• Title/Summary/Keyword: wet-dry

Search Result 1,947, Processing Time 0.031 seconds

A study on physical properties of matt georgette knitted fabrics(I) - on the dimensional characteristics - (Matt georagette 평편포의 물성에 관한 연구(I) - 치수특성에 관하여 -)

  • Choi, Jae-Woo;Jun, Byung-Ik
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.3 no.4
    • /
    • pp.337-343
    • /
    • 2000
  • Physical properties of matt georgette knitted fabrics, which has been developed recently, were investigated to provide fundamental information for the textile industry. Dimensional characteristics were examined with three different loop lengths, where the plain knitted fabrics were knitted with cotton yam and polyester yarn. The matt georgette plain knitted stitch was fully relaxed after wet relaxation treatment at $130^{\circ}C$ for 30minutes and subsequent tumble dry treatment at $70^{\circ}C$ for 90minutes. As the treatment temperature of wet relaxation became higher and the loop length did shorter, all of stitch density, course density and wale density were increased with 31 of $K_1$ 8.3 of $K_2$ and 3.8 of $K_3$. Also, The higher value of $K_4$ could be obtain with shorter loop length. When the loop length became longer, the $K_4$ value was varied in a wide range with the treatment of wet relaxation and subsequent tumble dry.

  • PDF

Investingation of Laser Shock Wave Cleaning with Different Particle Condition (오염 입자 상태에 따른 레이저 충격파 클리닝 특성 고찰)

  • 강영재;이종명;이상호;박진구;김태훈
    • Laser Solutions
    • /
    • v.6 no.3
    • /
    • pp.29-35
    • /
    • 2003
  • In semiconductor processing, there are two types of particle contaminated onto the wafer, i.e. dry and wet state particles. In order to evaluate the cleaning performance of laser shock wave cleaning method, the removal of 1 m sized alumina particle at different particle conditions from silicon wafer has been carried out by laser-induced shock waves. It was found that the removal efficiency by laser shock cleaning was strongly dependent on the particle condition, i.e. the removal efficiency of dry alumina particle from silicon wafer was around 97% while the efficiencies of wet alumina particle in DI water and IPA are 35% and 55% respectively. From the analysis of adhesion forces between the particle and the silicon substrate, the adhesion force of the wet particle where capillary force is dominant is much larger than that of the dry particle where Van der Waals force is dominant. As a result, it is seen that the particle in wet condition is much more difficult to remove from silicon wafer than the particle in dry condition by using physical cleaning method such as laser shock cleaning.

  • PDF

Physical Properties Analysis of the High-Tech Fibers for Fishing Gear Materials 1. Tensile Strength of the High-tech Fibers (어구재료용 신소재섬유의 물성분석 - 1 . 신소재섬유의 인장강도 -)

  • Kim, Tae-Ho;Ko, Kwan-Soh
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.29 no.2
    • /
    • pp.117-123
    • /
    • 1993
  • In order to analysis the tensile properties of the high-tech fibers for fishing gear materials. tensile strength was tested on raw materials, single yarns and netting twines(plied yarns)made of nylon, kevlar 29 and techmilon respectively. The results obtained are as follows: 1. The tensile stress and tenacity of unknotted single yarns in dry and wet conditions were 3 to 3.5 times greater in the high-tech fibers than in nylon. But the elongation of the high-tech fibers was about 15% of that in nylon. 2. The tensile strength of knotted single yarns in dry and wet conditions was arranged in order of as follows : techmilon. kelver 29, and nylon. The ratio of knot strength to tensile strength, knot efficiency, was the highest in nylon. 3. The tensile strength of unknotted netting twines in dry and wet conditions was 2.3 to 2.5 times greater in the high-tech fibers than in nylon. 4. The tensile strength of knotted netting twines in dry and wet conditions was arranged in order of as follows : techmilon, kevlar 29, nylon. The knot efficiency was the highest in nylon.

  • PDF

Effects of Phosphorus Doping Concentration on the Oxidation Kinetics of Tungsten Polycide I (텅스텐 폴리사이드의 산화반응속도에 미치는 인 도핑 농도의 영향 I)

  • 이종무;윤국한;임호빈;이종길
    • Electrical & Electronic Materials
    • /
    • v.4 no.1
    • /
    • pp.19-30
    • /
    • 1991
  • W/Si의 조성비가 2.6인 CVD텅스텐 실리사이드를 어닐링처리후 dry 또는 wet oxidation하여 폴리사이드 구조에서 다결정 Si내의 농도가 실리사이드의 산화반응속도에 미치는 영향을 조사하였다. 인의 농도에 관계없이 항상 실리사이드의 산화속도가 (100)Si의 그것보다 더 높았다. 저온에서 dry oxidation한 경우 인의 농도가 증가함에 따라 산화속도는 감소하였으나 고온에서 dry oxidation한 경우에는 P농도와 산화속도간에 상관관계가 별로 없었다. 한편, wet oxidation의 경우에는 모든 산화온도에서 인의 농도가 높을수록 실리사인의 산화속도가 더 낮은 것으로 나타났다.

  • PDF

Adhesion Properties of Polymer Composite Materials for Concrete Repair (콘크리트 보수용 폴리머 복합재료의 접착강도 특성)

  • 지경용;연규석;이윤수
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 1998.10a
    • /
    • pp.330-335
    • /
    • 1998
  • This research was conducted to evaluate the adhesion in tension of the polymer mortars for cement concrete repair. Various polymer types, binder ratios, and wet/dry conditions of the surface were considered in this study. Styrene-butadiene rubber (SBR) and ethylen vinyl acetate (EVA) used for polymer cement mortars. Epoxy resin (EP), and unsaturated polyester resin (UP) were used for polymer mertars. Adhesion in tension for the dry condition of the substrate surface was higher than that for the wet condition of the substrate surface under the same binder ratio. Therefore, in repairing concrete, the dry surface condition was effective on adhesion.

  • PDF

Reviews on the Application of Dry Coupler PC Member Joining Technology (건식커플러를 활용한 PC부재 접합기술의 적용현장에 대한 고찰)

  • Park, Je-Young;Moon, Hyung-Jae
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2023.05a
    • /
    • pp.233-234
    • /
    • 2023
  • This paper confirms the application sites of dry coupler technology, which is a direct connection method using screw threads, and Unlike wet couplers, this method can stand on its own without proof support and continuous work on the upper part. Furthermore, concludes with personal considerations to improve constructability.

  • PDF

The effect of implant drilling speed on the composition of particle collected during site preparation

  • Jeong, Chang-Hee;Kim, Do-Young;Shin, Seung-Yun;Hong, Jong-Rak;Kye, Seung-Beom;Yang, Seung-Min
    • Journal of Periodontal and Implant Science
    • /
    • v.39 no.sup2
    • /
    • pp.253-259
    • /
    • 2009
  • Purpose: This study was aimed to evaluate the effect of implant drilling speed on the composition of particle size of collected bone debris. Methods: $Br{\aa}nemark$ $System^{(R)}$ drills were used to collect bone debris from 10 drilling holes (1 unit) at 1,500 rpm (Group A) and 800 rpm (Group B) in bovine mandible. After separating particles by size into > 500 ${\mu}m$, between 250 ${\mu}m$ and 500 ${\mu}m$, and < 250 ${\mu}m$ fractions, particle wet volume, dry volume, and weight were measured and the proportion of 3 fractions of bone debris to total wet volume, dry volume and weight was calculated as wet volume % , dry volume % and weight %. Results: No significant differences were found between Group A and B in wet volume, dry volume, and weight. However, of >500 ${\mu}m$ fractions, Group B had significantly higher wet volume %(P = 0.0059) and dry volume %(P = 0.0272) than in Group A. Conclusions: The drilling speed influenced the composition of particle size in collected drilling bone debris. The drilling in 800 rpm produced the more percentage of large particles than in 1,500 rpm. However, the drilling speed didn't effect on total volume of and weight of bone debris.

Comparison of Particle Size Analysis and Distribution of Heavy Metals in River and Lake Sediments (하천 및 호소 퇴적물 입도분석 방식의 비교와 입도에 따른 중금속물질의 분포경향)

  • Oh, Hyungsuk;Shin, Wonsik;Kim, Joonha;Hwang, Inseong;Hur, Jin;Shin, Hyunsang;Oh, Jeongeun;Huh, Inae;Kim, Younghun
    • Journal of the Korean GEO-environmental Society
    • /
    • v.11 no.5
    • /
    • pp.15-23
    • /
    • 2010
  • Dry sieving, wet sieving and photoscattering analyzer were tested as particle size analyzing methods for sediments from rivers and lakes of Han river, Nakdong river, Youngsan river, and Kumgang river area. Dry sieving showed a big error due to coagulating effect over drying process and this phenomena was severe for lake sediment. Wet sieving and PSA showed an accurate results though wet sieving needs more labor and complicate processes. Freeze-dry or freeze-dry after oxidation of organics with hydrogen peroxide showed improved results but gave lower portion of fine particles in comparing with wet sieving. Heavy metal contents and extractable metal contents were investigated for the sediments and high heavy metal content and extractable amount were obtained from fine particles as expected. Using of proper particle size analyzing method is important and the sediment management should be focused on the fine particles.

Population structure and habitat use of gelada baboon (Theropithecus gelada) in Wof-Washa Forest (Gosh-Meda Area), Central Ethiopia

  • Goshme, Birhanu;Yihune, Mesele
    • Journal of Ecology and Environment
    • /
    • v.42 no.4
    • /
    • pp.292-297
    • /
    • 2018
  • Background: Gelada baboon is one of the endemic mammals of Ethiopia residing in different highlands. The population structure and habitat use of gelada baboon in Wof-Washa particularly Gosh Meda area was investigated from September 2016 to August 2017. Total counting method was used to collect data on the population status by dividing the study area in to four blocks, namely, Kundi, Arbgebeya, Goshber, and Goshmeda. Data were analyzed using SPSS software. The age-sex category and the numbers of geladas found within the different blocks were analyzed using one-way ANOVA, and paired t test was also used to analyze the pair wise comparison of the different age and sex categories during both dry and wet seasons. Results: A total of 435 and 471 gelada baboons were counted during the wet and dry seasons, respectively. The maximum group size consisted of 178 individuals whereas the minimum group size contained 53 individuals. Out of the total population adult females accounted for 54.7% in the wet and 54.56% in the dry seasons. There was a significant difference among the age-sex categories in both the wet ($F_{2432}=630$, P < 0.05) and dry ($F_{2468}=696.6$, P < 0.05) seasons. The male to female ratio was 1:5.7 during wet season and 1:5.8 during dry season. So that the population will have a better chance to increase in the study area. Conclusion: Wof-Washa Forest could be a good site for eco-tourism activities due to the presence of endemic animals and its scenic beauty. However, the quality of the habitat is decreasing due to livestock grazing, agricultural expansion, and invasion of exotic plants species. Therefore, appropriate conservation measures should be implemented to conserve gelada baboon in particular and other wildlife resources in general.

Vegetation Assessment of the Street Tree Sites in the Daegu Metropolis (대구광역시 가로수 하단부 식생의 평가)

  • Kim Jeong-Sub;Cho Kwang-Jin;Kim Jong-Won
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.33 no.1 s.108
    • /
    • pp.71-80
    • /
    • 2005
  • In order to search for ecologically indicative characteristics on the street tree plots in Daegu area, plant communities and their floras were investigated. A total of 105 plots were collected and numerically analyzed by PCoA(Principal Coordinates Analysis). These plots were classified into 4 types containing 139 species, 97 genera, 42 families(including 37 exotic species): urban-dry type, urban-wet type, rural-dry type, rural-wet type. Habitat connectivity to the surrounding vegetation cover, extent and frequency of human impacts, and soil moisture recognizably were the main factors to allow the plots differentiation. Indicative species composition to these four types was generated as Eleusine indica-Eragrostis multicaulis-Oxalis corniculata to the urban-wet, Digitaria ciliaris-Eleusine indica-Eragrostis multicaulis to the urban-dry, Setaria viri-dis-Artemisia-Lactuca indica var. laciniata to the rural-wet, and Setaria viridis-Digitaria ciliaris-Erigeron canadensis to the rural-dry, respectively. Mean species number per plot for rural type was 2.5 times higher than for urban types. Street tree species representative to the rural-wet type is Zelkova serrata, which is a key species of potential natural vegetation in the alluvial land of Daegu area. Street tree plots were characterized by Eleusine indica showing the highest r-NCD value and also C4-assimilation grass plants. Views on the efficacy of the rural-wet type and the reinforcement of vegetation connectivity and soil moisture in rehabilitating street tree plots, are discussed.