect the rice yield though grain appearance texture may decline by severe occurrence of the symptom. As to white head in heading stage of rice, the occurrence of hull dehydration in 1998 was directly affected by high temperature, low air humidity and sometimes of strong wind and sunshine in early September. At harvest stage, 1,000-grain weight of brown rice was not found to be significantly different between the hull dehydrated grains and normal ones. That reason can be considered that the hull dehydration occurred hill was not injured on the leaf and rachis branches therefore the function of assimilation and translation of rice plant was not affected. The ratio of imperfect rice kernel such as green, cracked and white belly increased. The increase of cracked rice by the hull dehydration may caused by concurrent dehydration of kernel, or by insufficient water supply into kernel due to breaking of vascular bundles in glume.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.11-19
• /
• 1982

The average weight of larvae, the percentage of survival larvae and the percentage of moth emergence in first and second generation of striped rice borer showed lower values in Akibare(Japonica variety) compared with those in Milyang 23 (Indica variety). At higher nitrogen level the larvae weight in second generation of striped borer was increased. The percentage of survival larvae in second generation was gradually decreased by applying the silicate fertilizer in both cultivars. The moth emergences in both generations of striped rice borer were also lower at high levels of silicate fertilizer. The percentage of white head of rice plant was reduced by the application of silicate fertilizer. The ratio of SiO$_2$ to T-N of the rice stem was related negatively with the percentage of survival larvae and the moth emergence in second generation of striped rice borer, and also with the percentage of white head of rice plant.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.22-26
• /
• 2010

Seven rice germplasms with red pigmentation within the pericarp were isolated from a large mutant collection. These red pericarp phenotypes resulted from the functions of the Rc, Rd and RdRc genes. Among them, two brown pericarp of the Rc type, four red pericarp of the RdRc type, and one white pericarp of the Rd type were identified. Morphological and agronomic characteristics of those rice germplasms were studied. The Rc type germplasms have the faint red or brown color pericarp and the Rd types produce the white pericarp, whereas the RdRc type germplasms have the dark red pericarp. Most of the important agronomic characteristics including plant stature, tillering ability, spikelet fertility, and total grain yield were lower in the colored rice than those of the wild-type control. All of the studied colored rice germplasms had a tendency of easy seed-shattering in comparison to the control. These characteristics of newly identified germplasms will be useful for identifying the genes responsible for pericarp color phenotype determination.

• Journal of Plant Biotechnology
• /
• v.32 no.2
• /
• pp.85-90
• /
• 2005

This study was conducted to investigated the major characteristics of genetically modified rice of 'Milyang 204' originated from Dongjinbyeo compared to a non-transgenic rice varieties Dongjinbyeo and Jun-ambyeo. Basta resistant transgenic rice lines carrying bar gene produced by the Yeongnam Agricultural Research Institute were evaluated for their agronomic characters. The transgenic Japonica rice of 'Milyang 204' showed inferior phenotypic traits compared to a non-transgenic rice variety Dongjinbyeo and Junambyeo. On the basis of UPOV (Union Internationale Pour la Protaection des Obtentions Vegetables) and NSMO(National Seed Management Office) the transgenic 'Milyang 204' showed difference in some traits out of some agronomic traits, such as leaf color, angle of flag leaf, number of spikelets, culm length, white core and white belly compared to the non-transgenic varieties rice.

• Journal of Life Science
• /
• v.22 no.9
• /
• pp.1173-1179
• /
• 2012

The importance of genetic stability and bio-safety in the environment has recently been recognized for many (genetically modified) GM plants. This study evaluated the GM safety of transgenic rice and its environmental variance. Data on agronomic characters and principal component were collected for vitamin A-enriched GM rice and four check cultivars in a large GM field trial during 2009-2011. The cultivation environment was a large GM field and a greenhouse. In this experiment, there was no significant difference between the agronomic characters of the GM rice and those of a donor plant, 'Nagdong'. In terms of grain characteristics, the appearance and physicochemical characteristics of the GM rice and those of the donor plant were similar. However, the grain of the GM rice developed a white core and a white belly when planted in the greenhouse. The type and distribution of dominant weed species were not different in the GM rice and the 'Nagdong'. In addition, gene flow was not detected in the dominant weed species based on PCR analysis.

• Journal of Animal Science and Technology
• /
• v.65 no.2
• /
• pp.377-386
• /
• 2023

The effect of different commercially available bedding materials on the growth performance and carcass characteristics of ducks for 42 days was investigated. 336 one-day-old White-Pekin ducklings (60.48 ± 0.16 g) were randomly allocated into 24-floor pens with one of the three beddings namely i) coco peat, ii) rice husks, or iii) sawdust. 14 ducklings per pen and 8 replicate pens per bedding material were used. Birds were fed a starter diet from days 1-21 and a grower diet from days 22-42. Weekly growth performance evaluation was conducted for the average body weight, weight gains, daily feed intake, and feed conversion efficiency. One bird per pen was sacrificed on day 42 for the evaluation of carcass characteristics including the carcass, breast, and leg muscle percentages. Breast and leg muscle samples were then collected and analyzed for their proximate and pH values. Higher body weights (p < 0.05) were noticed with rice husks on day 42 only. Improved daily gains (p < 0.05) were also noticed for birds raised with rice husks over the entire period (days 1-42). Concerning feed intake, higher values (p < 0.05) were similarly noted with rice husks for the grower phase (days 22-42), and the entire experimental period (days 1-42). Marginally improved feed intake values were also noted with the use of rice husks as the bedding materials on day 42 (p = 0.092). Improved feed efficiency (p < 0.05) was noticed with rice husks on day 35, the grower period, and the entire 42-day period. However, no significant differences were noticed for most of the carcass characteristics that were evaluated. Nevertheless, higher (p < 0.05) pH values for the breast muscle were noticed with the use of coco peat and sawdust as the bedding. Conclusively, the bedding type could have a significant impact on the growth performance of ducks without adverse effects on carcass characteristics. The use of rice husks as bedding might be advantageous and is therefore recommended.