• Restorative Dentistry and Endodontics
• /
• v.17 no.1
• /
• pp.104-114
• /
• 1992

The purpose of this study was to evaluate the shear bond strength of glass ionomer cement(Ketacfil, ESPE, Co.) against dentin surface which had been treated with surface conditioning agents(distilled water, 5% sodium hypochlorite solution, Ketac - conditioner, 40% polyacrylic acid). In this study, 60 human molars with sound and healthy crown portion which were previously extracted for orthodontic or periodontal problem. The dentin surfaces of these teeth were exposed with wet trimmer and polished with 150 - grit and 600 - grit silicon carbide paper and the teeth were divided into four groups(15 teeth per group) according to the following surface conditioning methods. Group I : Surface treatment with distilled water as control group. Group II : Surface conditioning with 5% sodium hypochlorite solution. Group III : Surface conditioning with Ketac conditioner. Group IV : Surface conditioning with 40% polyacrylic acid. The shear bond strengths were measured by Autograph(Shimatzu Co. Japan). The result of the evaluations were then subjected to statistical analysis using one - way analysis of variance and Duncan test and the results were as follows : 1. The shear bond strength accrding to the dentin surface conditioning conditions was highest in Ketac conditioner group, with measurements of $44.44{\pm}0.74(kg/cm^2)$ and lowest in the distilled water group, with measurements of $28.84{\pm}0.88(kg/cm^2)$. 2. Statistically significant differences were found between surface conditioning with 5% sodium hypochlorite solution group or Ketac conditioner group and distilled water group(P<0.01). 3. Also, statistically significant difference was found between surface conditioning with distilled water group and 40% polyacrylic acid group(P<0.05). 4. Overall difference in statistical significance between the groups was not found (P<0.05). 5. Fractured dentin surface treated with conditioning solutions showed cohesive fracture. 6. Distilled water group and 5% sodium hypochlorite solution group removed the smear layer less effectively. 7. Conditioning dentin with Ketac conditioner and 40% polyacrylic acid resulted in the removal of a significant amount of the smear layer without removing the tubular plugs and dissolving the peritubular dentin.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.5
• /
• pp.323-334
• /
• 2021

Pilot-scale coagulation and sedimentation processes were operated to investigate the T-P (Total phosphorus) removal efficiency. A multiple regression model was also derived to predict the water quality improvement effect with river water characteristics. The inflow rates for the pilot-scale facility were 157-576 m³/day, and the coagulant doses were in the range of 13.7-58.5 mg/L (average 38.9 mg/L) for PAC (Poly alum chloride) and 16.5-62.1 mg/L (average 36.0 mg/L) for alum. The results found that the influent BOD (Biochemical oxygen demand) and T-P concentrations were 4.9 mg/L and 0.115 mg/L, and the removal efficiencies were 52.7% and 59.4%, respectively. T-P removal efficiencies on wet weather days were higher by 10% than dry weather days because influent solids influenced T-P's coagulation process. The pH of river water was 6.9-7.8, and the average pH was 7.3. Although the pH variation was not significant, the trend showed that the treatment efficiency of T-P and PO₄-P removal increased. Thus, the pH range considered in this study seems to be appropriate for the coagulation process, which is essential for phosphorous removal. The T-P removal efficiencies were 19.6-93.3% (average 59.2%) for PAC and 16.4-98.5%(average 55.9%) for alum; thus, both coagulants showed similar results. Furthermore, the average coagulant doses were similar at 42.4 mg/L for PAC and 41.3 mg/L for alum. When the T-P concentration of the effluent was compared by the [Al]/[P] ratio, the phosphorus concentration of the treated water decreased with an increasing [Al]/[P] ratio, and the lowest T-P concentration range appeared at the [Al]/[P] ratio of 10-30. A seasonal multiple regression analysis equations were derived from the relationships between 10 independent and dependent variables (T-P concentration of effluent). This study could help lake water quality maintenance, reduce eutrophication, and improve direction settings for urban planning, especially plans related to developing waterfront cities.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.485-492
• /
• 2018

About 300 thousand tones of oyster shells are produced annually and, thus, their massive recycling methods are required. Recently, a method, utilizing them as wet desulfurization materials after removal of organic matters and changing $CaCO_3$ phase into CaO through calcination, is under consideration. This study investigates the mineralogical changes (specific surface area, phase changes, surface state, etc.) of oyster shells by calcination and their characteristics were compared with those of limestone. Uncalcined oyster shells showed the higher specific surface area than limestone because the former are composed of platy and columnar structures. In contrast, investigated limestone showed a dense structure. The phase change of oyster shells occurred at lower temperature than that of limestone. The specific surface area of oyster shell decreased significantly after calcination while limestone depicted a drastic increase. Small amount of Na contained in oyster shell was suggested as the cause of this phenomenon; in that, it acted as a flux causing melting and sintering of oyster materials at lower temperature. Because of this, an additional phenomenon was observed that a part of shell materials remained untransformed even at higher calcination temperature and after longer treatment period due to the sintered surface, which covers the rest parts. Further studies investigating the effect of this phenomena from the perspective of desulfurization is required.

• Korean Journal of Pharmacognosy
• /
• v.50 no.1
• /
• pp.37-45
• /
• 2019

Portulaca oleracea L. (PL) has been used in traditional medicine herb for treatment of various diseases, such as diarrhea, dysentery, and skin inflammation. Previous studies have shown that the PL regulates the inflammation by inhibition of pro-inflammatory cytokines. Although PL might have improvement effects of intestinal function and bioactive effects, there are not enough studies to demonstrate. This study investigated the effects of KDC16-2 on the improvement of intestinal function and anti-inflammatory effects in vivo and in vitro. The improvement effect of intestinal function was measured fecal amount, water content and intestinal transit rate in KDC16-2 treated ICR mice. As results, compared with the control group, the KDC16-2 group showed a significant increase in wet fecal weight, dry fecal weight and fecal water content. The intestinal transit rate of KDC16-2 group was significantly increased. Based on the results, KDC16-2 is considered to have effects on improving intestinal function. The effect of anti-inflammatory demonstrated by using dextran sulfate sodium (DSS)-induced colitis mice. The mice were administered 3% DSS along with KDC16-2 (100, 300 mg/kg) for 14 days. DSS-induced colitis mice were significantly ameliorated in KDC16-2 treated group, including body weight loss, colon length shortening, tight junction protein of colon and histological colon injury. The levels of inflammatory mediators (IgG2a, IgA, C-reactive protein and Myeloperoxidase) and pro-inflammatory cytokines (tumor necrosis factor (TNF)-${\alpha}$, Interleukin (IL)-6) which are involved in inflammatory responses were increased in the DSS-treated group as compared to those in the control group, and the levels were significantly decreased in the KDC16-2 groups. In addition, we investigated the impact of KDC16-2 on lipopolysaccharide (LPS)-induced inflammatory responses in J774A.1 cells. KDC16-2 inhibited production of prostaglandin E2 (PGE2) and reactive oxygen species (ROS). These results suggested that the KDC16-2 could effectively alleviate the dysfunction of intestinal and inflammatory mediators. Thus, these KDC16-2 can be potentially used as health functional food of intestinal.

• Journal of Nutrition and Health
• /
• v.52 no.1
• /
• pp.17-25
• /
• 2019

Purpose: Obesity is a major health problem of global significance because it is clearly associated with an increased risk of health problems, such as nonalcoholic fatty liver disease (NAFLD), diabetes, cardiovascular diseases, and cancer. Lonicera caerulea (LC) originates from high mountains or wet areas and has been used as a traditional medicine in northern Russia, China, and Japan. LC contains a range of bioactive constituents, such as vitamins, minerals, and polyphenols. This study examined the anti-obesity effects of LC during differentiation in preadipocytes. Methods: The cell viability assay was performed after the differentiation of 3T3-L1 cells for 7 days. Oil Red O staining was used to visualize the changes in lipid droplets in 3T3-L1 cells and mouse adipose-derived stem cells (MADSCs). The mRNA expression of obesity-related genes was determined by quantitative real-time PCR. Results: According to the results of Oil Red O staining, the lipid levels and size of lipid droplets in the adipocytes were reduced and the LC extract (LCE, 0.25-1 mg/mL) markedly inhibited adipogenesis in a dose-dependent manner. The treatment of LCE also decreased the mRNA expression of peroxisome proliferator-activated receptor ${\gamma}$ ($PPAR{\gamma}$), CCAAT/enhancer binding protein-${\alpha}$ ($C/EBP{\alpha}$), and sterol regulatory element binding protein 1 (SREBP1) in 3T3-L1 cells. Western blot analysis showed that the $PPAR{\gamma}$, $C/EBP{\alpha}$, and SREBP1 protein levels in both 3T3-L1 and MADSC were reduced in a dose-dependent manner. Conclusion: These results suggest that LCE can inhibit adipogenic differentiation through the regulation of adipogenesis-related markers.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.3-14
• /
• 2020

This study aims to introduce and review on the recovery technologies of rare earth elements(REEs) from coal ash. Many researchers have been carried out by various beneficiation processes, such as particle size separation, magnetic separation, specific gravity, and flotation to recover rare earth elements from coal ash generated from Pulverized Coal(PC) boiler. Through the beneficiation process, it was confirmed that concentration of rare earth elements was much lower than the 4,700 ppm, and that additional enrichment treatment through wet process was needed for the products recovered after the beneficiation process. It was confirmed that the rare earth elements contained in coal ash were applied to the leaching process after pretreatment such as alkali-fusion to improve leaching efficiency. Although beneficiation and leaching methods have been studied, its optimum recovery technologies for rare earth elements not been confirmed up to now, research on the recovery of rare earth contained in coal ash is reported to continue. In case of Korea, the technology for the recovery of rare earth elements from coal ash and coal by-product could not been confirmed up to present. In these reasons, it is urgent to develop technologies such as beneficiation and leaching process continuously.

• Clean Technology
• /
• v.28 no.3
• /
• pp.203-209
• /
• 2022

An environmental evaluation was conducted by employing LCA methodology for a mechanical seal manufacturing process that uses recycled silicon recovered from end-of-cycle PV modules. The recycled silicon was purified and reacted with carbon to synthesize β-SiC particles. Then the particles underwent compression molding, calcination and heat treatment to produce a product. Field data were collected and the potential environmental impacts of each stage were calculated using the LCI DB of the Ministry of Environment. The assessment was based on 6 categories, which were abiotic resource depletion, acidification, eutrophication, global warming, ozone depletion and photochemical oxidant creation. The environmental impacts by category were 45 kg CO₂ for global warming and 2.23 kg C₂H₄ for photochemical oxide creation, and the overall environmental impact by photochemical oxide creation, resource depletion and global warming had a high contribution of 98.7% based on weighted analysis. The wet process of fine grinding and mixing the raw silicon and carbon, and SiC granulation were major factors that caused the environmental impacts. These impacts need to be reduced by converting to a dry process and using a system to recover and reuse the solvent emitted to the atmosphere. It was analyzed that the environmental impacts of resource depletion and global warming decreased by 53.9% and 60.7%, respectively, by recycling silicon from end-of-cycle PV modules. Weighted analysis showed that the overall environmental impact decreased by 27%, and the LCA analysis confirmed that recycling waste modules could be a major means of resource saving and realizing carbon neutrality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.56-63
• /
• 2018

The management of Combined Sewer Overflows(CSOs) and Separated Sewer Overflows(SSOs) discharge directly to the effluent system in an untreated state, which occurs when the facility capacity is exceeded due to heavy rain, has become an important issue in recent years as the heavy rain becomes a regular phenomenon. Despite the continuous development of filtration technology, targeting densely populated urban areas, CSOs are rarely applied. Therefore, this study was carried out to optimize the process to apply CSOs in a pilot-scale horizontal flow filtration system with a rope-type synthetic fiber. The research was carried out in two steps: a preliminary study using artificial samples and a field study using sewage. In the preliminary study using an artificial sample, head loss of the filter media itself was analyzed to be approximately 1.1cm, and the head loss was increased by approximately 0.1cm as the linear velocity was increased by 10m/hr. In addition, the SS removal efficiency was stable at 81.4%, the filtration duration was maintained for more than 6 hours, and the average recovery rate of 98% was obtained by air backwashing only. In the on-site evaluation using sewage, the filtration duration was approximately 2 hours and the average removal efficiency of 83.9% was obtained when belt screen (over 450 mesh) was applied as a pre-treatment process to prevent the premature clogging of filter media. To apply the filtration process to CSOs and SSOs, it was concluded that the combination with the pre-treatment process was important to reinforce the hydraulic dimension for the stable maintain of operation period, rather than efficiency. Compared to the dry season, the quality of incoming sewage was lower in the rainy season, which was attributed to the characteristics of the drainage area with higher sanitary sewerage. In addition, the difference in removal efficiency according to the influent quality of the wet season and dry season was small.

• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.219-238
• /
• 1998

For the purpose of this Study, the situation of Korean costume properties in the collection of overseas museums was investigated through correspondence, interviews with their curators and persons in charge and survey. As results were made about the situation of museum science (conservation) and practical utilization of costume properties. So, the study result were drawn as follows : Krean costume properties unexplaind of 'Korean cultural Properties' could be found in the Metropolitan Museum of Art of New York(135 pieces), the Brooklyn Museum of New York(20 pieces), the Newark Museum of New Jersey(15 pieces), and the Victoria Albert Museum of London(100 pieces). Korean costume properties in the collection of over-seas museums mostly fall under the rang of period between the 19th century and the early 20th century and are classified into everyday clothing, wedding costume and armors for the most part. In 1900s, museum in several countries began to collected Korean cultural properties through foreign missionaries or diplomats as well as merchants or travellers in who bought Korean objects. Recently, scholars, traditional Korean costume designerss and diplomatic and consular offices in overseas have donated our Korean costume to many foreign museums. Korean costume properties were largely on display in the dependent display of folklore museums or in a part of exhibition gallery for Asian culture and there were the separate exhibition rooms in museums in the United Kingdom, Germany, Denmark, Austria, Japan and the United States America. But the size and level of display room for Korean cultural properties is one third as large as that for chinese or Japanese cultual properties. It was found in this study that the traditional Korean costume in the collection of overseas museums was largely recorded only as general items rather than given their proper names. The typical example of misnaming included bridal's Kimono for Wonsam(원삼) in the Metropolitan Museum of Art, Yeonroksaek-bumunsajeokori for Dangeui(당의) and Jissan-gryongwonmunsadurumagi for Kongdali(동달이) in the Okura collection of the Tokyo National Museum, and so on. And the Victoria Albert Museum modified the way of wearing Daenim(대님) and the National Museum of Ethnology in Osaka seemed to misplace the ornament of Keanggi(댕기) on Mubok(무복) and Josunjuk(조선족: Chinese-Korean) Museum also misplace hansam(한삼). On the one hand, the Newark museum of New Jersey mixed Chinese armor with the Korean one and the Photohraph of King Kojong(고종) with Chinese one. It is corrected to publish and disseminate the book concering Korean costume in order to inform foreign museums of thed proper names and wearing method of our traditional costumed. The repair of costume before cleaning in the process of conservation treatment can prevent damage likely to occur as the properties of fiber itself are weakened in liquid. It is recommended that western 8-figure stitch and tacking stitch is added to Korean traditional stitching method. Museums in the U.S.A and the U.K are concerned about the aftermath of cleaning it-self, specially conservation treatment may exert on remains and predominantly use the vacuuming method to remove dust or bits of straw before the exhibition beings. But in case of Korea, the dry cleaning and wet cleaning method are used according to the nature and state of a sample costume. This comprehensive cleaning method is gradually developing scientifically but it is expected that those concerned will make a chemical analysis of the solvent to be used and also the more precise test of costume properties will be conducted before cleaning them. A partial study was made here because the scope of study was too broad and vast. It is expected that more studies will be conducted concerning our costume culture under the long-term plan and active support at the government level.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.240-240
• /
• 2017

Quinoa (Chenopodium quinoa Willd.) is one of the ancient crops cultivated in the Andes region at an altitude of 3,500-4000m in Chile and Bolivia from 5000 BC. It contains a large amount of protein, minerals and vitamins in comparison with other crops. The cultivation area has been increasing worldwide because of its excellent resistance to various abiotic stress such as salinity, drought and low temperature. ${\gamma}$-Ray radiation of high dose is often used as a tool to induce mutations in plant breeding, but it has a deleterious effect on organisms. However, the radiation may have a positive stimulatory effect of 'hormesis' in the low dose range. This experiment was carried out to investigate the optimum dose range for creating the quinoa genetic resources and to investigate the hormesis effect at low dose on the quinoa. This experiment was performed for 120 days from November, 2016 to February, 2017 in the greenhouse of Gyeongsang National University. ${\gamma}$-Ray radiation was irradiated to seeds at 0 Gy, 50 Gy, 100 Gy, 200 Gy, 300 Gy, 400 Gy, 600 Gy, 800 Gy and 1000 Gy for 8 hours. (50 Gy) using the low level radiation facility ($Co^{60}$) of Cooperative Research Institute of Radiation Research Institute, KAERI. Fifty seeds were placed on each petri dish lined with wet filter paper and germination rate was measured at a time interval of 2 hours for 40 hrs. The length of the root length was measured one week after germination. Each treatment was carried out in 3 replicates. The growth of seedlings were investigated for 10 days after transplanting of 30 day-old seedlings. The plant height, NDVI, SPAD, Fv/Fm, and panicle weight were measured. The germination rate was highest at 50Gy and 0Gy and the rate of seeds treated with 400Gy or higher rate decreased to 25% of the seeds treated with 50Gy. The emergence rate of seedling in pot experiment was higher at the dose of 200 Gy, 300 Gy and 400 Gy than at 0 and 50Gy. However, the rate was lower at strong radiation higher than 600Gy at which $1^{st}$ leaf was not expanded fully and dead due to extreme overgrowth at 44 days after treatment (DAT). The highest value of panicle weight was observed at 50Gy (6.15g) and 100Gy (5.57g). On the other hand, the weight at high irradiated dose of 300Gy and 400Gy was decreased by about 55% compared to low dose (50 Gy). NDVI measurement also showed the highest value at 50 Gy as the growth progressed. SPAD was the highest at 400 Gy and showed positive correlation with irradiation dose except 0 Gy. Fv/Fm was high at 50 Gy up to 30 DAT and no difference between treatments was observed except for 400 Gy from 44 DAT. The plant height was the highest in 50Gy during the growing period and was higher in the order of 50Dy, 100Gy, 0Gy, 200Gy, 300Gy and 400Gy in 88 DAT. In this experiment, the optimal radiation dose for hormesis was 50Gy and 100Gy, and the optimal radiation dose for mutagenesis seems to be 400 Gy.