• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.85-90
• /
• 2012

Wet pressing process has great influence not only on the paper properties but also on the efficiency of total manufacturing process including energy efficiency. The slow drainage propensity of old corrugated container(OCC) might require more complicated control of wet pressing process. In this study, the change in press efficiency and in structure of wet sheet by the various condition of laboratory roll press simulator were evaluated to provide background information about wet pressing of OCC. The higher pressure and the slower machine speed resulted in higher efficiency of wet pressing but the change trends of dryness depending on the wet press pressure and machine speed were shown differently according to OCC treatment. The effects of water contents of felt on the wet press efficiency and sheet structure were also investigated. The higher contents of water in felt resulted in less removal of water generally and the crushed structure of wet sheet were appeared especially at higher pressure.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.2
• /
• pp.169-191
• /
• 2008

Objectives : This study was performed to report the present situation of the cupping treatment to make standardization of cupping treatment in Korea. Methods : We searched relevant case reports, surveys, and review articles using a databases of online bibliography. And we had research to oriental medical doctor with questionnaire about the cupping treatment. Results : 1. Cupping treatment is used for diagnoisis, protection and treatment for many kinds of diseases such as musculoskeletal diseases, internal diseases, sequela of cerebral attacks and so on in Korea. 2. Adequate cupping area is the area of lesion. 3. Cupping time and pressure are various. 4. Adequate amount of venesection is 10cc. 5. Adequate dry cupping term is 1 time/day and adequate wet cupping term is 1 time/2~3days. 6. Cognition of adverse reaction of cupping treatment is different among the doctors. 7. Method of disinfection of cup is different among the doctors. Conclusions : The result of this study will help to make the a guideline of cupping treatment. And we have to go ahead studying to make standardization of cupping treatment.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.161-169
• /
• 2009

The objective of this study was to investigate stability of Korean Paper(Hanji) which is being sold in the Korean markets according to aging treatment. In order to know the aging characteristics, the optical and mechanical properties of before and after wet and dry-heat aging treatment were examined. The optical and mechanical properties were shown higher reduction in the dry-heat aging treatment compared to the wet-heat aging treatment. The Soonji (pure mulberry Hanji) made from black mulberry bast pulp was shown a great reduction of the brightness and whiteness, and increase of the opacity in the aging treatment. On the other hand, in case of mechanical properties, the breaking length of Soonji made from white mulberry bast pulp was significantly higher than that of the others, and the tensile strength was shown drastic reduction in according to Soonji made from black mulberry bast pulp in the aging treatment. The burst strength of Soonji made from black and white mulberry bast pulp was shown the similar value in the wet-heat aging treatment. The folding endurance of Soonji made from white mulberry bast pulp was significantly higher than that of others before and after aging treatment. Consequently, Hanji was affected sensitive in the temperature compared to the humidity. Meanwhile, the density and color of the chinese ink was no significant changes before and after wet and dry-heat aging treatment.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.5
• /
• pp.370-378
• /
• 2015

Background : Aruncus dioicus var. kamtschaticus, functional wild vegetable, is perennial herb and young leaves with soft texture are generally used as edible food. So the demand for the vegetable has increased recently. This study was carried out to determine the effects of temperature and shading on germination characteristics of A. dioicus. Methods and Results : The experiment was performed by temperature and shading treatments. Seed pre-treatment before the germination experiment was carried out by the storage in low temperature ($4^{\circ}C$) under wet condition (LTW) for 0, 15, 30, 45 and 60 days and shading treatment were 35%, 50%, and 75% under control, BA (6-benzyladenine) and $GA_3$ (gibberellic acid) condition for 24 hours. Increasing the length of the storage periods led to increases seed germination percent in low temperature ($4^{\circ}C$) under wet condition (LTW), germination rate of A. dioicus seed was the highest at $15^{\circ}C$ with 60 days of seed pre-treatment. In the case of seeds pre-treatment with LTW, the more temperature went up, the more days to 50% of Germination of Final Germination Rate ($T_{50}$) went down. As a result of surveying shading treatment, germination rate was the highest in control of 35% shading and the next higher was in control of 50% shading. Conclusions : It is concluded that the temperature and shading are important factors to produce A. dioicus. Also, We suggest these results as basic data of A. dioicus for sexual propagation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.274-283
• /
• 2014

Swelling of the heat-treated netting for gillnet was estimated through the netting height in square acrylic tank. Experimental Nylon netting and PBSAT netting were heat-treated by using the high-degree vacuum method in hot water after net making. Heat-treatment temperatures were conducted with Nylon netting $105^{\circ}C$ and PBSAT netting $62^{\circ}C$, $65^{\circ}C$, $66^{\circ}C$, $67^{\circ}C$. The swelling measurement method of a netting using the square tank was capable of the reduction measurement errors comparing with measurement methods of a mesh inner angle and the shortening rate of a mesh size. In addition, this method was available to comparison evaluation for each netting more easily. Wet type heat-treatment apparatus with high-degree vacuum was shown higher $7{\sim}8^{\circ}C$ inner side temperature than a setting temperature. The tensile strength and elongation of Nylon netting and PBSAT netting were shown higher wet condition than dry condition. The tensile strengths of PBSAT monofilaments in dry and wet condition were sharply decreased at heat-treatment temp. $75^{\circ}C$ than heat-treatment temp. $74^{\circ}C$.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.35 no.1
• /
• pp.48-57
• /
• 2022

Objectives : The purpose of this review study is to identify clinical indications of Hwangryunhaedok-tang(HHT) external application and to suggest directions for future research and treatment by analyzing domestic cases applying HHT external treatment except for pharmacopuncture research. Methods : We searched 235 studies published in Korean since 2000 from four domestic databases: Oriental Medicine Advanced Searching Integrated System(OASIS), Research Information Sharing Service(RISS), Korean Traditional Knowledge Portal(KTKP), and Korean studies Information Service Systems(KISS) using keywords such as 'HTT and external use', 'HHT and external agent' 'HHT and wet dressing', or 'HHT and case'. We excluded duplicate papers, papers related to acupuncture including pharmacopuncture, or papers not related to the topic. Results : We selected and analyzed seven case reports. HHT external agent was used alone in one case, as main treatment in two cases, and as adjuvant treatment in four cases. HHT external application was applied to various skin diseases accompanied by inflammation mainly in the form of wet dressings. Conclusion : HHT external agent may be effective on various skin diseases accompanied by inflammation when applied alone or in combination with other agents according to the treatment stage. Based on this results, further studies will be needed to establish the primary clinical indication of HHT external agent.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.1
• /
• pp.15-23
• /
• 2000

Effect of fixation methods on the flame retardant(FR) and performance properties of MDPPA/HMM treated cotton fabrics were studied. Combination of three different fixation methods - premercerization, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of cotton with MDPPA/HMM. As a result, an increase in internal volume of cotton fiber by pre-mercerization and addition of swelling agent, and wet fixation increased %add-on of FR agent improving FR efficiency and wash fastness. Tensile strength of MDPPA/HMM treated cotton fabrics by wet fixation and swelling agent were slightly decreased, but that of premercerized cotton was improved. Wet fixated fabric showed lower bending rigidity and better compressional properties which improved fabric hand. Retention of swelling ability of cotton treated with MDPPA/HMM improved moisture absorption properties.

• Journal of the Korean Ceramic Society
• /
• v.42 no.10 s.281
• /
• pp.645-648
• /
• 2005

To fabricate a (100) silicon hard master, we used anisotropic wet etching for the embossing. The etching chemical for the sili­con wafer was a TMAH 25$\%$ solution. The anisotropic wet etching produces a smooth sidewall surface inclined at 54.7°, and the surface roughness of the fabricated master is about 1 nm. After spin coating an organic-inorganic sol-gel hybrid resin on a silicon substrate, we used the fabricated master to form patterns on the silicon substrate. Thus, we successfully obtained patterns via the hot embossing technique with the (100) silicon hard master. Moreover, by using a single hydrophobic surface treatment of the master, we succeeded in achieving uniform surface roughness of the embossed patterns for more than ten embossments.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.186-191
• /
• 1999

Results are shown on the preparation and characterization of homopolymer of 2-methacryloyloxyethyl isocyanate(MOI) ad copolymers of MOI with styrene synthesized by radical polymerization. The significant effectiveness of the polymers as additives for paper dry and wet strength was found. Dry strength can be increased by 75% and wet strength retention of sheets can reach 30% based on the increased dry strength and about 50% based on the dry strength of untreated sheet. Based on isocyanate group consumption, copolymers containing less isocyanate can give better effect than homopolymer in sheet wet strength improvement. Furthermore, the base paper containing a small amount of polyallylamine hydrochloride was used for polymer treatment and got higher wet strength improvement.

• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.956-966
• /
• 2003

The purpose of study is to find out a suitable cleaning method for excavated textiles of Jeon-ui Lee(1570∼1647). The textiles were excavated from her tomb in 1997, and her descendents put them in a box without any treatment and kept them in the warehouse since then. We used two kinds of silk as samples, non-dyed and dyed textile. The experiment was performed by 8 kinds of wet cleaning and dry cleaning methods, an ultrasonic cleaner was used in the wet cleaning, decane and perchloroethylene were used as solvents in the dry cleaning. The use of the ultrasonic cleaner in the wet cleaning method did not show any damage to the fibers of the textiles and it not only cleaned well but also was safe for the fugitive dyes. It resulted in more effective cleaning when the detergent was used together. Therefore, it is effective to use the ultrasonic cleaning on the delicate historical textiles and helpful to the operator's safety and environment.