• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.86-93
• /
• 2007

In recent tests using tracer have been frequently conducted by fluorescent tracers. In this study, granular activated charcoal (GAC) as a detector for the fluorescent tracers (rhodamine WT and uranine) was investigated through laboratory and field tests. In the laboratory tests, tracer concentrations of rhodamine WT and uranine determined by the GAC were slightly different from those of standard solutions but they were excellent in linearity. Results show that GAC is excellent as tracer detector when concentration of the fluorescent tracers is greater than 10 & micro; g/L whileas no obvious differences in mixed solutions of the two tracers due to interferences. Compared to conventional methods of water sampling, field results shows a high potential of GAC as a tracer in the field. Our results also show that wet analysis is better for the lower concentrations of tracers whileas dry analysis is good for high concentrations of tracers. This study demonstrates that fluorescent tracer detection using the GAC is very useful and economical for a hydraulic connection between target areas and very longer period of the tracer test.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.24-30
• /
• 2010

This study utilises repeated numerical tests to understand the effects of variable near-surface conditions on time-lapse seismic surveys. The numerical tests were aimed at reproducing the significant scattering observed in field experiments conducted at the Naylor site in the Otway Basin for the purpose of $CO_2$ sequestration. In particular, the variation of elastic properties of both the top soil and the deeper rugose clay/limestone interface as a function of varying water saturation were investigated. Such tests simulate the measurements conducted in dry and wet seasons and to evaluate the contribution of these seasonal variations to seismic measurements in terms of non-repeatability. Full elastic pre-stack modelling experiments were carried out to quantify these effects and evaluate their individual contributions. The results show that the relatively simple scattering effects of the corrugated near-surface clay/limestone interface can have a profound effect on time-lapse surveys. The experiments also show that the changes in top soil saturation could potentially affect seismic signature even more than the corrugated deeper surface. Overall agreement between numerically predicted and in situ measured normalised root-mean-square (NRMS) differences between repeated (time-lapse) 2D seismic surveys warrant further investigation. Future field studies will include in situ measurements of the elastic properties of the weathered zone through the use of 'micro Vertical Seismic Profiling (VSP)' arrays and very dense refraction surveys. The results of this work may impact on other areas not associated with $CO_2$ sequestration, such as imaging oil production over areas where producing fields suffer from a karstic topography, such as in the Middle East and Australia.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.660-667
• /
• 2010

In this research polyimide, Matrimid 5218, hollow fiber membrane was used to recover sulfur hexafluoride($SF_6$) which is one of the six greenhouse gases from $N_2/SF_6$ mixture gas. Fibers were spun from using dry-wet phase inversion method. The module was manufactured by fabricating fibers after surface coating with silicone elastomer. The scanning electron microscopy(SEM) studies showed that the produced fibers typically had an asymmetric structure; a dense top layer supported by a sponge-like substructure. The developed module had a permeance of 0.78-1.36 GPU for $N_2$ with $N_2/SF_6$ selectivity of 2.44-5.08 at various pressure and temperature. For recovery of $SF_6$, a membrane module and 10 vol.% $SF_6$ from $N_2/SF_6$ mixture gas was used. The effects of various operating condition such as pressure, temperature, and retentate side flow rate were tested. When pressure and temperature were increased and retentate flow rate was decreased, the $SF_6$ purity in recovered gas was increased up to 37.5 vol.% with decreasing recovery ratio. When retentate flow rate was increased pressure and temperature was decreased, the $SF_6$ recovery ratio in retentate side was increased up to 89% with decreasing the $SF_6$ purity in retentate side.

• The Korean Journal of Malacology
• /
• v.32 no.3
• /
• pp.189-195
• /
• 2016

The growth of manila clam Ruditapes philippinarum inhabiting culturing ground was studied in west coast Gomso tidal flat of Korea, from August 2000 to July 2001. The density of the clam was the highest in November 2000, showing a monotonic decrease afterwards over the study period. Mean density was $1,224ind./m^2$ during the study period. Size frequencies of the clam showed a unimodal distribution, and its mode increased with shell growth over time. Although the growth of shell length of manila clam was monotonic, the growth rates decreased between July 2001 and February 2002 and increased from March 2002. The biomass of the clam also increased with time, in which the increments becoming larger since March 2002. The clam shell length had linear relationship to shell height, and had logarithmic relationship to total weight, meat wet weight, dry meat weight, and AFDW. Condition index of the clam increased continuously until April, decreasing afterwards in 2001. The pattern was similar in 2002. Based on fluctuations in condition index, the spawning time of manila clam in Gomso tidal flat is inferred to be between May and October. These results suggested that optimal harvests can be made before summer season when growth decreased and mass mortality occurred, after 24 months of seed shell release.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.329-337
• /
• 2017

In USA and UK, the standards of both reverberation time and background noise level have been established for the appropriate aural environment in classrooms. In order to realize this, guidelines for architectural planning and interior finishing have been also suggested. However, in Korea, there has hardly been any guidelines for satisfying background noise criteria and investigation about sound insulation performance of current walls of classrooms. The present study investigates the structure of outer wall and walls between classrooms of two middle schools in order to analyze the sound insulation performance against both exterior and interior noises. Acoustic parameters including transmission loss, standardized sound level difference, and signal to noise ratio have been measured and analyzed for sound insulation performance of walls and flanking noises. As a result, concerning the walls in between classrooms, it was found that walls of dry construction have greater sound insulation performance rather than the walls of wet construction especially in mid and high frequency bands. Also, It was revealed that thermopane, insulated pair glass, of outer walls, has greater sound insulation performance than the double window consisted of two single pane glass. Regarding flanking noises, the standards were exceeded when all windows, or windows and doors front onto corridor were opened. It denotes that students could be disturbed with the sound transmission by the interior noises.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.227-232
• /
• 2006

This article presents the results of experimental study that investigates the effect of filler and shrinkage reducing agent influencing on the strength properties of MMA-modified polymer paste that was produced to develop the surface-repair and coating materials of the concrete structures. Results show that the flexural and compressive strengths of the polymer paste increased 29 and 27%, respectively, when the aluminum hydroxide completely replaced the calcium carbonate as the filler Furthermore, when the shrinkage reducing agent was used 30%, both strengths decreased about 29% comparing to when the agent was not used. As in the cases of flexural and compressive strengths, the adhesive strength increased as the content of aluminum hydroxide as the filler increased, and it decreased as the content of shrinkage reducing agent increased. The adhesive strength with a dry concrete substrate turned out to be $30{\sim}40%$ higher than that with a wet concrete substrate.

• Journal of Environmental Science International
• /
• v.12 no.4
• /
• pp.461-467
• /
• 2003

This study was conducted to provide the basic information to know reasonable method f3r the removal and treatment of municipal solid wastes(MSWs). MSWs four different sources(apartment residence, commerce, office/industry) in Daegu city were collected, and bulk density, physical composition, moisture, combustible, ash, elements and heating values were investigated. The values of bulk density were at range of 0.30∼0.41ton/m$^3$. The percentages of foods, papers, vinyls/plastics, textiles, rubbers/leathers, metals and glasses/ceramics of wet muncipal solid wastes from three sources except office/industry were at range of 27.3∼46.4%, 21.2∼38.4%, 10.3∼11.9%, 3.8∼5.2%, 0.5∼1.7%, 6.9∼8.7% and 1.9∼2.6% respectively. The percentages of papers, foods, vinyls/plastics, textiles, rubbers/leathers, metals and glasses/ceramics of dry muncipal solid wastes from three sources except office/industry were at range of 21.1∼40.4%, 14.2∼30.1%, 15.2∼17.8%, 4.0∼6.0%, 0.9∼2.8%, 12.2∼14.1% and 3.1∼3.7％ respectively. The moisture contents of foods, woods, textiles and papers in wastes were at range of 65.7∼76.2%, 34.6∼50.0%, 22.2∼44.8 and 30.6∼44.4% respectively. The carbon contents of vinyls/plastics, rubbers/leathers, textiles, woods, papers and foods in wastes were at range of 75.88∼79.87%, 58.24∼70.74%, 45.23∼51.63%, 42.29∼45.58%, 40.19∼48.4% and 25.86∼36.25% respectively. The low heating values of foods, papers, woods, textiles, rubbers/leathers and vinyls/plastics by Dulong's law were at range of 178∼1,353kcal/kg, 770∼1,660kcal/kg, 995∼1,629kcal/kg, 2,133∼2,432kca1/kg, 4,200∼7,275 kcal/kg and 6,384∼8,722kcal/kg respectively, and the high heating values of them were at range of 782∼2,056 kcal/kg, 2,459∼3,314kca1/kg, 3,056∼3,592kcal/kg, 4,381∼5,087kca1/kg, 5,005∼8,066kca1/kg and 10,032∼10,739 kcal/kg respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.224-230
• /
• 2001

The characteristics of $NO/N_2O$ annealed reoxidized nitrided oxide being studied as super thin gate oxide and gate dielectric layers of Non-Volatile Semiconductor Memory (NVSM) were investigated by Dynamic Secondary Ion Mass Spectrometry (D-SIMS), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS), and Auger Electron Spectroscopy (AES). The specimen was annealed by $NO/N_2O$ after initial oxide process and then rcoxidized for nitrogen redistribution in nitrided oxide. Out-diffusion of incorporated nitrogen during the wet oxidation in reoxidation process took place more strongly than that of the dry oxidation. It seems to indicate that hydrogen plays a role in breaking the Si N bonds. As reoxidation proceeds, incorporated nitrogen of $NO/N_2O$ annealed nitrided oxide is obsen-ed to diffuse toward the surface and substrate at the same time. ToF-SIMS results show that SiON species are detected at the initialoxide interface, and Si,NO species near the new $Si_2NO$ interface that formed after reoxidation. These SiON and $Si_2NO$ species most likely to relate to the origin of the state of memory charge traps in reoxidized nitrided oxide, because nitrogen dangling bonds of SiON and silicon dangling bonds of $Si_2NO$ are contained defects associated with memory effect.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.10
• /
• pp.67-74
• /
• 2013

The objective of this study was to identify the effect of engineering properties on the resilient modulus ($M_r$) of cohesive soils as subgrade. Eight representative cohesive soils representing A-6, and A-7-6 soil types collected from road construction sites, were tested in the laboratory to determine their basic engineering properties. The laboratory tests for the engineering properties were Atterberg limits test, sieve analysis, hydrometer test, Standard Proctor compaction test, and unconfined compressive strength test. Resilient modulus test and unconfined compressive strength test were conducted on unsaturated cohesive soils at three different moisture contents (dry of optimum moisture content, optimum moisture content, and wet of optimum moisture content). The increase in moisture content considerably affected the decrease in the resilient modulus. The resilient modulus increased with an increase in maximum unconfined compressive strength, percent of clay, percent of silt and clay, liquid limit and plasticity index. The resilient modulus decreased with an increase in percent of sand.

• Preventive Nutrition and Food Science
• /
• v.17 no.4
• /
• pp.299-305
• /
• 2012

Yam has been recognized having the beneficial effects for the prevention of various diseases, such as cancer, immunity, infection and obesity etc. There is increasing consideration to supplement the antioxidant nutrients to make up the lack of the antioxidant nutrient intakes. No study has been reported for the analysis of antioxidant mineral contents and comparison to dietary recommended intake for the sense of health promotion. In our study, we analyzed the contents of antioxidant trace elements (Zn, Mn, Fe, Cu and Se) and Cr contents in cultivated Korean yam powders for evaluation of nutrient intake aspects. We collected the commercial yam powders from six different cultivated areas in the South Korea and measured antioxidant minerals (Zn, Mn, Fe, Cu and Se) and Cr contents using trace element-free plasma spectrometer (ICP) or atomic absorption spectrometer (AAS) after dry-ashing and then wet-acid digestion. The accuracy of mineral analysis method was confirmed by the mineral analysis of standard reference material. Each analyzed element contents in yam were compared to dietary reference intakes of Koreans (KDRIs). The average levels of trace elements (Zn, Mn, Fe, Cu, Se and Cr) in yam powders were 18.3, 11.9, 36.0, 3.7, 1.9 and 1.27 ${\mu}g/g$ yam powder, respectively. The intakes of Zn, Fe, Cu and Se of which KDRIs is determined, are accounted as being up to 23.8%, 55.6%, 32.5% and 236% recommended intake (RI) of KDRIs, if daily yam supplementation (50 g) of commercial instruction would be considered. The intake of Mn is about 25% adequate intake (AI) of KDRIs with the daily supplementation of yam powder. Most of mineral intakes from daily yam supplementation were with the range of non-detectable to <10% upper limit (UL) level, which is very much safe. The study results show that daily supplementation of Korean yam power is beneficial to provide the supplemental nutrient intake and also is safe, if the suggested dosage would be considered.