• Journal of Korea Water Resources Association
• /
• v.33 no.1
• /
• pp.99-110
• /
• 2000

In this study we proposed a simple method for generating multi-site daily rainfall based on the 1-order Markov chain and considering the spatial correlation. The occurrence of rainfall is simulated by a simple 1st-order Markov chain and its intensity to be chosen randomly from the observed data. The spatial correlation between sites could be conserved as the rainfall intensity at each site is to be chosen consistently with the target site in time through generation. It is found that the generated daily rainfall data reproduce genera] characteristics of the observed data such as average, standard deviation, average number of wet and dry days, but the clustering level in time is somewhat loosened. Thus, the lag-I correlation coefficient of the generated data gave smaller value than the observed, also the average lengths of wet run and dry run and the wet-to-wet and dry-to-dry probabilities were a bit less than the observed. This drawback seems to be overcome somewhat by choosing a proper site representing overall basin characteristics or by use of more detailed states of rainfall occurrence.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.134-140
• /
• 2015

This study was carried out to evaluate whether EVAc, acryl latex and biobinder could substitute the part of SB latex for pre-coating color formula or not. Different coating colors prepared through the substitution of 30% SB latex with EVAc, acryl latex, and biobinder were applied for pre-coating layer. 100% SB latex is used as a binder for top coating color. The optical properties, gloss, roughness, stiffness, dry- and wet-pick strength were measured. There were no significant differences in the brightness, whiteness, opacity, roughness, ink set-off and gloss of paper coated with 5 different coating colors. However the stiffness, dry- and wet-pick strength were somewhat lower than those of conventional coating color which 100% SB latex was used as a binder. Although the part of SB latex could be substituted with EVAc, acryl latex and biobinder without sacrificing the qualities of coated paper. Further researches on the improvement of stiffness, dry- and wet-pick strength, and the optimization of rheology of coating color in order to improve the qualities of coated paper are strongly recommended.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.2
• /
• pp.35-43
• /
• 1984

This study was carried out to investigate the block shear strength of the 2ply laminated wood composed of Pinus thunbergii with ureaformaldehyde resin as adhesives according to pressure (6, 9, 12, 15kg/$cm^2$), pressing time(5, 10, 20, 30 hrs.), amount of spread(54, 108, 217, 324g/$cm^2$), hardener(10, 20, 30, 40% of 10% $NH_4CL$ on resin) and extender(0, 5, 10, 15% wheat flour on resin), and the bending strength and bending young's modulus of laminated beam according to the number of ply. The results were summarized as follows; 1. According to pressing pressure with amount of spread 217g/$cm^2$ both dry and wet shear strength of laminated wood showed the highest in 15kg/$cm^2$, and hot-cold soaking treatment showed the highest in 9kg/$cm^2$, while all shear strength of dry, wet and hot-cold soaked laminated wood have been reduced with the increasing of pressing time. 2. According to amount of spread, adhesion strength with the dry, wet and hot-cold soaking treatments revealed the highest in 217g/$cm^2$ and have been reduced under or over 217g/$cm^2$ of spread. 3. According to addition of hardener and extender, all shear strength of laminated block with the dry, wet and hot-cold soaking treatments have been reduced in increasing of addition amount of hardener and extender. The bending strength of beam according to the number of ply showed the highest in 2ply laminated wood and horizontal loading beam to glue line had the higher in strength than the vertical loading.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.392-398
• /
• 1988

Gelatinized rice flours were prepared by drum drying at different moisture contents of slurry made from dry milled and wet milled rice flours. Milled rice samples were prepared from the Chuchung and the Samgang varieties. Degree of gelatinization of drum-dried rice flours revealed over 92% at 60% moisture content of wet milled rice flours and 80% moisture content of dry milled ones. With regards to amylogram and rheological properties, drum-dried rice flours prepared from wet milled raw materials showed higher viscosity than from dry milled ones. Increasing water contents in the slurry increased water absorption index(WAI) and decreased water solubility index(WSI). Hunter's color values of drum-dried rice flour at high moisture contents showed higher L values and lower b values. For the preparation of gelatinized rice flours by drum drying process, the higher water content caused more gelatinized network structure of rice starch in scanning electron micrographs. With regards to farinogram properties of dough with drum-dried rice flours and wheat flours in mixing ratio of 1 to 9 by weight, drum-dried rice flours made from wet milled raw rice flours revealed higher MTI than from dry milled ones.

• Korean journal of food and cookery science
• /
• v.26 no.6
• /
• pp.727-736
• /
• 2010

The purpose of this research was to compare the physicochemical compositions and morphological properties of five varieties of rice flours (RR, RGD, RSGD, RWDG, RWGD). RR was raw milled rice without washing, RGD was raw rice flour without soaking, RSGD was raw milled rice flour with 0 hr of soaking, RWDG was raw rice flour with 8 hr of soaking and grinding after drying, and RWGD was raw rice flour with 8hr of soaking and drying after grinding. The protein and lipid contents of wet milling rice flour (RSGD, RWDG, RWGD) were significantly lower than those of dry milling rice flour (RR, RGD). L and a values were significantly increased in wet milling rice flour, and b value was significantly increased in dry milling rice flour. Scanning electron microscopy (SEM) showed that RWDG and RWGD were distributed as separated fine particles in rice flours. The WBC of RWDG and RWGD were higher than those of other rice flours. Solubility was significantly increased according to the temperature, and swelling power of RWDG was higher than that of other rice flours at 50 and $60^{\circ}C$. Using RVA, the initial pasting temperature and setback of RWDG were lower and the peak viscosities of RSGD and RWDG were higher than those of other rice flours. Using a mixograph, peak times were not significantly different among the groups, wheras peak heights were significantly decreased in RSGD, RWDG, and RWGD. The peak width of RWGD was lower than those of other rice flours. Based on these findings, RWDG flour was less damaged, and had a lower setback and pasting temperature, which makes it an appropriate rice flour for commercial mass production.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.5
• /
• pp.414-420
• /
• 2010

The effect of polymeric diphenyl methane-4,4-diisocyanate (pMDI) or 1,6-hexamethylene diisocyanate (HDI) in the UMF resin was discussed for improvement of the dry and wet shear strengths of plywood manufactured from high moisture content veneers. The curing behavior of UMF resin by pMDI or HDI content was examined by DSC and TGA, and its adhesion performance was evaluated by dry and wet shear strength tests of plywood. With the increase of pMDI content in the UMF resin, the curing temperature, reaction enthalpy (${\Delta}H$), and thermal stability consistently increased. With the increase of HDI content in the UMF resin, however, the curing temperature and reaction enthalpy (${\Delta}H$) decreased consistently and the thermal stability slightly increased in the range of 200 to $400^{\circ}C$ but decreased beyond $400^{\circ}C$. Also, the dry tensile shear strength increased up to the pMDI content of 5% and then decreased with its further addition but the wet tensile shear strength showed slight tendency to increase with the increase of pMDI content in the UMF resin. As the HDI content increased, however, the dry and wet tensile shear strengths of plywood consistently increased.

• Journal of Ecology and Environment
• /
• v.43 no.4
• /
• pp.376-384
• /
• 2019

Background: Nutrient release during litter decomposition was investigated in Vitex doniana, Terminalia avecinioides, Sarcocephallus latifolius, and Parinari curatellifolius in Makurdi, Benue State Nigeria (January 10 to March 10 and from June 10 to August 10, 2016). Leaf decomposition was measured as loss in mass of litter over time using the decay model W_t/W₀ = e-^{kd t}, while $Kd=-{\frac{1}{t}}In({\frac{Wt}{W0}})$ was used to evaluate decomposition rate. Time taken for half of litter to decompose was measured using T₅₀ = ln ²/k; while nutrient accumulation index was evaluated as $NAI=(\frac{{\omega}t\;Xt}{{\omega}oXo})$. Results: Average mass of litter remaining after exposure ranged from 96.15 g, (V. doniana) to 78.11 g, (S. lafolius) in dry (November to March) and wet (April to October) seasons. Decomposition rate was averagely faster in the wet season (0.0030) than in the dry season (0.0022) with P. curatellifolius (0.0028) and T. avecinioides (0.0039) having the fastest decomposition rates in dry and wet seasons. Mean residence time (days) ranged from 929 to 356, while the time (days) for half the original mass to decompose ranged from 622 to 201 (dry and wet seasons). ANOVA revealed highly significant differences (p < 0.01) in decomposition rates and exposure time (days) and a significant interaction (p < 0.05) between species and exposure time in both seasons. Conclusion: Slow decomposition in the plant leaves implied carbon retention in the ecosystem and slow release of CO₂ back to the atmosphere, while nitrogen was mineralized in both seasons. The plants therefore showed effectiveness in nutrient cycling and support productivity in the ecosystem.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.444-451
• /
• 2013

This paper surveys the physical properties of aramid and aramid/nylon hybrid air-jet textured yarns(ATY) for protective garments according to wet and dry texturing conditions. Aramid and nylon filaments were used to make two kinds of para-aramid ATY and four kinds of aramid/nylon hybrid ATY with dry and wet treatments. The analyzed physical properties of six specimens (made on the ATY machine) are as follows. The tenacity and initial modulus of aramid and aramid/nylon hybrid ATY decreased with the wetting and breaking strain; however, the yarn linear density of aramid and hybrid ATY increased with wetting treatment. The dry and wet thermal shrinkage of the hybrid ATY increased with wetting. The stability of aramid and hybrid ATY also increased with wetting. The physical properties of core/effect type hybrid ATY showed significantly more change than the core type hybrid ATY and the physical properties of nylon/aramid core/effect hybrid ATY showed significantly more change than the of aramid/nylon core/effect hybrid ATY. A higher bulky and breaking strain of hybrid ATY require ATY processing conditions of nylon on the core part with wetting and aramid on the effect part. ATY processing conditions for nylon and aramid on the core part with wetting are required for a higher tenacity and modulus. ATY processing conditions of nylon and aramid on the core with no wetting are required for a low thermal shrinkage.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.4
• /
• pp.344-354
• /
• 2014

Activated charcoal supported nickel molybdenum carbide (carburized Ni-Mo/AC) catalysts were prepared by wet-impregnation followed by temperature-programmed carburization using 20% $CH_4/H_2$ gas. The effects of pH and initial Ni/Mo mole ratio during wet-impregnation step on the characteristics of the carburized Ni-Mo/AC catalysts were investigated using ICP, XRD, XPS, BET and $CO_2$-TPD techniques, and correlated with the catalytic activity of the carburized Ni-Mo/AC in methane dry reforming reaction. Comparison of the results of methane dry reforming reaction kinetics with the results of characterization of the carburized Ni-Mo/AC catalyst showed that the catalytic activity in methane dry reforming reaction was higher at higher initial Ni/Mo mole ratio or at lower pH(3~natural value). This phenomenon was related to the crystal size of metallic Ni in the carburized Ni-Mo/AC catalyst.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.696-706
• /
• 2023

Consequences of an anticipated Beyond Design Basis Accident (BDBA) Long-Term Station Blackout (LTSBO) event with complete loss of grid power in the VVER-1200 reactor of Rooppur Nuclear Power Plant (NPP) of Unit-1 are assessed using the RASCAL 4.3 code. This study estimated the released radionuclides, received public radiological dose, and ground surface concentration considering 3 accident scenarios of International Nuclear and Radiological Event Scale (INES) level 7 and two meteorological conditions. Atmospheric transport, dispersion, and deposition processes of released radionuclides are simulated using a straight-line trajectory Gaussian plume model for short distances and a Gaussian puff model for long distances. Total Effective Dose Equivalent (TEDE) to the public within 40 km and radionuclides contribution for three-dose pathways of inhalation, cloudshine, and groundshine owing to airborne releases are evaluated considering with and without passive safety Emergency Core Cooling System (ECCS) in dry (winter) and wet (monsoon) seasons. Source term and their release rates are varied with the functional duration of passive safety ECCS. In three accident scenarios, the TEDE of 10 mSv and above are confined to 8 km and 2 km for the wet and dry seasons, respectively in the downwind direction. The groundshine dose is the most dominating in the wet season while the inhalation dose is in the dry season. Total received doses and surface concentration in the wet season near the plant are higher than those in the dry season due to the deposition effect of rain on the radioactive substances.