• Journal of Periodontal and Implant Science
• /
• 제27권3호
• /
• pp.575-584
• /
• 1997

The quality of periodontal instrument cutting edge is a basic element of effective root planing procedure. Using instruments, the sharp edge is changed into blunt or beveled edge. With the blunt instrument, the periodontal treatment can't be carried into accuracy and effective. The study on the wear of periodontal curet is insufficient, there are few publications about the change of sharpness of cutting egde after using instrument and a certen reports were published on the study of scanning electron microscope(SEM) examination. In this study, to declare the number of strokes for sharpening of instruments, the changes of cutting edge is measured by the clinical methods, tactile sensitivity examination and refraction light-white line test after scaling strokes and root planing strokes. SEM test was added for defined the changes of cutting edges. The 7/8 Gracey curets that have been never used was tested. Maxillary molars which were extracted from the School of Dental Medicine, Dankook University was used. Subjected teeth had attachment loss more than 6 mm in bucca-lingual surface and sufficient calculus of a band type in cervical area. The strokes of curet were executed 3, 5, 7, 9, 11, 13 times on scaling stroke and 10, 15, 20, 25, 30, 35 times on root planing stroke. A resident has periodontal experience over 3 years carried out the clinical examinations those tactile sensitivity examination and refraction light-white line test 5 times. The case there being tactile sensitivity certenly is 2, the case being felt tactile sensitivity is 1, and the case there not being tactile sensitivity is 0. The visual examination was recorded as following. The case that refracted white line is not recognised is 2, the case that uncerten is 1, and the case that acknowledged is 0. The results were obtained as follows. 1. After scaling strokes, the tactile sensitivity was reduced after 11 strokes and disappeared in 13 strokes. 2. In tactile sensitivity after root planing procedures, sensitivity was reduced after 25 strokes and disappeared in 35 strokes. 3. In case of visual examination, the detection of refracted white line was increased after 9 strokes of scaling procedures and the accuracy of wear wasn't showed after root planing procedures. 4. In SEM, metal projection was observed on new periodontal curet cutting edge and it was disappeared after scaling procedures. 5. In SEM, the cutting edge was showed changing linear into an aspect of the surface after 5 strokes of scaling procedures and 10 strokes of root planing procedures and showed beveled edge in 11 strokes of scaling procedures, 25 strokes of root planing procedures. The results of 3-type examination indicated that the sharpening of curet should be performed after 11 strokes of scaling procedures and 25 strokes of root planing procedures.

• 한국엔터테인먼트산업학회논문지
• /
• 제14권4호
• /
• pp.187-198
• /
• 2020

이 글은 한국영화 가운데 색채를 의도적이거나 관습적으로 활용한 사례들을 분석하였다. 장르영화 대부분이 관례적 활용 빈도가 높으며, 색채를 의도적으로 부각시킨 미학적 선택 또한 예술영화에 한정되지 않고 다양한 양식으로 나타난다. 영화색채의 시각적 인상만큼이나 그것의 분석과 해석은 주관적일 수 있다. 보기의 객관성을 위해 색채에 관한 오랜 문화적 관점을 채택하고, 유사성과 차이에 따라 발생하는 의미를 제시하고자 하였다. 영화색채 하양의 활용 양상의 분류는 보편적이고 일반적인 절대선, 특수한 사례로서의 강박과 치유, 성의 구분 없이 여성성의 특성을 보여주는 전형과 시각적 쾌락, 미학적 용어인 프레임의 경계를 넘어서는 유령적 사유라는 범주에서 접근하였다. 특정한 장르, 작가, 영화를 세밀하게 분석하는 미시적 방법보다는 하양을 시각장치로 활용하는 영화들의 유형별 특성을 분류해보고, 색채 활용의 미학적이고 문화적인 의미를 고찰하였다. 첫째, <악인전>(2019), <범죄와의 전쟁: 나쁜 놈들 전성시대>(2011), <불한당: 나쁜 놈들의 세상>(2016), <아수라>(2016), <나쁜 녀석들>(2019) 같은 영화들에서 하양이 절대선을 표현하는 시각의 전형으로 기능한다. 둘째, <기생충>(2019)의 공포와 불안, <곡성>(2016)의 악몽, <슈퍼맨이었던 사나이>(2008)의 과대망상, <기억의 밤>(2017)의 신경쇠약, <마더>(2009)의 광기, <윤희에게>(2019)의 강박, <밀양>(2007)의 히스테리 등이 가학과 피학을 시각적으로 강조하는 사례들이다. 셋째, <태극기 휘날리며>(2004), <포화 속으로>(2010), <마이웨이>(2011>, <고지전>(2011), <명량>(2014), <연평해전>(2015), <봉오동전투>(2019), <장사리: 잊혀진 영웅들>(2019) 등에서 여성 인물에 부여되는 하양이 전통적인 이미지를 고착시킨다. 넷째, 사회정치적 변화를 반영하는 <박하사탕>(2000), <변호인>(2013), <택시운전사>(2017), <1987>(2017) 등에서 하양이 역사의 순간을 기억하고 기록한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권8호
• /
• pp.1069-1074
• /
• 2014

In China and South East Asia, the duck (common duck) is important in egg production for human consumption. Plumage color is a breed characteristic and of economic importance, together with egg production. Our aim in this study was to investigate the inheritance of plumage color in three Chinese indigenous egg-type duck breeds, Shan Ma (S), Putian White (F) and Putian black (P), and some of their crossbreds. These three breeds have different plumage color and are used in crossbreeding. The crossbred laying ducks $F{\times}(P{\times}S)$ and $F{\times}(S{\times}P)$ showed highly improved laying ability but heterogeneous plumage color. Genotypes at four relevant loci were investigated by studying down color and pattern in ducklings after crossbreeding. $F_1$ ducklings from the matings $F{\times}S$ and $S{\times}F$, $P{\times}S$, and $S{\times}P$ were classified into four classes of plumage color (the Shan Ma plumage color, black, white, or multicolored) over three generations. Parents were selected for the Shan Ma plumage color of their progeny. In the fourth generation, P male and P female ducks were selected according to the frequency of the desired class of plumage color (Shan Ma) of their $F_1$ progeny to obtain the so-called "Brown Putian Ma duck". The Shan Ma duck genotype was identified as having the restricted mallard color pattern ($M^RM^R$), full expression of any of the patterns or colors (CC), no extended black (ee) and no brown dilution D (D). The Putian White genotype was recessive white (cc), no extended black (ee) and no brown dilution D (D). The Putian Black genotype exhibited full expression of extended black (E gene) and no brown dilution (CCEE D [D]). It was shown that $F{\times}S$ and $S{\times}F$ tests should be implemented to eliminate the recessive white c allele in the S line and the dominant extended black E allele in the F line. It was also shown that the Brown Putian Ma obtained from Putian Black, with no extended black genotype (ee), could be used to get rid of the black plumage (E gene) in the crossbred ducks. This could provide a solution for producing 3-way crossbred ducks Putian $White{\times}$(Putian-$Ma{\times}Shan$ Ma) and Putian $White{\times}$(Shan $Ma{\times}Putian$-Ma), with the desired Shan Ma feather color.

• 한국버섯학회지
• /
• 제6권3_4호
• /
• pp.121-125
• /
• 2008

수집균주들의 온도에 따른 특성을 분석하여 비교적 고온에 적응하는 균주를 선발하고 이를 이용하여 백색계동을 육성한 후 이 계통과 기존의 백색품종과의 교잡을 통하여 새로운 품종 '백로'를 육성하였다 백로 팽이버섯의 균사배양 최적온도는 $25^{\circ}C$이나 병재배시 배양온도는 비교적 높은 $18{\sim}20^{\circ}C$이므로 적정 배양일수는 21일로 기존 백색재배종보다 2~3일 빠른 시기에 실시하여야 발이가 균일하다. 자실체발생 적온은 기존품종과 같은 $7^{\circ}C$, 생육온도는 $25^{\circ}C$로 일본계 품종의 버섯 생육온도와 동일하다. 백로팽이는 갈색야생종과 교배로 육성된 계통이지만 자실체의 갓 및 대색깔이 순백계통의 백색이다. 또한 버섯발이가 고르고, 대가 긴 특징을 가진 고품질 다수성 품종으로 갓은 반구형이다. 백로는 기존 백색팽이 품종보다 환기를 더 많이 요구하기 때문이므로 이 품종에 맞는 재배환경으로 재배관리를 조절할 필요가 있다.

• 한국의류산업학회지
• /
• 제5권5호
• /
• pp.465-469
• /
• 2003

The present study revealed; that (1) The students majoring in a piano course were the preference type of the performance dress - best line was designed of upper form chest. It was 1.5cm shorter than armhole line, the princess line was preferred Top one piece without sleeves which was designed with slim by bottom line through west dart form best line. The expression method was showing embroidery and bidding, colors were in order to white, ivory, black and blue style. The material was in order to silk with glorious shinning, silk satin and race style. (2) The students majoring in a vocal music were the preference type of the performance dress - the princess line was designed shorter, the west line of back and forth was preferred the one piece of bulk style divided with three partitions. Neck line was 5cm shorter than the middle of back, 9cm shorter than the side neck position, 9cm shorter than the middle of forth, sweet heart neck line with circular sleeve designed 7cm shorter than the side neck position. Colors were in order to ivory, red and yellow style. The material was in order to silk with glorious shinning silk satin and race style.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.116-121
• /
• 2020

With the recent development of the 4th Industrial Revolution, efforts have been made to carry out communication in a smart factory, farm, etc. at low cost and reliably. Methods for utilizing empty frequencies using TVWS(TV White Space) have been studied which can be used locally within 30 km. However, there have not been many studies on Path-Loss model considering Korean environment. In this paper, the Path-Loss model is divided into LOS (Line Of Sight) and NLOS (None LOS). In case of LOS model, we checked the difference between Free space model, Friis model, 2-ray model and Hata model with measured data. In the case of NLOS model, we checked the difference between Lee Model, ITU-R526-3 Model with measured data. In order to overcome the difference in Korean environment, we derived a model that can be applied in LOS and NLOS and prove its usefulness through performance evaluation through simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.122-122
• /
• 2001

In this research, an Electronic White Board Control System is developed that stores and prints the data written on the white board. This control system is constructed using an embedded single board PC, whose function is the acquisition(from CCD image sensor system), processing and storing of the data on the screen. The properties of this system are as follows: 1. The system is able to move the screen on the right and left. 2. The system is able to output the data written on the screen to a connected printer. 3. The system is controlled by an external remote PC connected to the system by serial line as well as by the keys on the control panel. The data written on the screen can be sent to the external PC and then can be modified and stored...

• Rapid Communication in Photoscience
• /
• 제2권1호
• /
• pp.34-37
• /
• 2013

Two novel antenna complexes of $Eu^{III}$ with 1-naphthoic acid (NA) as primary ligand and two aromatic N-donor ligands namely N-hexyl-N-(pyridin-2-yl) pyridin-2-amine (1) and 4-((dipyridin-2-ylamino)methyl)benzoic acid (2) have been synthesized and characterized by various spectroscopic techniques. The room-temperature (298 K) photoluminescence spectrum of $Eu^{III}$ complexes composed of typical line like emissions, assigned to transitions between the first excited state $^5D_0$ to the $^7F_J$ (J = 0-4), resulting in red emission along with the residual emission from the 1-naphthoic acid moiety in the blue region. The determined CIE color coordinate value for the complex 2 is (x = 0.36, y = 0.34), which is in white region.

• 로봇학회논문지
• /
• 제6권2호
• /
• pp.165-172
• /
• 2011

This paper presents a robust lane detection algorithm based on RGB color and shape information during autonomous car control in realtime. For realtime control, our algorithm increases its processing speed by employing minimal elements. Our algorithm extracts yellow and white pixels by computing the average and standard deviation values calculated from specific regions, and constructs elements based on the extracted pixels. By clustering elements, our algorithm finds the yellow center and white stop lanes on the road. Our algorithm is insensitive to the environment change and its processing speed is realtime-executable. Experimental results demonstrate the feasibility of our algorithm.

• 대한심미치과학회지
• /
• 제13권1호
• /
• pp.31-39
• /
• 2004

For the prosthodontic results which are compatible with esthetics to be fulfilled, the first prerequisite would be periodontal intervention and stability, the second one may be functional competency and the ultimate goal should be ascribed to esthetic considerations. Other words, esthetic dentistry is a whole entity which encompasses the biological stability of the periodontium, physical accuracy of the prosthodontic structure and finally, the beauty which can be found in natural dentition. It also implies the harmonized lip line which reveals the well-balanced tooth morphology and health gum profiles (Red-White Esthetics). Largely, there lie some differences in the input system of the 3-dimentional data from the prepared abutments between respective computer-assisted systems available now. But the manufacturing systems (CAM) are very similar between them, to say, comprise numeric control systems with whole 3-dimensional milling units according to the restorations to be made. Now the author is going to present CAD/CAM Zirconia All Ceramic Restoration on the topics for the Red-White Esthetics, periodontal control and maintenance, treatment for the discolored teeth, post & core build-up works for the devitalized teeth, characteristics of the Zirconium oxide All Ceramics, fabrication procedures, clinical considerations and its application to diverse clinical situations.