• 제목/요약/키워드: wet-dry

검색결과 1,947건 처리시간 0.028초

필터팩을 이용한 서울과 춘천, 안면도의 건성 강하량 측정 (Measurement of Dry deposition at Seoul, Chunchon and Anmyon-do by Using Filter pack Method)

  • 김만구;강미희;홍영민;박기준;이보경;이동수;김산
    • 한국대기환경학회지
    • /
    • 제17권1호
    • /
    • pp.19-29
    • /
    • 2001
  • Atmospheric concentrations of acidic pollutant were measured by the 4 stage filter pak method at Chunchon and by the 3 stage filter pack method at Seoul and Anmyon-do from January to December 1998. The sample was collected for 24 hours on every Wednesday. Concentrations of particulate matters were highest at Anmyon-do. The particulate concentration was much higher during the warm season than other seasons. While the particulate concentration was higher during the warm season, the concentration of gaseous matter was higher in winter. Dry deposition flux was calculated by using reported deposition velocities and concentration of pollutants measured in this study. The dry deposition velocities used in this study for SO$_2$, SO$_{4}^{2}$, HNO$_3$,NO$_{3}^{-}$ and NH$_3$ were 0.29, 0.15, 2.08( 2.13 only for Anmyon-do), 0.20 and 1.00cm/sec, respectively. At Chunchon, annual sulfur flux originated from dry deposition was 384 kg/$textrm{km}^2$, and the flux from wet deposition was 782kg/$textrm{km}^2$. Dry deposition of sulfur was 33% of total sulfur deposition. The annual nitrogen flux originated from dry deposition was 1,892kg/$textrm{km}^2$. And the flux from wet deposition was 1,066kg/$textrm{km}^2$. Dry deposition of nitrogen was 64% of total nitrogen deposition. Dry deposition as well as wet deposition have to be considerd in the study on acidification of environment such as soil or watershed.

  • PDF

탈곡성능(脱糓性能) 향상(向上)을 위(爲)한 요동(搖動)체 선별방법(選別方法) 개발(開發)에 관(關한) 연구(硏究) (Experimental Study on Development of Oscillating Sieve Separation Method for Improving Threshing Performance)

  • 김상헌;정창주;유수남
    • Journal of Biosystems Engineering
    • /
    • 제6권2호
    • /
    • pp.33-47
    • /
    • 1982
  • To modernize the conventional rice post production technology and reduce grain losses, a transition toward the wet-paddy threshing system has been strongly demanded. The head-feeding type thresher with pneumatic separation has been used dominantly for threshing dried-paddy, but some adverse effects in separation performance for threshing wet-paddy is encounterred. In order to solve the problems, the development of thresher with an additional oscillating sieve to the conventional pneumatic separation has been recommanded. This study was intended to evaluate the separating performance of thresher with oscillating sieve which was attached additionally to the conventional auto-thresher equipped with separation system of blower and suction fan. For different feed rates and rice varieties, wet-and dry-material were tested with threshers attached with and without oscillating sieve. Results of the study are summarized as follows: 1. When the feed rates were 480 and 640 kg/hr, there was no statistically significant difference in power reqirements between the threshers with and without an additional sieve device for both dry-and wet-threshing. However, when the feed rate was 960 kg/hr, power requirements of thresher without sieve were greater for wet-paddy threshing than the thresher with the additional sieve separator by about 20% points. 2. With additional oscillating sieve device, the ratios of total weights of whole grains including grains with branch let and damaged grains to the total output did not show statistical difference among the feed rates. However, with pneumatic separation the ratio was decreased as the level of feed rate increased. 3. The total amount of grains with branchlet (including broken panicle) increased with the moisture content. For both the wet-and dry-material threshing with the additional oscillating sieve, the percent of grains with branchlet to the total output decreased greatly as the feed rate increased. 4. The output of the damaged grains increased as moisture content decreased. Especially, for the dry-paddy threshing, the additional sieve separating device produced more damaged grains than the pneumatic separation at all feed rates. 5. Generally, for dry paddy threshing, the separating performance of the thresher with the additional sieve device was better at all feed rates, showing greater difference with increasing feed rates. 6. Separating losses were greater with the pneumatic than sieve separation for both the wet-and dry-threshing. 7. The overall comparison of separating performance of threshers tested with and without an additional sieve device showed that the former was more effective than the latter for the dry-material threshing. However, for the wet-paddy threshing, the separation performance with a sieve device was better than the pneumatic only when the feed rate was high.

  • PDF

전사 방법에 따른 그래핀의 물 접촉각 변화 (Water Contact Angles of Graphene Transferred by Wet and Dry Transfer Methods)

  • 윤민아;김찬;정현준;김재현;김광섭
    • Tribology and Lubricants
    • /
    • 제34권2호
    • /
    • pp.60-66
    • /
    • 2018
  • Graphene is a monolayer of carbon atoms (approximately 0.34 nm), arranged in a honeycomb network. It has been hailed as a next-generation flexible and transparent material because it has high electrical and thermal conductivities, excellent mechanical properties, as well as flexible and transparent properties. The wettability of graphene alters its adhesion or surface energy, and it is therefore an important parameter influencing its application in the fabrication of next-generation flexible and transparent electronics. Studies on the wettability of graphene are numerous and various opinions exist. However, almost all of these studies use the wet transfer method to transfer the graphene. In this study, therefore, we investigated the effect of wet and dry transfer methods on water contact angles of graphene on a substrate. The contact angles of substrates vary depending on the type of substrate. It was found that after graphene is transferred to the substrate, regardless of transfer method, the graphene/substrate contact angle increases to a value. The contact angle of graphene transferred using the dry transfer method is higher than the contact angle of graphene transferred using wet transfer methods. The wet transferred graphene is affected by the poly(methyl methacrylate) (PMMA) residue and the polar surface of substrate. The dry transferred graphene is influenced by the conformal contact between graphene and substrate.

Seasonal Changes in Energy-related Blood Metabolites and Mineral Profiles of Nguni and Crossbred Cattle on Communal Rangelands in the Eastern Cape, South Africa

  • Mapiye, C.;Chimonyo, M.;Dzama, K.;Marufu, M.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제23권6호
    • /
    • pp.708-718
    • /
    • 2010
  • The objective of the current study was to determine seasonal changes in glucose, cholesterol, non-esterified fatty acids (NEFA), serum inorganic phosphorous (SIP), calcium, magnesium and iron concentrations in Nguni and crossbred cattle on the sweet and sour rangelands of the Eastern Cape Province of South Africa. Body weights, body condition scores (BCS) and serum concentrations of energy-related metabolites and mineral profiles were determined in late cool-dry, hot-dry, hot-wet, post-rainy and early cool-dry seasons in 100 cattle raised on communal rangelands from August 2007 to May 2008. Nguni cattle had lower (p<0.05) and higher (p<0.05) serum concentrations of glucose in the hot-wet and post-rainy seasons, respectively, compared to crossbreds in the same seasons. Serum cholesterol and NEFA concentrations in Nguni were lower (p<0.05) than in the crossbreds. Nguni and crossbred cattle had higher (p<0.05) serum NEFA concentrations on the sweet rangeland during the late cool-dry season than on sour rangeland. Nguni cattle had higher (p<0.05) SIP concentration in the hot-wet season than the crossbreds. Generally, both breeds had lowest SIP concentration during the hot-wet season on the sour rangeland. The lowest magnesium and highest iron concentrations were observed in the hot-wet and post-rainy seasons, respectively, compared to other seasons. Cattle on the sour rangeland had lower (p<0.05) iron concentrations than those on the sweet rangeland. It was concluded that Nguni cattle had lower cholesterol and NEFA, and higher SIP concentrations in the hot-wet season than crossbreds and energy deficits mostly occurred during the late cool-dry season on the sweet rangeland.

의영 전의이씨 출토복식의 세척방법에 관한 연구 (A Study on the Cleaning Method of Excavated Textiles)

  • 박윤미;황은경;정복남
    • 복식문화연구
    • /
    • 제11권6호
    • /
    • pp.956-966
    • /
    • 2003
  • The purpose of study is to find out a suitable cleaning method for excavated textiles of Jeon-ui Lee(1570∼1647). The textiles were excavated from her tomb in 1997, and her descendents put them in a box without any treatment and kept them in the warehouse since then. We used two kinds of silk as samples, non-dyed and dyed textile. The experiment was performed by 8 kinds of wet cleaning and dry cleaning methods, an ultrasonic cleaner was used in the wet cleaning, decane and perchloroethylene were used as solvents in the dry cleaning. The use of the ultrasonic cleaner in the wet cleaning method did not show any damage to the fibers of the textiles and it not only cleaned well but also was safe for the fugitive dyes. It resulted in more effective cleaning when the detergent was used together. Therefore, it is effective to use the ultrasonic cleaning on the delicate historical textiles and helpful to the operator's safety and environment.

  • PDF

건물 공조용 냉수 코일의 열 설계 (Thermal Design of a Cooling Coil for Building Air Conditioning)

  • 김내현;변호원
    • 한국산학기술학회논문지
    • /
    • 제16권10호
    • /
    • pp.6445-6452
    • /
    • 2015
  • 건물용 공기조화기의 냉수 코일은 작동조건에 따라 건표면, 습표면 또는 부분적인 습표면이 형성된다. 따라서 냉수코일을 적절히 설계하기 위해서는 건표면과 습표면, 그리고 부분적 습표면에 대한 열전달 해석이 필요하다. 본 연구에서는 미소체적에 대한 해석을 통하여 냉수코일의 성능을 계산하는 미소체적 모델을 제시하였다. 해석 모델의 예측치를 냉수코일 실험결과와 비교한 결과 미소 체적 모델은 공기측 전열량을 10.1% 이내에서 예측하고 공기측 압력손실을 11.1%, 현열비도 5.7%내로 예측하였다. 해석 모델을 활용하여 물측 회로의 변화가 냉수코일의 성능에 미치는 영향을 검토하였다.

STUDY ON THE DEVELOPMENT OF A TECHNIQUE FOR PRESERVING STRAW UNDER WET CONDITION IN BANGLADESH

  • Chowdhury, S.A.;Huque, K.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제9권1호
    • /
    • pp.91-99
    • /
    • 1996
  • About 7.7 million tons of straw dry matter are being rotten during the monsoon. The objective of this trial was to develop a technique to preserve straw under wet condition. To simulate the moisture content of wet straw, a dry straw was deeped overnight in water. After draining the excess water, the wet straw(668 g moisture $kg^{-1}$) was divided into twenty fractions and preserved with 0, 30, 50 ro 70 g urea $kg^{-1}$ dry matter for either of 30, 60, 90, 120 or 180 days in sealed plastic container. Considering the colour, smell, fungal infestation and pH, the wert straw was preserved excellently up to 180 days when 50 or 70 g of urea per kg DM was used. Urea preservation increased the crude protein contents of straw by 3.6 to 6.4 times (174 to $364g{\cdot}kg^{-1}$) over that of the dry straw ($48g{\cdot}kg^{-1}$). Although the NDF content of straw was not effected by the level of urea or by the length of the preservation period, but the ADF content increased (p > 0.05) by 0.086 to $0.889g{\cdot}kg^{-1}$ straw DM for each g increase in the urea level. At 48 hours, the DM degradability of dry straw was $350g{\cdot}kg^{-1}$, which increased to $633g{\cdot}kg^{-1}$ when preserved with 50 g urea $kg^{-1}$ for 180 days. For the same straw, both the rate(0.0388 vs. 0.0136 fraction $h^{-1}$), the extent(717 vs. $631g{\cdot}kg^{-1}$) of straw degradation and the estimated ME(9.55 vs. $6.51MJ{\cdot}kg^{-1}$ straw DM) were higher in the preserved than the dry straw.

Species diversity, some biological aspects of fishes and water quality of Terie River, Beshilo Basin, Ethiopia

  • Assefa Tessema Tecklie
    • Fisheries and Aquatic Sciences
    • /
    • 제27권6호
    • /
    • pp.356-365
    • /
    • 2024
  • The study was conducted in the Terie River between January and April 2022. The objectives of the study were to assess the fish species composition, determine the length-weight relationship and condition factor and assess the water quality of the river using international water quality guideline for aquatic life. Gillnets with different mesh sizes, 4, 6, 8 and 10 cm were used to collect fish specimens in both dry and wet seasons. Immediately after capture, the total length (TL) and total weight (TW) of each individual were measured in centimeters and grams, respectively, and their relationship was determined using the power function. The physicochemical water quality parameters were analyzed using standard procedures and wagtech portable water quality Kits and Secchi Disk apparatus. A total of 667 fish specimens were collected from the Terie River, 410 and 257 in dry and wet seasons respectively. A total of six fish species, Oreochromis niloticus, Labeobarbus intermedius, Labeobarbus nedgia, Labeobarbus beso, Clarias gariepinus, and Ramius loti were recorded. For length-weight relationship and condition factor analysis, more abundant fish species (O. niloticus and L. intermedius) which were found in both seasons were selected. The length and weight relationship of L. intermedius were TW = 0.0073TL3.04 in dry and TW = 0.0337TL2.59 in we season indicated isometric and negative allometric growth respectively. While O. niloticus showed negative allometric growth, TW = 0.096TL2.44 and TW = 0.0335 TL2.76 in dry and wet seasons, respectively. The mean Fulton condition factor (FCF) of L. intermidus were 0.85 ± 0.03 and 0.94 ± 0.25 in dry and wet seasons, respectively. The FCF of O. niloticus was 1.70 ± 0.13 and 1.73 ± 0.12 in dry and wet seasons respectively. Except for ammonia, the physicochemical water quality parameters were with the permissible limit for aquatic life and are suitable for fishes Terie River. The river has commercially important fish specimens that could be used for food security and livelihood improvement. However, there is very limited fishing activity in the river due to less awareness on the value of fishes. Therefore, sustainable fishery development should be done in the river.

Measurement of Interface Trapped Charge Densities $(D_{it})$ in 6H-SiC MOS Capacitors

  • Lee Jang Hee;Na Keeyeol;Kim Kwang-Ho;Lee Hyung Gyoo;Kim Yeong-Seuk
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
    • /
    • pp.343-347
    • /
    • 2004
  • High oxidation temperature of SiC shows a tendency of carbide formation at the interface which results in poor MOSFET transfer characteristics. Thus we developed oxidation processes in order to get low interface charge densities. N-type 6H-SiC MOS capacitors were fabricated by different oxidation processes: dry, wet, and dry­reoxidation. Gate oxidation and Ar anneal temperature was $1150^{\circ}C.$ Ar annealing was performed after gate oxidation for 30 minutes. Dry-reoxidation condition was $950^{\circ}C,$ H2O ambient for 2 hours. Gate oxide thickness of dry, wet and dry-reoxidation samples were 38.0 nm, 38.7 nm, 38.5 nm, respectively. Mo was adopted for gate electrode. To investigate quality of these gate oxide films, high frequency C- V measurement, gate oxide leakage current, and interface trapped charge densities (Dit) were measured. The interface trapped charge densities (Dit) measured by conductance method was about $4\times10^{10}[cm^{-1}eV^{-1}]$ for dry and wet oxidation, the lowest ever reported, and $1\times10^{11}[cm^{-1}eV^{-1}]$ for dry-reoxidation

  • PDF

PF열교환기의 습표면 성능시험 (Wet Surface Performance Test of PF Heat Exchanger)

  • 조진표;김내현;최국광
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집B
    • /
    • pp.314-320
    • /
    • 2000
  • In this study, the wet surface heat transfer coefficients and friction factors of PF heat exchangers are presented. Two sample with different fin pitch(1.25mm, 1.5mm) were tested. Tests were conducted in a open loop wind tunnel. The wet surface heat transfer coefficient was reduced following the procedure given in ARI 410-81. Results showed that the heat transfer coefficients of the heat exchanger with 1.5mm fin pitch were approximately the same as those with 1.25mm fin pitch, except at low reynolds number(Re<100), where the heat transfer coefficients of 1.5mm fin pitch were slighly higher than those with 1.25mm fin pitch. The friction factors of the 1.25mm fin pitch, however was 120 % to 160 % higher than those of the 1.5mm fin pitch. The wet surface heat transfer coefficients were lower than those of the dry surface. The wet surface friction factors, however, were higher than those of the dry surface.

  • PDF