• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.9
• /
• pp.475-483
• /
• 2015

In Korea, a typically hot and humid summer means that air-conditioners consume a large quantity of electricity; accordingly, the simultaneous usage of an indirect evaporative cooler may reduce the sensible-heat level and save the amount of electricity that is consumed. In this study, the heat-transfer and pressure-drop characteristics of an indirect evaporative cooler made of paper/plastic film were investigated under both dry and wet conditions; for the purpose of comparison, an indirect evaporative cooler made of plastic film was also tested. Our results show that the indirect evaporative efficiencies under a wet condition are greater than those under a dry condition, and the efficiencies of the paper/plastic sample (109% to 138%) are greater than those (67% to 89%) of the plastic sample; in addition, the wet-surface, indirect evaporative efficiencies of the paper/plastic sample are 32% to 36% greater than those of the plastic sample. Further, the wet-surface pressure drops of the paper/plastic sample are 13% to 23% larger than those of the plastic sample, and this might have been caused by the surface roughness of the samples. A rigorous heat-transfer analysis revealed that, for the plastic sample, 30% to 37% of the wet channels remained dry, whereas all of the channels were wet for the paper/plastic sample.

• Speech Sciences
• /
• v.13 no.1
• /
• pp.85-94
• /
• 2006

The aim of this study was to examine the characteristics in duration and amplitude of the submental muscle activities during dry and wet swallowing. We examined the middle suprahyoid muscle activities in 32 normal adult women during three swallowing conditions, that is, dry as well as 5 mL & 10 mL water swallowings, using a surface EMG. From the results, there were significant differences in duration: the longest in dry swallowing and shortest in 5 mL water swallowing. However, the mean amplitude per msec increased as the duration decreased. This may imply motor equivalence in swallowing stating that duration and amplitude are complementary in order to achieve a given swallowing goal.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2583-2588
• /
• 2008

In the present experimental study, the regime limit and pressure drop of dry-plug flow (dry wall condition at the gas portions of plug flow) in round mini-channels has been investigated. The air-water mixture was flowed through the round mini-channels made of Teflon, where the tube diameters ranged from 1.26 to 2.06 mm. For the present experimental range, with decreasing of the tube diameter, the transition between the plug and slug flows (wet and dry) happened at the higher gas superficial velocity region, which were in good agreement with the previous flow pattern maps tested. On the other hand, the transition between the wet- and dry-plug flows was little affected by the change of the tube diameter. In the pressure drop of dry-plug flows, among the correlations tested, the Lee and Lee's (2008) correlation best fitted the measured pressure drop data within the mean deviation of 10% for the present experimental range.

• Journal of Biomedical Engineering Research
• /
• v.26 no.1
• /
• pp.49-54
• /
• 2005

This paper presents a design of 1-channel active dry electrode module for EEG from one's forehead. The IA(instrumentation amplifier) circuit inside the module is based on the configuration sown on the paper MettingVanRijn et al. We analyze the IA circuit to find out the related equation, and then compare its simulated characteristic with the result obtained from the real active dry electrode circuit. With the active dry electrode and the wet(Ag/AgCI) electrode connected to the separated analog processing module on one's forehead at the same time, their real time and FFT outputs of EEG are examined for comparison. The active dry electrode module has advantages over the wet electrode and its analog processing module: 1) The size of the analog processing circuit of the active dry electrode module is smaller than that of existing EEG analog processing module; 2) the total cost required to make the proposed analog processing circuit is much lower than that of the existing circuit, since the designed circuit needs smaller parts; 3) the electrical characteristic is comparable to the general EEG analog processing module even if the designed module has simpler circuit configuration.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.113-124
• /
• 1992

The offshore industry created a need for quality wet weld repairs. Wet welding is a fast method of repair providing sound, structural quality welds. It requires less support equipment than a similar underwater dry weld repair or the alternative mechanical connections. Compared to welds made in air, underwater wet welds are plagued by increased hardness due to rapid quenching by the surrounding water. In this paper is described the experimntal study of improving the cooling rates of wet welds of TMCP steel plate by shielding around weld arc surroundings. The principal results of this experimental investigation can be summarized as follows : By shielding around weld arc surrounding, the cooling rates resulting from wet welds on TMCP steel plate could be lower than that of nonshielded wet welds and the fesibility on high quality of mecanical properties of wet weld on TMCP steel plate was carried out with shielded weld arc surrounding.

• Cement
• /
• s.58
• /
• pp.45-55
• /
• 1975

• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.317-327
• /
• 2017

The addition of different types of polymers such as SBR, VAE, Acrylic, etc. in concrete and mortar leads to an increase in compressive, tensile and bond strength and decrease in permeability of polymer modified mortar (PMM) and concrete (PMC). The improvement in properties such as bond strength and impermeability makes PMM/PMC suitable for use as repair/retrofitting and water proofing material. In the present study effect of addition of fluoropolymer on the strength and permeability properties of mortar has been studied. In the cement mortar different percentages viz. 10, 20 and 30 percent of fluoropolymer by weight of cement was added. It has been observed that on addition of fluoropolymer in mortar the workability of mortar increases. In the present study all specimens were cast keeping the workability constant, i.e., flow value $105{\pm}5mm$, by changing the amount of water content in the mortar suitably. The specimens were cured for two different curing conditions. Firstly, these were cured wet for one day and then cured dry for 27 days. Secondly, specimens were cured wet for 7 days and then cured dry for 21 days. It has been observed that compressive strength and split tensile strength of specimens cured wet for 7 days and then cured dry for 21 days is 7-13 percent and 12-15 percent, respectively, higher than specimens cured one day dry and 27 days wet. The sorptivity of fluoropolymer modified mortar decreases by 88.56% and 91% for curing condtion one and two, respectively. However, It has been observed that on addition of 10 percent fluoropolymer both compressive and tensile strength decreases, but with the increase in percentage addition from 10 to 20 and 30 percent both the strengths starts increasing and becomes equal to that of the control specimen at 30 percent for both the curing conditions. It is further observed that percentage decrease in strength for second curing condition is relatively less as compared to the first curing condition. However, for both the curing conditions chloride ion permeability of polymer modified mortar becomes very low.

• Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.178-184
• /
• 2020

Background: Geladas (Theropithecus gelada), endemic to Ethiopia, are distributed closely related to the escarpments and gorge systems of the country, and large populations are found in the Simien Mountain National Park. This study was conducted in Eastern Tigray, Northern Ethiopia, from February 2018 to August 2019 in order to determine population size and composition of geladas. Total count method was used to estimate the population structure of geladas. Observations of the group of geladas based on body size and morphological characteristics were used to classify age and sex categories of the population. SPSS Version 20 was used to analyze the data. Chi-square test was used to compare sex ratio of geladas and population size among the counting sites between wet and dry seasons. Results: A total of 112 and 99 individual of geladas were counted during wet and dry seasons, respectively. Of the average gelada population recorded in this study, 11.4% were adult males, 30.3% were adult females, 12.8% were sub-adult males, 25.6% were sub-adult females, and 19.9% were unidentified juveniles. However, there was no statistically significant difference among the various age and sex groups of geladas counted during wet and dry season (χ² = 2.6, DF = 4, P > 0.05). Variations of group size along seasons were observed in this study. Sex ratio of adult male to adult female was 1:2.6 and 1:2.7 during the dry and wet seasons, respectively. Conclusion: Very small gelada population size was recorded in the current study. An average of 105.5 geladas was recorded during the study period. As this is the first report of gelada population in escarpments of Eastern Tigray, population trend of the geladas cannot decide based on the current study.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.3
• /
• pp.501-505
• /
• 2020

Objective: The purpose of this study was to investigate the effects of aging methods (AM) i.e. dry-aging (DA) and wet-aging (WA) on the physicochemical properties and in vitro digestibility of proteins in beef short loin. Methods: Short loins (M. longissmus lumborum), were trimmed and boned-out on the fifth day postmortem, from a total of 18 Hanwoo, which were purchased from a commercial slaughterhouse. Short loins were separated randomly grouped into one of the three treatments: control, WA (1℃, 7 days), and DA (1℃, 0.5 m/s, 85% relative humidity [RH], 30 days). Results: Dry-aged beef (DAB) exhibited higher pH, water holding capacity (WHC), myofibrillar fragmentation index (MFI), and digestibility, however lower lightness, redness, and yellowness values, cooking loss, and shear force (SF), than those of wet-aged beef (WAB) (p<0.05). The myosin light chain band intensity of DAB was higher than that of control and WAB in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The in vitro digestibility of aged beef was highly (p<0.001) correlated to physicochemical properties except WHC. The correlation coefficient between AMs and WHC was higher than that between AM and SF (p<0.05) or MFI (p<0.001). A high correlation was observed between SF and MFI (p<0.001). Conclusion: Thus, we believe that DAB is more advantageous than WAB owing to its high digestibility and WHC and low SF.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.211-218
• /
• 2013

Cyclic wet and dry conditions in the marine environment structures corrosion is known to be the fastest rising. For that reason, accelerated corrosion test methods for the reproduction of tidal environment has been actively conducted. However, many studies have estimated threshold value for steel corrosion or concentrated in chloride penetration analysis. In this study, cyclic wet and dry conditions to reproduce the structure of the environment in accelerated corrosion and chloride penetration test analysis was performed. Corrosion was determined by the result of reinforcement corrosion monitoring based on galvanic potential measurement and half-cell potential method. Accelerated corrosion test results for each formulation was different corrosion periods, the order OPC> FA> BS> High-strength concrete. FEM durability interpretation program DuCOM was conducted under the same conditions as in accelerated corrosion test. The experimental RCPT tests demonstrated the validity of the result.