• Journal of Environmental Science International
• /
• v.16 no.7
• /
• pp.799-804
• /
• 2007

Oil spill caused severe effects on the marine fauna and flora due to direct contact of organisms with the oil and even in regions not directly affected by the spill. This study was conducted to understand the effects of the oil spill accidents and the use of dispersant on the red tide of Cochlodinium polykrikoides. Crude oil produced in Kuwait, bunker-C, kerosene and diesel oil, and a chemical dispersant produced in Korea, were added with a series of 10 ppb to 100 ppm in the f/2-Si medium at $20^{\circ}C$ under a photon flux from cool white fluorescent tubes of $100\;mol\;m^{-2}\;s^{-1}$ in a 14: 10 h L:D cycle for the culture of C. polykrikoides. In low concentrations of ${\leq}$ 1 ppm of examined oils no impact on the growth of C. polykrikoides was recorded, while in high concentration of ${\geq}$ 10 ppm, cell density was significantly decreased with the range of 10 to 80% in comparison with the control. The growth of C. polykrikoides after the addition of the dispersant and the mixtures combined with oils and a dispersant of ${\geq}$ 10 ppm appeared to decrease, whereas the growth of C. polykrikoides exposed to ${\leq}$ 100 ppb showed little serious impact. However, almost all the C. polykrikoides cells were died regardless of a dispersant and combined mixtures within a few days after the addition of high concentrations.

• Tribology and Lubricants
• /
• v.24 no.1
• /
• pp.7-13
• /
• 2008

In this work, a simple and low cost sensor technique is proposed to test oil color in real time using in-line sensor. It is presented to use a ratio of intensity in red wavelength range to intensities of green and blue wavelength ranges (defined as a 'chromatic ratio') in order to estimate the oil color change. The proposed sensor technique is realized by irradiating a white LED as light source and a RGB color sensor as photoreceiver, and the chromatic ratio of various types of used oils are measured. The results show that chromatic ratio generally reflects chemical deterioration of oil, including oil oxidation and thermal degradation. It is concluded that the proposed sensor could be used for an effective oil monitoring technology.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.1
• /
• pp.17-26
• /
• 1994

The present study was carried out in atheroscleorotic New Zealend white(NZW) rabbits. to evaluate the effect of dietary supplementation with Korean pinenut oil, on plasma total fatty acid composition. In study I, NZW rabbits were fed 10 weeks on a commercial chow diet supplemented with 5% of energy as fats(soybean oil or pinenut oil) or 10% of energy as fats(soybean oil or pinenut oil) with the addition of 1% cholesterol to the diet. Nineteen fatty acids ranged from myristic acid (14:0) to cervonic acid (22:6 ${\omega}3$) were identified in all the samples. The c5, c9, $c12{\sim}18$ : 3 acid was not reported in the fatty acid methyl ester profiles of each group because it was included in the linoleic acid peak. The major constitutent fatty acids in the chow diet group were linoleic acid, oleic acid, palmitic acid and ${\alpha}$-linolenic acid. In the cholesterol group, oleic acid, linoleic acid and palmitic acid were the major fatty acids. In plasma of cholesterol-fed animals, the levels of 16:1 ${\omega}$ 7 and 18:1 1 ${\omega}$ 9 were increased. Linoleic acid was the major fatty acid in soybean oil/cholesterol and pinenut oil/cholesterol groups. Plasma linoleic acid levels were significantly incresed from 4 to 6% by the supplementation of 5% soybean or 5% pinenut oil in the cholesterol diet for 5 weeks, compared to cholesterol group. Plasma 16 : 1 ${\omega}$ 7 levels in animals fed with 5 or 10% pinenut oils were significantly lower than in those fed cholesterol for 5 weeks. After 10 weeks on the soybean oil and pinenut oil diet there were no significant differences in the fatty acid composition. In study II, the fatty acid composition was not affected by the types or levels of oils supplemented for 5 weeks. After 10 weeks on the oil diets 16:1 ${\omega}$ 7 and 18:1 ${\omega}$ 9 were decreased in 10% soybean in oil/cholesterol and 10% pinenut oil/cholesterol groups, compared to cholesterol group.

• Korean Journal of Organic Agriculture
• /
• v.23 no.2
• /
• pp.373-390
• /
• 2015

This study investigated the effect of coated feed using mixed oil on rumen fermentation characteristics. Two experiments were conducted based on materials that were mixed. First, cashew nut and soybean oils were mixed with white mineral oil. And second, different plant extracts were mixed with white mineral oil. At first experiment, inclusion levels of mixed oil on diet (0.03%, 0.1%, 0.5%) were applied as variables. A coated diet was fermented with rumen inoculum according to in vitro rumen fermentation and its parameters were investigated. In the result of first experiment, no negative effects on rumen pH were found. Significantly decreased dry matter digestibility was detected at 0.5% treatment (P<0.05). Total gas productions in control and 0.03% were significantly greater than those of others (P<0.05). Significantly reduced methane productions were found in all treatments compared to the control (P<0.05). Inclusion of mixed oil did not affect on ammonia production. Total volatile fatty acid production was also not influenced by coating with mixed oils. Rumen fermentation parameters were greatly changed according to introduced plant extracts at second experiment. The significantly lowest and greatest ammonia productions were found at treatments with Ixeris dentata and Plantago asiatica, respectively (P<0.05). The significantly greatest acetate and propionate productions were detected at treatments with Crucuma longa and Zizyphus vulgaris 1, respectively (P<0.05). All treatments, except Chrysanthemum idicum, Euyale ferox seed, Moringa leaf and fruit and Zizyphus vulgaris 1, showed significantly increased total volatile fatty acid production compared to the control (P<0.05). Only Paeonia lactiflora showed significantly lesser gas production than the control (P<0.05). In methane production, Ceramium, Zizyphus, Paeonia, Agrimonia, Torilis, Mugwort, Foeniculum, Euphorbia, Taraxacum, Artemisia, Momordica, Curcuma and Moringa reduced methane significantly compared to the control (P<0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.6
• /
• pp.843-847
• /
• 2004

In order to understand the effects of different oils on the production performances and polyunsaturated fatty acids and cholesterol level in the yolk. 160 Hexices hens at 42 wks were divided into four groups randomly. Each group fed with control diet (CG), control diet+5% fish oil (FG), control diet+5% palm oil (PG) and control diet+5% soybean oil (SG), respectively. After three weeks' experiment, the results showed that: different oils showed no significant effect on feed/egg weight, egg white weight, body weight, C16, C18:3 n-6 and C20:4 n-6 contents in the yolk (p>0.05). But the egg mass of PG was higher than SG (p<0.05), the average egg weight of CG was lower than FG (p<0.05), and the of PG was lower than FG (p<0.05), during the experiment, FG gained more than SG (p<0.05), the cholesterol level in yolk of FG was lower than PG and CG (p<0.01), meanwhile the C20:5 n-3 content of FG was higher than CG and SG (p<0.01), and no C20:5 n-3 was detected in PF, as far as C22:6 n-3 in the yolk was concerned, FG was higher than PG (p<0.01), the C18:1 n-9 content of SG was lower than PG (p<0.05), the C18:2 n-6 content of SG was the highest than other three groups (p<0.01), and CG was the lowest, showed significant to FG (p<0.05), the C18:3 n-3 content of FG was higher than SG and PG (p<0.05), and the C20:1 n-9 content of FG was higher than other groups (p<0.01). The results demonstrated that fish oil could decrease the cholesterol and increase the n-3 fatty acids content in the yolk, and increase the n-3/n-6 level.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.94-94
• /
• 2020

Safflower, a draught and salt tolerant oil seed crop of Compositae family, has been cultivated around the world mainly as source of edible oils and dyes, where India, the USA, Mexico, Australia, and Ethiopia contributing about 85% of the production altogether. In this study we have characterized some selected morphological properties of safflower plant and determined the the total phenolic content (TPC) and fatty acid composition in seeds of 237 genetic resources. All the seed coats were white colored while the petals had red, yellow and white pigments. The yellow was the predominant petal color being recorded in 182 accessions followed by red occurring in 49 accessions. The petal color of 47 of the accessions changed with development while the 190 accession showed no change of color. The leaves are ovate to obovate, mostly with dentate (21 moderate and 205 weak) and few smooth (11) margins. The plant length, leaf length, and leaf width were ranged between 65.7 and 160.8 cm, 14.3 and 37.0 cm, and 3.3 and 12.1 cm, respectively. The TPC was determined using Folin-Ciocalteu method and fatty acid compositions were evaluated using gas chromatography. The TPC content ranged from 23.71 to 132.72 µgGAE/mg dried extract (DE). The seeds of safflower genetic resources accounted an average crude fat content of 26.25% (14.84 to 41.70%). The total fatty acid is mainly comprised of 71.72% linoleic acid (18:2) and 20.08% oleic acid (18:1) on average, the remaining palmitic acid (16:0), stearic acid (18:0) and linolenic acid (18:3) contributing 5.84, 2.23 and 0.15 %, respectively. The fatty acid composition of safflower seeds has shown great variability, where oleic and linoleic acid have a wide range of variation, from 9.23 to 83.35% and from 10.46 to 82.62%, respectively

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.249-254
• /
• 2004

The pressing of car body parts is one of the most important sheet metal drawing processes. The corrosion protection oil applied by the steel mills plays a part in every sheet metal forming operation and also makes up the largest proportion of lubricants used. The idea to combine the corrosion protection properties of a corrosion preventive oil with the lubricity of a drawing oil lead to the development of the Anticorit prelubes. Applied at the finishing lines of the steel mills, they finally serve as lubricant in the press shops. A prerequisite for the suitability of a prelube-type oil is the absolute compatibility with all single processes from the coil to the Body in White. The use of prelubes in steel mills reduces the number and quantity of spot lubricants for additional press shop oiling dramatically. But their true benefits can only be fully achieved if the compatibility principle is applied throughout the manufacturing chain. Therefore, modem prelubes systems are modular, even different viscosities can be part of the same concept. This results in a far-reaching multifunctionality of the Anticorit prelube system for all applications.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.3
• /
• pp.5-21
• /
• 2020

Bungkang (Syzygium polyanthum) is a medium to tall plant which produces medicinal root-bark, the plant is normally found along inland river bank and produces small white flowers and fruits. Essential oils are among the most interesting components of the plant extracts consisting mostly of monoterpenoid or sesquiterpenoids. They are used as therapeutic agents in ethno, conventional, and complementary alternative medicines. Investigation and evaluation of the essential oil of Syzygium polyanthum as well as the antibacterial, antioxidant and antifungal activity was ascertained. The experiment was performed. 100 chemical constituents were obtained and two pure compound was isolated as Eugenol (1) and Farnesol (2). Significant growth inhibition of Staphylococcus aureus, (ATCCⓒ25923) Klebsiellia pneumonia (ATCCⓒ19155), Salmonella typhi (ATCCⓒ14028) and Escherichia coli (ATCC©25922) and the fungal strains Aspergillus flavin, Aspergillus niger, Candida, tropicalis, and Fusarium oxysporium was observed from the essential oil at concentration of 500 ㎍/mL. Antioxidant potential was observed to be strong of 18.42 ㎍/mL when compared to the control of 15.23 ㎍/mL. The result indicated that the oil obtained from root-bark of Syzygium polyanthum can be considered as an agent for antioxidant, antibacterial and antifungal in pharmaceutical food and cosmetic industries trails.

• Microbiology and Biotechnology Letters
• /
• v.50 no.1
• /
• pp.71-80
• /
• 2022

Lipases (triacylglycerol acylhydrolases [EC 3.1.1.3]) are water-soluble enzymes. They catalyze the hydrolysis of fats and oils. A cold-active lipase from marine Bacillus cereus HSS, isolated from the Mediterranean Sea, Alexandria, Egypt, was purified and characterized. The total purification depending on lipase activity was 438.9 fold purification recording 632 U/mg protein. The molecular weight of the purified lipase was estimated to be 65 kDa using sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. The optimum substrate concentration, enzyme concentration, pH, and temperature were 1.5 mM, 100 µl, pH 6 and 10℃, respectively. The lipase was tolerant to NaCl concentrations ranging from 1.5 to 4.5%. The lipase was affected by the tested metal ions, and its activity was inhibited by 16% in the presence of 0.05 M SDS. The application of the cold-active lipase for the removal of an oil stain from a white cotton cloth showed that it is a promising biological agent for the treatment of oily wastes and other related applications. To the best of our knowledge, this is the first report of the purification and characterization of a lipase from marine B. cereus HSS isolated from the Mediterranean Sea.

• Clean Technology
• /
• v.17 no.3
• /
• pp.259-265
• /
• 2011

The textile industry is suffered from air pollution problems which must be resolved. In particular, white smoke and odor after the tenter process require abatement. The major air pollution problem in the textile industry occurs during the finishing stages, where various chemicals are used for coating the fabrics. Lubricating oils, plasticizers, and water repellent chemicals are the fabric treatment chemicals. The coated fabrics are cured by heating in tenter facility. In this process, most of air pollutants emitted into the air. White smoke is basically made up of tiny solid or liquid particles of VOCs less than one micron in size. The oil mist can be carried over long distance from their point of origin. The most effective method of removing odor from tenter process is to get rid of tiny oil mist at the emitted gas. For this reason, the full-scale EFC (Electric Fume Collector) of 700 CMM was tested for removing odorous substances emitted from tenter facility. As a result of this study, odor and white smoke can be eliminated effectively and quite large amounts of oil can be recovered.