• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.6
• /
• pp.720-731
• /
• 2003

Statement of problem. The importance of fixture design and surface treatment. Purpose. The clinical success of dental in plants is affected by many factors such like as degree of osseointegration, the effective load dispersion for the prostheses, and a lot of attempts have been made to overcome the difficulties. In this study, efforts were made to find the possibility of clinical acceptance of the dental implants of newly designed surface and resorbable blast media surcace. Materials and methods. In this study, two groups of custom-made, screw-shaped implants were prepared. The first with the consisting of Branemark clone design and the other with the new design. These implants were divided into four groups according to the kinds of surface treatment. Four implants($AVANA^{(R)}$, Osstem, Busan, Korea)of each group were installed in twenty rabbits. Group A was consisted of Branemark done implant left as machined, Group B with Branemark clone implants with RBM(Resorbable blast media) surface, Group C with newly designed implants left as machined and Group D with newly designed implants with RBM surface. One of the twenty rabbits died from inflammation and the observation was made for six weeks. Specimens from four groups were observed using scanning electron microscopy with 40, 100, 1000 magnification power and microsurface structures were measured by white-light scanning interferometry for three dimensional surface roughness measurements(Accura $2000^{(R)}$, Intek-Plus, Korea.). Removal torque was measured in 17 rabbits using digital torque gauge(MGT 12R, Mark-10 corp., NY, U.S.A.) immediately after the sacrifice and two rabbits were used for the histologic preparation(EXAKT $310^{(R)}$, Heraeus Kulzer, wehrheim, Germany) of specimens and observed under light microscope. Resonance frequency measurement($Osstell^{(R)}$) was taken with the 19 rabbits at the beginning of the implant fixation and immediately after the sacrifice. Results. Following results were taken from the experiment. 1. The surface of the RBM implants as seen with SEM had rough and irregular pattern with reticular formation compared to that of fumed specimens showing different surface topographies. 2. The newly designed implant with RBM surface had high removal torque value among four groups with no statistical significance. The average removal torque was $49.95{\pm}6.70Ncm$ in Group A, $51.15{\pm}4.40Ncm$ in Group B, $50.78{\pm}9.37Ncm$ in Group C, $51.09{\pm}4.69Ncm$ in Group D. 3. The RFA values were $70.8{\pm}4.3Hz$ in Group A, $71.8{\pm}3.1Hz$ in Group B, $70.9{\pm}2.5Hz$, $72.7{\pm}2.5Hz$ in Group D. Higher values were noted in the groups which had surface treatment compared to the untreated groups with no statistical significance. 4. The results from the histomorphometric evaluation showed a mean percentage of bone-to-implant contact of $45{\pm}0.5%$ in Group A, $55{\pm}3%$ in Group B, $49.5{\pm}0.5%$ in Group C, and $55{\pm}3%$ in Group D. Quite amount of newly formed bone were observed at the surface RBM-treated implants in bone marrow space.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.626-631
• /
• 2006

This study was carried out to investigate the physical characteristics (height, body lenght, chest depth, head type, ear type, body color, eye type and tail type) and genetic diversity using 15 microsatellite DNA markers (PEZ 1, 5, 8, 10, 11, 12, 13, 15, 16, 17, 20, 21, FHC 2010, FHC 2054 and FHC 2079) in 44 random Miryang native dogs(6 months${\sim}$12 years old). The height, body lenght, and chest depth of Miryang native dogs were 43-55 cm(mean 49.5 cm), 45-60 cm(mean 54.3 cm), and 50-64 cm(mean 57.9 cm), respectively. Miryang native dog was medium sized. The head and eye type were reverse-triangle(100%), triangle (90.9%) and newborn moon(9.1%), respectively. Most of body color had white coat color(93.2%), light pink tongue color(100%), light black anal color(90,9%) and pink claw color(100%). The ear type showed erect ear(100%), and half-curled(56.8%), upward(34.1%), curled(9.1%) in tail type, respectively. Number of alleles observed at a single locus ranged from 2 (PEZ 21 and FHC 2010) to 14 (PEZ 13), with average number of alleles per locus of 6.13. The expected heterozygosities of 15 microsatellite loci were estimated based on gene frequencies. The highest expected heterozygosity, 0.863 was estimated in PEZ 13 locus and the lowest, 0.455 in PEZ 21 and FHC 2010 locus. And the mean expected heterozygosity of 15 microsatellite markers was calculated as 0.635. Polymorphic information content (PIC) values were ranged from 0.348 (PEZ 21 and FHC 2010) to 0.837 (PEZ 13), and the mean PIC value was calculated as 0.570. Of the 15 markers, PEZ 10, PEZ 13, PEZ 17 and FHC 2054 loci have relatively high PIC value (> 0.7) in Miryang native dog. In order to determine the efficieney of parentage control, exclusion probabilities (PE) were calculated for each allele. The highest PE 1 and PE 2 in PEZ 13 locus was caculated to 0.548 and 0.710, respectively. And the total exclusion power in PE 1 and PE 2 was calculated to 0.9895 and 0.9996, respectively. These results can give basic information for perservation and research in Miryang native dog, and phylogenetic relationships of the Korean native dog and Asian dog breeds.

• Horticultural Science & Technology
• /
• v.19 no.1
• /
• pp.60-65
• /
• 2001

'Shinil' pear cultivar (Pyrus pyrifolia Nakai) which was originated in a cross between 'Shinko' (non-patented, released in 1941) and 'Hosui' (non-patented, released in 1972) in 1978 was released as a middle season harvest variety. Its usual picking time coincided with 'Chuseok' season which is one of the most famous national holiday in Korea. The fruit showed high soluble solids content and good appearance. The cultivar was preliminarily selected in 1991, and its regional adaptability was evaluated in the name of 'Wonkyo Na-13' at 9 sites for four years from 1992, and finally selected and named in 1995. 'Shinil' is medium in tree vigor like 'Hosui' and spreading in tree habit as 'Niitaka', a leading cultivar in Korea, and consistently very productive. It has high resistance to black rot caused by Alternaria kikuchiana and pear necrotic spot caused by pear necrotic spot virus. Its full bloom is one day earlier than that of 'Niitaka' cultivar and harvest time is September 25 at Suwon area which is 3 days later than that of 'Hosui'. Fruit is round in shape with a deep medium stalk cavity and medium calyx basin and has attractive light yellow brown skin color. The fruit weight ranges between 300 and 400 g, which is similar to 'Chojuro', 'Shinko', and 'Hosui'. Soluble solid content is approximately at the level of 13-14 Brix, which is higher than that of 'Chojuro'. The flesh is cream-white, very juicy, and light grit with soft and fine texture.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.684-689
• /
• 2010

'Sangwon', a new cultivar for vegetable soybean, was developed from the cross between 'Keunolkong' and 'Oshimamidori', and was released at the National Institute of Crop Science (NICS) in 2007. The goal to develop a vegetable soybean cultivar with green pod, early maturity, large seed size, high yield, lodging tolerance, and resistance to disease such as soybean mosaic virus (SMV). 'Sangwon' has light green pod, early maturity, large seed, short plant height, and lodging tolerance. 'Sangwon' has determinate growth habit, white flower, gray pubescence, and oval leaf shape. The matured seeds have a yellow seed coat with light brown hilum, and a yellow cotyledon. 'Sangwon' has 5.8 cm fresh pod length, 13.2mm fresh pod width, 69.5 g seed weight per 100 green seeds, 44.0% green seed protein content, and 14.8% green seed oil content. At the regional yield trials (RYT) for vegetable soybean from 2005 to 2007, 'Sangwon' shows strong resistance to soybean mosaic virus (SMV) and tolerance to lodging in fields. Fresh pods of 'Sangwon' were harvested at the beginning of August. In the same tests, fresh pod of 'Sangwon' (10.39ton/ha) yielded 5% higher than 'Hwaeomputkong' (9.90ton/ha).

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.178-184
• /
• 2019

Strawberry ($Fragaria{\times}ananassa$) is one of the most important and popular fruit crops in the world, and 'Sulhyang' is one of the principal cultivars cultivated in the Republic of Korea for the domestic market. The growth and flower induction in strawberry is the process which influences directly on fruit bearing and yield of this crop. In this study, effect of benzyladenine (BA), gibberellic acid ($GA_3$), and salicylic acid (SA) on growth and flower bud induction in strawberry 'Sulhyang' was investigated. The 3-week-old runner plants, grown in 21-cell propagation trays, were potted and cultivated in growth chambers with $25^{\circ}C/15^{\circ}C$ (day/night) temperatures, 70% relative humidity (RH), and light intensity of $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ photosynthetic photon flux density (PPFD) provided by white light emitting diodes (LEDs). The runner plants were treated with one of three concentrations, 0 (control), 100, and $200mg{\cdot}L^{-1}$ of BA, $GA_3$, or SA solution. The chemicals were sprayed two times on leaves of runner plants at an interval of two weeks. After 9 weeks the results showed that the application of all chemicals caused reduction of root length and chlorophyll (SPAD) content as compared to the control. The lowest chlorophyll (SPAD) content was recorded in plants treated with $GA_3$. However, the treatment of $200mg{\cdot}L^{-1}$ $GA_3$ promoted leaf area, leaf fresh weight, and plant fresh weight. The greatest flower induction (85%) and number of inflorescences (4.3 inflorescences per plant) were observed in the treatment of $200mg{\cdot}L^{-1}\;SA$, followed by $100mg{\cdot}L^{-1}\;SA$. Overall, results suggest that foliar application of $GA_3$ solution could accelerate plant growth, while foliar application of SA solution could induce hastened flowering. Further studies may be needed to find out the relationship between $GA_3$ and SA solutions treated in a combination, and the molecular mechanism involved in those responses observed.

• Journal of Mushroom
• /
• v.17 no.2
• /
• pp.52-63
• /
• 2019

Agrocybe spp. belongs to the Agaricales order, Bolbitiaceae family, and Agrocybe genus. In Korea, so far, it has been cultivated through bottle cultivation; therefore, this study was conducted for the development of a new cultivar using the bag cultivation method for quantitative improvement. Thirty-three gene resources of Agrocybe spp. were collected and their quantity and characteristics of bag cultivation were examined. Next, 5 kinds of crossing parents were selected based on the cultivation period and shape of the fruit body. Seven strains were selected through 3 cross combinations. The 7 selected strains and the comparative cultivar 'Cham' were cultivated in a bag. As a result, the cultivation period was 49 days for 'JBAC15-1' and 50 days for 'JBAC15-6' which are 4 days and 3 days less than the cultivation period of the comparative cultivar 'Cham'(53 days), respectively. Cultivation periods of other strains except for 'JBAC15-1' and 'JBAC15-1' were longer than that of the comparative cultivar'Cham'. The best ratio of primordia formation among the selected strains was found to be that of 'JBAC15-1' with 96.1% followed by 'JBAC15-6' with 94.5%. These rates were 3.1% and 1.5% higher than the ratio of primordia formation of the comparative cultivar 'Cham', which is found to be 93.0%. The quantity was maximum in the 'JBAC15-1' cultivar with 176.8 g per bag followed by 'JBAC15-6' with 168.7 g per bag. The quantities were 10% and 5% more than the comparative cultivar 'Cham' with 160.7 g per bag. Based on these results, 'JBAC15-1' and 'JBAC15-6', which had shorter cultivation periods and more quantities than the comparative cultivar 'Cham' were finally selected. For the selected strains of 'JBAC15-1' and 'JBAC15-6', mycelial growth was observed to be optimal on PDA medium and the optimum temperature was $27.5^{\circ}C$. The optimum pH was pH 5 for 'JBAC15-1' and pH 6 for 'JBAC15-6'. The color of the pileus of the fruit body was dark brown in 'JBAC15-1' and 'Cham' and light brown in 'JBAC15-6'. The pileus was hemispherical in shape in both 'JBAC15-1' and 'Cham'. However, the colors of the stem were different - light brown in 'JBAC15-1', white in 'JBAC15-6', and ivory in the comparative cultivar 'Cham'.

• Korean Journal of Poultry Science
• /
• v.13 no.1
• /
• pp.1-14
• /
• 1986

The subject of this study was to obtain some genetic information for developing superior layer chickens. Heterosis and combining ability effects were estimated with 5,759 progenies of full diallel crosses of 6 strains in White Leghorn. Fertility, hatchability, brooder-house viability, rearing- house viability, laying-house viability, age at 1st egg laying, body weight at 1st egg laying, average egg weight, hen-day egg production, hen-housed egg production, and feed conversion were investigated and analyzed into heterosis effect, general combining ability, specific combining ability and reciprocal effect by Grilling's model I. The results obtained were summarized as follows; 1. The general performance of each traits was 94.76% in fertility, 74.05% in hatchability, 97.47% in brooder-house viability, 99.72% in rearing-house viability, 93.81% in laying-house viability, 150 day in the age at 1st egg laying, 1,505g in the body weight at 1st egg laying, 60.08g in average egg weight, 77.11% in hen-day egg production, 269.8 eggs in hen-housed egg Production, and 2.44 in feed conversion. 2. The heterosis effects were estimated to -0.66%, 9.58%, 0.26%, 1.83%, -3.87%, 3.63%, 0.96%, 4.23%, 6.4%, and -0.8%, in fertility, hatchability, brooder-house viability, laying-house viability, the age at 1st egg laying, the body weight at 1st egg laying, average egg weight, hen-day egg Production, hen-housed egg production and feed conversion, respectively. 3. The results obtained from analysis of combining ability were as follows ; 1) Estimates of general combining ability, specific combining ability and reciprocal effects were not high in fertility. It was considered that fertility was mainly affected by environmental factors. In the hatchability, the general combining ability was more important than specific combining ability and reciprocal effects, and the superior strains were K and V which the additive genetic effects were very high. 2) In the brooder-house viability and laying-house viability, specific combining ability and reciprocal effects appeared to be important and the combinations of K${\times}$A and A${\times}$K were very superior. 3) In the feed conversion and average egg weight, general combining ability was more important compared with specific combining ability and reciprocal effects. On the basis of combining ability the superior strains were F, K and B in feed conversion, F and B in the average egg weight. 4) General combining ability, specific combining ability and reciprocal effects were important in the age at 1st egg laying and the combination of V ${\times}$F, F${\times}$K and B${\times}$F were very useful on the basis of these effects. In the body weight at 1st egg laying, general combining ability was more important than specific combining ability and reciprocal effects, relatively. The K, F and E strains were recommended to develop the light strain in the body weight at 1st egg laying. 5) General combining ability, specific combining ability and reciprocal effects were important in the hen-day egg production and hen-housed egg production. The combinations of F${\times}$K, A${\times}$K, and K${\times}$A were proper for developing these traits. 4. In general, high general combining ability effects were estimated for hatchability, body weight at 1st egg laying, average egg weight, hen-day egg production, hen-housed egg production, and feed conversion and high specific combining ability effects for brooder-house viability, laying house viability, age at 1st egg laying, hen-day egg production and hen-housed egg production, and high reciprocal effects for the age at 1st egg laying.

• Journal of Sericultural and Entomological Science
• /
• v.18 no.2
• /
• pp.65-78
• /
• 1976

The mulberry small weevil, Baris deplanata ROELOFS, has highly infested mulberry trees in Korea. As the damage caused by the mulberry small weevil in mulberry fields has been increased over the country since 1969, the authors has carried out a series of biological and controlling studies on the pest from 1971 to 1972. The results obtained are summarized as follows. 1. The adult weevil is elongate oval in shape with black in color and the probocis is long as usual in curculionidae. The size of adult female is 3.30${\pm}$0.04mm in length, 1.47${\pm}$0.04mm in width, and the length of proboscis is 1.25${\pm}$0.014mm, while adult male is 3.28${\pm}$0.06mm in length, 1.40${\pm}$0.04mm in width, and the length of proboscis is 1.30${\pm}$0.02mm. The antenna is geniculate consisting of 12 segments. The terminal sternite of the abdomen has a pointed tip in male but not in female. 2. The egg is long oval in shape, milky white in color, 0.51${\pm}$0.05mm in length and 0.32${\pm}$0.02mm in width. 3. The mature larva is cylindrical and light yellowow in color except the head of dark brown, and legless, 3.88${\pm}$0.06mm in length, 1.40${\pm}$0.02mm width, each segment bearing many wrinkless and short setae. 4. The pupa is long oval, milky white and exarate, 3.53${\pm}$0.09 in length, 1.40${\pm}$0.03mm in width. 5. Majority of the species has one generation through a year and overwinters as adult in xylem of withered branch and come out again from late April to early May in next year. But some of the female oviposit in the same year and the offsprings overwinter as larva (0.4%) or pupa (0.1%) 6. The eggs are mostly laid under the cork layer of withered branch and the number of eggs deposited by an adult female is 73.44${\pm}$8.74, the average egg-laying period is 33.88${\pm}$6.04 days. The incubation period is 11.69${\pm}$0.39 days, the larval period 45.04${\pm}$1.63 and the pupal period 11.05${\pm}$0.49 days. The period of adult's activity is 46.7${\pm}$5.90 days. 7. The larvae feed on the cambium under the bark and adults feed on the winter bud, the latent bud, the leaf stalk and the base of newly shoot. 8. An active period of adults was observed during the period of 4 months from April to July. However, the peak of adult-density occurred in the early May (in the fields of spring-prunning) and early to middle June(in the fields of summer-prunning). 9. There is a positive correlation between the density of larvae and diameter and length of the branches. 10. The pattern of distributions of the adult of mulberry small weevil is negative binomial distribution. 11. The chalcid fly was disclosed to be a natural enemy which was parasite on the larvae of mulberry small weevil and its parasitic ratio was 11.9%. 12. Phosvel D, Malix D, Salithion EC, DDVP EC, and Phosvel EC were effective for the control of adults and Satchukoto-S EC, and Salithio EC were effective for the control of larvae.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.4
• /
• pp.265-278
• /
• 2011

Clayey ores of the Jeonnam province mainly consist of pyrophyllite (monoclinic), kaolinite (1T), and minor amounts of quartz, muscovite, and feldspars. Mineralogical studies revealed that two kinds of clay minerals were mainly produced from the volcanic sediments with similar ages and compositions. Kaolinite deposits sometimes contain neither diaspore nor corundum, but alunites are often found in the upper portions of the kaolin ore bodies. On the other hand, corundum and diaspore are commoner in the pyrophyllite deposits than the kaolin deposits. As ages of rock formations are becoming younger, amounts of pyrophyllite and kaolinite are rather radically decreased, and finally disappeared. But muscovite, quartz, and plagioclase feldspars are inclined to be preserved because of weak alteration. Most of clay ore bodies contain purple tuff beds on the uppermost portion, and silicified beds, tuff, and lapillistone are found in an ascending order in the most of clay quarries. Chemical analyses show that higher contents of $Al_2O_3$ might not necessarily be due to the argillization, since some tuffs contain higher $Al_2O_3$ contents originated from feldspars. $SiO_2$ contents are fairly higher in the silicified beds than in those of adjacent formations, which might have been introduced from the ore bodies. And $K_2O$ contents are obviously lower than those of $Na_2O$ and CaO in the ores and their vicinities. Ignition losses of some of clays represent much higher contents than those of the ordinary ones because of the sporadic presence of alunite, diaspore and corundum which are accompanied with lots of $SO_4$ and $Al_2O_3$ contents. REE (rare earth element) abundances of most of volcanics and clay ores show rather higher LREE (light rare earth elements) contents, and represent small to moderately negative Eu anomalies. Though most of ores ususally show milky white color, fine-grained and well bedded formations which could be easily discernible in the most of outcrop. But more distinct characteristics are desirable where rather massive ore bodies exist. Purple tuffs and silicified beds above the ore bodies would be useful as marker horizons/key beds since they have rather obvious lithology, extension and mineralogy than those of other adjacent formations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.388-388
• /
• 2016

Chemical mist deposition (CMD) of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) was investigated with cavitation frequency f, solvent, flow rate of nitrogen, substrate temperature $T_s$, and substrate dc bias $V_s$ as variables for efficient PEDOT:PSS/crystalline (c-)Si heterojunction solar cells (Fig. 1). The high-speed camera and differential mobility analysis characterizations revealed that average size and flux of PEDOT:PSS mist depend on f, solvent, and $V_s$. The size distribution of mist particles including EG/DI water cosolvent is also shown at three different $V_s$ of 0, 1.5, and 5 kV for a f of 3 MHz (Fig. 2). The size distribution of EG/DI water mist without PEDOT:PSS is also shown at the bottom. A peak maximum shifted from 300-350 to 20-30 nm with a narrow band width of ~150 nm for PEDOT:PSS solution, whose maximum number density increased significantly up to 8000/cc with increasing $V_s$. On the other hand, for EG/water cosolvent mist alone, the peak maximum was observed at a 72.3 nm with a number density of ~700/cc and a band width of ~160 nm and it decreased markedly with increasing $V_s$. These findings were not observed for PEDOT:PSS/EG/DI water mist. In addition, the Mie scattering image of PEDOT:PSS mist under white bias light was not observed at $V_s$ above 5 kV, because the average size of mist became smaller. These results imply that most of solvent is solvated in PEDOT:PSS molecule and/or solvent is vaporized. Thus, higher f and $V_s$ generate preferentially fine mist particle with a narrower band width. Film deposition occurred when $V_s$ was impressed on positive to a c-Si substrate at a Ts of $30-40^{\circ}C$, whereas no deposition of films occurred on negative, implying that negatively charged mist mainly provide the film deposition. The uniform deposition of PEDOT:PSS films occurred on textured c-Si(100) substrate by adjusting $T_s$ and $V_s$. The adhesion of CMD PEDOT:PSS to c-Si enhanced by $V_s$ conspicuously compared to that of spin-coated film. The CMD PEDOT:PSS/c-Si solar cell devices on textured c-Si(100) exhibited a ${\eta}$ of 11.0% with the better uniformity of the solar cell parameters. Furthermore, ${\eta}$ increased to 12.5% with a $J_{sc}$ of $35.6mA/cm^2$, a $V_{oc}$ of 0.53 V, and a FF of 0.67 with an antireflection (AR) coating layer of 20-nm-thick CMD molybdenum oxide $MoO_x$ (n= 2.1) using negatively charged mist of 0.1 wt% 12 Molybdo (VI) phosphoric acid n-Hydrate) $H_3(PMo_{12}O_40){\cdot}nH_2O$ in methanol. CMD. These findings suggest that the CMD with negatively charged mist has a great potential for the uniform deposition of organic and inorganic on textured c-Si substrate by adjusting $T_s$ and $V_s$.