• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.51-56
• /
• 2006

Biases embedded in numerical weather precipitation forecasts by the RDAPS model was determined, quantified and corrected. The ultimate objective is to eventually enhance the reliability of reservoir operation by Korean Water Resources Corporation (KOWACO), which is based on precipitation-driven forecasts of stream flow. Statistical post-processing, so called MOS (Model Output Statistics) was applied to RDAPS to improve their performance. The Artificial Neural Nwetwork (ANN) model was applied for 4 cases of 'Probability of Precipitation (PoP) for wet and dry season' and 'Quantitative Precipitation Forecasts (QPF) for wet and dry season'. The reduction on the large systematic bias was especially remarkable. The performance of both networks may be improved by retraining, probably every month. In addition, it is expected that performance of the networks will improve once atmospheric profile data are incorporated in the analysis. The key to the optimal performance of ANN is to have a large data set relevant to the predictand variable. The more complex the process to be modeled by the ANN, the larger the data set needs to be.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.368-371
• /
• 2004

It analyzes the quality of the fine aggregate which is reproduced through a dry production process with cyclone and a wet production process. The conclusions of the study are as follows. 1. The recycled fine aggregate through the dry production process with cyclone shows the low rate of absorption and impurity content after the cyclone process. It shows that its density is 2.37, absorption rate is 4.8 and stability is $5.1\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade. 2. The recycled fine aggregate through the wet production process shows the low rate of absorption and foreign substance content after the process of wash and dehydration. It shows that its density is 2.40, absorption rate is 3.12 and stability is $3.2\%$ and less. Therefore, it satisfies the standards of KS F 2573(recycled aggregate for concrete) as the first grade.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.471-473
• /
• 2006

An object of the present study is to provide a hollow fiber membrane humidifier capable of improving the humidification efficiency while lowering the pressure loss, and is suitably usable for PEMFC(Polymer Electrolyte Membrane Fuel Cell). The performance of PEMFC is decisively dependent on the humidity of the electrolyte membrane(fluorinated membrane) and a humidifier plays an important role in moisturizing electrolyte membrane. Especially this humidifier is adaptable for lower price to promote the commercialization of fuel cell vehicles and is passive type to be power free and to be volumetrically optimized. In this research, we propose the substitutes for the expensive fluorinated materials and the optimum dry-jet wet spinning conditions of hollow fiber membrane to get the fuel cell humidifier. In addition to that we established the standard method of evaluating the moisturizing performance of the humidifier of various materials.

• Water Engineering Research
• /
• v.5 no.1
• /
• pp.1-16
• /
• 2004

The purpose of this study is to understand the characteristics of hourly PET(Potential Evapo Transpiration) variation estimated using Penman ET model. The estimated PET using Penman model was compared with measured ET. For this study, two subwatersheds were selected, and fluxes, meteorological data and soil moisture data were measured during the summer and winter days. During the winter days, the aerodynamic term of Penman ET is much greater than that of energy term of Penman ET for dry soil condition. The opposite phenomena appeared fer wet soil condition. During the summer days, energy term is much more important factor for ET estimation compared with aerodynamic term regardless of soil moisture condition. Penman ET, measured ET, and energy term show the similar hourly variation pattern mainly because the influence of net radiation on the estimation of Penman ET is much more significant compared with other variables. Even though there are much more soil moisture in the soil during the wet days, the estimated hourly ET from Penman model and measured hourly ET have smaller values compared with those of dry days, indicating the effect of cloudy weather condition.

• Journal of Powder Materials
• /
• v.21 no.2
• /
• pp.142-146
• /
• 2014

Fundamental experiences have been studied for development of pre-treatment process of Sn by-products such as solders. Dry and wet separation/recovery processes were considered by the differences of physical properties. The by-products, which are analyzed by solder metal and oxides. The metal and oxide were simply separated by dry ball-milling process for 12 hours, after that recovery metal powder might be reusable as lead or lead-free solders. In terms of wet separation process, samples were dissolved in $HNO_3+H_2O_2$ and the precipitation were analyzed by $SnO_2$. Overall efficiency of recovery might be increasing via developing simple pre-treatment process.

• The Korean Journal of Ceramics
• /
• v.7 no.2
• /
• pp.93-96
• /
• 2001

The Y- or Yb-doped SrZrO$_3$ proton conductors were fabricated using the powders prepared by the self-propagating high-temperature synthesis (SHS). The electrical conductivity was evaluated from an a.c. impedance measurements. The conductivity of SrZr$_{0.92}$Yb$_{0.08}$O$_{3-\delta}$ was 1.8$\times$10$^{-3}$ Scm$^{-1}$ at $900^{\circ}C$ in dry air atmosphere and its activation energy was 0.50 eV. The conductivity in wet air was larger, compared with the dry air, and the activaton energy of SrZr$_{0.92}$Yb$_{0.08}$O$_{3-\delta}$ in wet air was 0.40 eV.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.953-955
• /
• 2006

In this work we compared different sources of composition of Ag powders obtained by dry and wet process on the photolithographic patterning of PDP electrode and resistance of sintered Ag electrode. It was found that 90 : 10 wt% ratio of Ag powder made by dry and wet processes gave optimum result both on the PDP electrode pattern and resistance of PDP electrode after sintering.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.234-238
• /
• 1999

This study suggests the design of the functionally gradient composite, [0/90/0/core]$_s$ cross-ply laminate, to prevent stress concentration induced from the difference of rigidity between the bone and the artificial hip joint and to reinforce the wear property of the surface and the expectation of their mechanical properties. First, the four-point bending test is done about wet bones and dry bones to know the mechanical properties of the cortical bones. In result, the wet bone shows the viscoelastic behavior and the dry bone shows the elastic behavior. Moreover, we expect the properties of the proposed gradient composites as a function of carbon fiber volume fraction in each layer to apply Halpin-Tsai equation, CLPT(classical laminate plate theory), and Bernoulli beam theory etc. and decide the thickness ratio of each lamina in order to match Young's modulus of the anisotropic cortical bone with the proposed gradient composites.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.8-15
• /
• 2004

Since the vehicle is regarded as the third living space, the comfortable conditions are required in the passenger compartment. For this reason, customers are concerned about the filtering performances and the importance of filter media has been greatly placed. Therefore the dust holding capacity, the efficiency of these filter media (dry paper, wet paper, non-woven) and the configuration of air filter for vehicle were measured in this study. The following results were obtained on the basis of air filter test. It shows that the thickness and poresize of filter media should be lower for the higher efficiency. The measurement result shows that the performance of round shape filters are higher than the square shape filters. The dust holding capacity of the wet paper and the non-woven paper is higher than the dry paper. As a result, this research can provide an important design parameter and product guidance of the intake air filter for vehicular engine.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.1
• /
• pp.21-28
• /
• 2002

Noodle texture parameters of Korean style wet and dry noodles and relationships between noodle quality and flour characteristics were evaluated for two years, 1997 and 1998, and at two locations, Suwon and Deokso, using Korean winter wheat cultivars and lines. No significant difference for chewiness was found between cultivars over locations. Noodles made from flours from 1997 showed significantly higher chewiness than those from 1998. Chewiness of cooked noodles showed positively significant correlations with protein content and SDS sedimentation volume and negatively significant correlations with starch peak viscosity and flour swelling volume. Korean winter wheat cultivars, except for Gobunmil, Keumkangmil Tapdongmil, Suwon 265 and Suwon 280, showed chewiness of cooked noodles similar to commercial flours used for noodle making in Korea and Japan.