• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.92-92
• /
• 2000

Ni을 coating 하지 않은 Si 기판에 바이어스를 인가하여 기존의 아이아몬드 결정입자가 아닌 탄소 튜브와 유사한 whisker 형태의 탄소 막을 Hot filament CVD 법으로 증착하였다. 제작된 시료는 SEM, Raman, 그리고 XRD로 형상과 성분, 그리고 결정구조를 분석하여 전계 방출 소자로 이용하기 위한 기본적인 전계방출 특성을 조사하였다. Raman 스펙트럼에 의한 조사 결과 whisker의 구성성분은 비정질 흑연임을 확인하였다. 증착 시 바이어스 전압이 높아짐에 따라 whisker의 형태가 가늘고 길어지는 경향을 보였으며 CH4 농도와 기판 온도가 증가할수록 whisker의 지금이 커지는 현상을 나타내었다. 방출전류밀도는 가늘고 긴 whisker 일수록 증가하는 경향을 나타내었다. 또한 NH3를 첨가한 결과 매우 뾰족한 원뿔의 형태로 증착되었으며 구동전압이 2 V/$\mu$m의 낮은 값을 나타내었다. 따라서 whisker를 전계 방출 소자로 사용할 경우 구성성분이 흑연이며 그 형태가 침상 또는 원뿔이므로 구동전압이 낮아지고 방출 전류가 증가하는 등 향상된 전계 방출 특성을 나타내었다.

• 한국세라믹학회지
• /
• 제28권12호
• /
• pp.1012-1018
• /
• 1991

SiC whisker-reinforced LAS matrix composites were developed by a mixed colloidal processing route. An optimization of processing conditions was made using the zeta potential data of silica, boehmite, and SiC whisker dispersions. Similarly, the SiC whisker-reinforced composites were also fabricated by the conventional sol-gel process using the hydrolysis-condensation reaction of relevant metal alkoxides. The composites fabricated by the mixed colloidal processing route were characterized by a uniform spatial distribution of SiC whisker throughout the matrix. The fracture toughness increased from 1.3 MPa.m1/2 for the LAS specimen to 5.0 Mpa.m1/2 for the hot-pressed composite (95$0^{\circ}C$ and 20 MPa for 20 min) containing 20 wt% SiC whisker. The increase in fracture toughness appears to result mainly from the crack deflection and the crack bridging by whiskers with some additional toughenings from the whisker pullout and the matrix prestressing mechanisms.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.173-175
• /
• 2003

At the low temperature of $950^{\circ}C$ the $\mu\textrm{m}$-sized whisker growth during the catalytic CVD of pyrolytic carbon from methane with $H_2$- and Ar-gas on quartz substrate with NiO powder was found in this work. In the preliminary study it was observed from pure methane pyrolysis without catalyst at the high temperature $1500~1700^{\circ}C$. If the growth whisker should be stopped at initial stage, about 20 min. of the methane pyrolysis, it would be nanosized whisker growth. The screw growth mechanism and unique mechanical properties of whisker for composites were also recognized. If the pyrolysis would be continued, we could found also spiral growth of whistlers with diameter of about 1, 5 mm. The large length of whisker was about 10 cm in 20 minute.

• The Korean Journal of Ceramics
• /
• 제5권1호
• /
• pp.12-18
• /
• 1999

Alumina matrix composites reinforced with up to 20vol% of aligned SiC whiskers were fabricated by tape casting and hot pressing. Alumina composited with randomly distribution SiC whiskers were also fabricated in order to investigate the effect of whisker alignment on properties of the composites. XRD and optical microscopy were used to examine the whisker orientation. The fracture toughness increased with increasing whisker content, and it was higher in the direction normal to the tape casting direction.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.220-224
• /
• 1999

Sliding wear test was employed to determine the effect of whisker content and orientation on the firiction and wear behavior of SiC whisker reinforced alumina. Composites containing unidirectionally oriented whiskers were prepared by a modified tape casting followed by lamination, binder removal and hot pressing in order to align the whiskers in the tape casting direction. Wear coefficients on three directions were measured; parallel and normal to the tape casting direction on the tape casting surface and normal to lamination direction on surfnce normal to the tape casting direction. In the effect of whisker orientation, the highest wear rate was obtained in the direction parallel tape casting direction and the lowest in the direction normal to lamination direction at all temperatures. Silicon oxide layer amoothing the surface was detected by energy dispersive X-ray analysis on the worn surface.

• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.785-790
• /
• 1993

Sialon ceramics are presently seen as promising materials with high hardness, strength, fracture toughness and corrosion resistance for friction and wear applications. The objective of present work is to improve of mechanical properties and wear resistance of $\alpha$-Sialon(x=0.4) by addition of SiC whisker. $\alpha$-sialon(x=0.4)/SiC whisker composites were obtained by hot-isostatic pressing at 173$0^{\circ}C$ for 1 hour under 1757Kg/$\textrm{cm}^2$ N2 pressure after pressureless sintering the mixture of Si3N4, Y2O3, AlN at 1780~180$0^{\circ}C$ for 3~5 hours in N2 atmosphere. As the amount of SiC whisker content increased, relative density and hardness were decreased, however fracture toughness, bending strength and tribological properties were improved. Tribological properties of $\alpha$-Sialon/15 vol% SiC whisker composite were improved in spite of its low mechanical properties.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1259-1264
• /
• 1994

$\beta$-Sialon has been regarded as one of promising materials showing high strength, fracture toughness, corrosion resistence and wear resistence. The improvement of the fracture toughness and tribological properties of $\beta$-Sialon (Z=1) has been attempeted by fabricating the $\beta$-Sialon/ SiC whisker composite. Each of green body composed of following ingredients, i.e., Si3N4, AlN, Y2O3 nd SiC, respectively, was first fired at 178$0^{\circ}C$ for 3hrs in N2 atmosphere and then post-HIPed at 173$0^{\circ}C$ for 1 hr under 170 MPa for N2 gas pressure. The fracture toughness, flexural strength and tribological properties increased with increasing SiC whisker content, despite the reduction of the relative density and hardness. $\beta$-Sialon/15 vol% SiC whisker showed a significant enhancement of wear resistance compared to the monolithic $\beta$-Sialon. The addition of SiC whisker caused the reduction of the density and hardness, but induced the increment of wear resistance.

• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.118-124
• /
• 2004

탄소환원질화법에 의해 합성된 질화알루미늄의 물성은 출발물질의 종류, 액상$.$기상 반응물질의 양, 분위기 그리고 합성온도에 따라서 많은 차이를 나타내었다 질화알루미늄 합성을 위하여 Al원으로는 $\alpha$-A1$_2$O$_3$를 사용하였고 환원제로는 카본 블랙을 사용하였으며, 기상반응을 유도하기 위하여 AlF$_3$를 사용하여 고순도 질소분위기에서 실험을 행하였다. 또한 액상반응 시 미세구조상의 변화를 확인하기 위하여 금속 알루미늄을 첨가하여 실험을 행하였다. 질화알루미늄이 생성과 침상형 휘스커상의 형상은 1$600^{\circ}C$의 온도에서 가장 잘 나타났으며 열처리 온도의 상승은 오히려 휘스커상의 형성을 방해하고 있음을 보여주었다. 침상형 휘스커의 합성에 가장 큰 영향을 주는 것은 기상반응을 일으키는 AlF$_3$ 첨가이며, AlF$_3$의 첨가량이 증가함에 따라 침상형 휘스커상을 확인하였다. 액상반응을 위한 금속 알루미늄 첨가는 전체의 15wt%까지는 침상형 휘스커가 증가하고 있음을 나타내었으나 l5wt% 이상으로 첨가하는 경우 오히려 휘스커가 감소하는 것으로 나타났다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1306-1309
• /
• 1997

Fabric hand feeling is an important property used in apparel industry. This paper shows a sensing method to output a fiber whisker's stick slip vibration by scanning it on the fabric. Then the vibration waveforms are transformed to the Symmetrized Dot Pattern images. Experimental results show that SDP images of fiber whisker's stik slip is potentially useful to the detection of fabric hand feeling values.

• 한국결정성장학회지
• /
• 제5권3호
• /
• pp.261-268
• /
• 1995

소성서냉법으로$K_2Ti_4O_9$ 중간상 휘스커를 제조한 다음, 비등수 및 산처리에 의하여$K_2Ti_6O_{13}$ 휘스커로 상전이 시키는데 있어서, 비등수 및 산처리 시간과 농도가 상전이 및 휘스커의 표면과 해섬(scattering a bundle of whisker)에 미치는 영향을 알아보았다. 그 결과 휘스커의 표면상태가 개선되었으며, 아울러 휘스커 간에 해섬을 유도하여 직경이 작으면서도 aspect ratio가 큰 양질의 휘스커를 얻을 수 있었다. 비등수 및 산처리는 휘스커의$K_2Ti_4O_9 {\leftrightarro} K_2Ti_6O_{13}$상전이를 유도하였는데 이러한 상전이는 $K^+$ 이온의 용출에 의해 진행되었다.