• 제목/요약/키워드: wet-work

검색결과 293건 처리시간 0.027초

고로슬래그 자극재로써 건식 및 습식 배연탈황석고의 활용가능성 평가 (Use of Flue Gas Desulfurization Gypsum as an Activator for a Ground Granulated Blast Furnace Slag)

  • 이현숙;김지현;이재용;정철우
    • 한국건축시공학회지
    • /
    • 제17권4호
    • /
    • pp.313-320
    • /
    • 2017
  • 화력발전소의 전력 생산을 위한 연료의 연소 시 발생한 황산화물의 제거과정에서 생산되는 배연탈황석고의 경우 현재까지는 적극적인 재활용이 되지 않고 있다. 본 연구는 화력발전소의 배연탈황공정인 건식, 습식공법을 통해 발생된 배연탈황석고의 슬래그 자극재로써의 활용가능성을 연구하기 위하여 일정량의 건식 및 습식 배연탈황석고를 고로슬래그 미분말에 치환하고, 슬래그 페이스트를 제작한 후, 그에 따른 수화반응 특성과 압축강도 특성을 분석해서 슬래그 자극재나 천연석고의 대체재로서 역할을 할 수 있는지 검토하고자 하였다. 본 연구의 결과에 따르면, 건식 배연탈황석고의 경우 별도의 알칼리 자극이 없어도 슬래그를 충분히 자극하는 것으로 보이며, 습식배연탈황석고의 경우 일정수준 이상의 알칼리 자극이 주어져야만 충분한 슬래그 자극효과를 볼 수 있는 것으로 나타났다. 또한 건식과 습식 배연탈황석고를 슬래그 페이스트에 적정량 치환하면 슬래그 페이스트의 압축강도 개선효과를 얻을 수 있는 것으로 나타났다. 추후 추가적인 연구를 통해 치환율에 따른 강도증진 성상을 정량적으로 규명하면 배연탈황석고의 효율적 경제적 재활용이 가능하게 될 것으로 사료된다.

천연소재 담배 필터 적용 방법 (The Natural Ingredient Application Method of Cigarette Filter)

  • 김민규;여운형;김수호;오경환;진용숙;황의일
    • 한국연초학회지
    • /
    • 제35권1호
    • /
    • pp.13-19
    • /
    • 2013
  • The natural ingredient has been utilized variety of the food and medicine. The aromatherapy well known prevent disease and healthy promotion using the essential oil derived extracted plants. In this work, natural ingredient include herb granulated for application of tobacco filter. That used by granulation using fluidized bed granulator(top-spray, bottom-spray and tangential-spray) and wet granule method. According to ingredient can used granulating method selectivity. So, we used fluid-bed granulator and wet granule method. Grapefruit extract coated sugar particle using the bottom-spray method and red ginseng granule granulated red ginseng powder using the tangential-spray method in a fluidized bed. Then, these granules applied the tobacco filter after due consideration add amount and operation efficiency. As a result, wet granule was loaded dual filter because that similarity carbon granule. And it was fitted in added 3mg/mm, per tip in the tobacco end part. Another type, fuidized bed granules was filled cavity filter because it has high hardness, sphere shape.

탄소와 목재섬유 혼합물을 이용한 전자기파 차폐용 시트의 제조 (The Manufacturing of Electromagnetic Shielding Sheet Using the Carbon and Wood Fiber Mixture)

  • 김형진;엄기증
    • 펄프종이기술
    • /
    • 제38권4호
    • /
    • pp.68-75
    • /
    • 2006
  • Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.

Genetic Variation in Growth and Body Dimensions of Jersey and Limousin Cross Cattle. 2. Post-Weaning Dry and Wet Season Performance

  • Afolayan, R.A.;Pitchford, W.S.;Weatherly, A.W.;Bottema, C.D.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제15권10호
    • /
    • pp.1378-1385
    • /
    • 2002
  • The importance of direct genetic, maternal, heterosis and epistatic effects were examined on post-weaning weight, height, length, girth, fat depth and muscle (ratio of stifle to hip width) with dry and wet season gains in these traits. The breeds used were two pure breeds (Jersey and Limousin), the Limousin${\times}$Jersey $F_1$, and two backcrosses ($F_1{\times}$Jersey dams and $F_1{\times}$Limousin dams). Direct genetic effects were large (p<0.001) for all traits except for length. Jersey maternal effects were large for weight, girth, fat depth and muscle in the post-weaning wet season gains which is an evidence of the impact of Jersey dam on progeny beyond weaning. There were large heterosis effects on fat depth and muscle relative to other traits. Epistatic effects were observed for post-weaning performance in weight, girth, fat depth and muscle. There are indications that there were different genetic effects for post-weaning compared to preweaning growth traits. Thus, it could be hypothesized from this study that different quantitative trait loci (QTL) affect early and late growth in Jersey and Limousin cross cattle breeds. The follow up work will examine the different chromosomal gene effects on pre- and post-weaning growth.

SBA-15 Supported Fe, Ni, Fe-Ni Bimetallic Catalysts for Wet Oxidation of Bisphenol-A

  • Mayani, Suranjana V.;Mayani, Vishal J.;Kim, Sang Wook
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권12호
    • /
    • pp.3535-3541
    • /
    • 2014
  • Bisphenol A is considered as pollutant, because it is toxic and hazardous to living organisms even at very low concentrations. Biological oxidation used for removing this organic from waste water is not suitable and consequently application of catalytic wet oxidation has been considered as one of the best options for treating bisphenol A. We have developed Fe/SBA-15, Ni/SBA-15 and Fe-Ni/SBA-15 as heterogeneous catalysts using the advanced impregnation method for oxidation of bisphenol A in water. The catalysts were characterized with physico-chemical characterization methods such as, powder X-ray diffraction (PXRD), FT-IR measurements, N2 adsorption-desorption isotherm, thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. This work illustrates activity of the catalysts for heterogeneous catalytic degradation reaction revealed with excellent conversion and recyclability. The degradation products identified were not persistent pollutants. GC-MS analysis identified the products: 2,4-hexadienedioic acid, 2,4-pentadienic acid and isopropanol or acetic acid. The leachability study indicated that the catalysts release very little metals to water. Therefore, the possibility of water contamination through metal leaching was almost negligible.

Wet Air Oxidation Pretreatment of Mixed Lignocellulosic Biomass to Enhance Enzymatic Convertibility

  • Sharma, A.;Ghosh, A.;Pandey, R.A.;Mudliar, S.N.
    • Korean Chemical Engineering Research
    • /
    • 제53권2호
    • /
    • pp.216-223
    • /
    • 2015
  • The present work explores the potential of wet air oxidation (WAO) for pretreatment of mixed lignocellulosic biomass to enhance enzymatic convertibility. Rice husk and wheat straw mixture (1:1 mass ratio) was used as a model mixed lignocellulosic biomass. Post-WAO treatment, cellulose recovery in the solid fraction was in the range of 86% to 99%, accompanied by a significant increase in enzymatic hydrolysis of cellulose present in the solid fraction. The highest enzymatic conversion efficiency, 63% (by weight), was achieved for the mixed biomass pretreated at $195^{\circ}C$, 5 bar, 10 minutes compared to only 19% in the untreated biomass. The pretreatment under the aforesaid condition also facilitated 52% lignin removal and 67% hemicellulose solubilization. A statistical design of experiments on WAO process conditions was conducted to understand the effect of process parameters on pretreatment, and the predicted responses were found to be in close agreement with the experimental data. Enzymatic hydrolysis experiments with WAO liquid fraction as diluent showed favorable results with sugar enhancement up to $10.4gL^{-1}$.

Investigation of Floor Surface Finishes for Optimal Slip Resistance Performance

  • Kim, In-Ju
    • Safety and Health at Work
    • /
    • 제9권1호
    • /
    • pp.17-24
    • /
    • 2018
  • Background: Increasing the slip resistance of floor surfaces would be desirable, but there is a lack of evidence on whether traction properties are linearly correlated with the topographic features of the floor surfaces or what scales of surface roughness are required to effectively control the slipperiness of floors. Objective: This study expands on earlier findings on the effects of floor surface finishes against slip resistance performance and determines the operative ranges of floor surface roughness for optimal slip resistance controls under different risk levels of walking environments. Methods: Dynamic friction tests were conducted among three shoes and nine floor specimens under wet and oily environments and compared with a soapy environment. Results: The test results showed the significant effects of floor surface roughness on slip resistance performance against all the lubricated environments. Compared with the floor-type effect, the shoe-type effect on slip resistance performance was insignificant against the highly polluted environments. The study outcomes also indicated that the oily environment required rougher surface finishes than the wet and soapy ones in their lower boundary ranges of floor surface roughness. Conclusion: The results of this study with previous findings confirm that floor surface finishes require different levels of surface coarseness for different types of environmental conditions to effectively manage slippery walking environments. Collected data on operative ranges of floor surface roughness seem to be a valuable tool to develop practical design information and standards for floor surface finishes to efficiently prevent pedestrian fall incidents.

Artificial muscles: Non-Stoichiometry Nature, Sensing and Actuating Properties and Tactile Sensibility

  • Otero T.F.;Lopez-Cascales J.J.;Vazquez-Arenas G.
    • KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
    • /
    • 제5B권2호
    • /
    • pp.118-122
    • /
    • 2005
  • Electro-chemo-mechanical devices or artificial muscles based on conducting polymers (CP) are presented as bilayers, CP/adhesive polymer, or as triple layers, CP/adhesive polymer/CP. Those soft and wet materials, working in aqueous solutions of a salt, mimic the composition of most organs from animals. Under electrochemical control, so working as new electrical machines, they produce continuous, reverse and elegant bending movements, mimicking those produce by animal muscles. By means of the current a perfect controls of the movement rate is attained giving soft and continuous movements. Muscles able to sense the chemical and mechanical conditions of work or muscle having tactile sense, as will be presented here, are being developed. All of them are founded on the non-stoichiometric nature of the soft and wet materials.

Modeling of Electrical Conductivity from $\sigma$tot vs. Po21/4 Plot in Wet Atmosphere for High-Temperature Proton-Conducting Oxides

  • Baek, Hyun-Deok
    • The Korean Journal of Ceramics
    • /
    • 제4권2호
    • /
    • pp.136-140
    • /
    • 1998
  • This work demonstrates a method for modeling of electrical conductivity in high-temperature proton-conducting oxides. Total conductivity was calculated assuming that it comprises partial conductivities contributed by protons, oxygen ions and electron holes. From the polt $\sigma_{tot}$ vs. $po_2\;{1/4}$ in wet atmosphere, thermodynamic and kinetic parameters were obtained representing transport properties such as concentration and mobility of the charge-carrying defects. The formulas for the calculation of partial conduction were derived based on the defect structure of HTPCs. Illustrative calculation were made for $SrCe_{0.95}Yb_{0.05}O_{2.975}$ system.

  • PDF

Effect of Ag Powder Sources on the Patterning of PDP Electrodes

  • Woo, Chang-Min;Kim, Soon-Hak;Hur, Young-June;Kim, Duck-Gon;Song, Gab-Duk;Lee, Yoon-Soo;Cho, Ho-Young;Park, Lee-Soon
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.953-955
    • /
    • 2006
  • In this work we compared different sources of composition of Ag powders obtained by dry and wet process on the photolithographic patterning of PDP electrode and resistance of sintered Ag electrode. It was found that 90 : 10 wt% ratio of Ag powder made by dry and wet processes gave optimum result both on the PDP electrode pattern and resistance of PDP electrode after sintering.

  • PDF