• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.208-208
• /
• 2017

No-tillage practices are expected to provide several benefits such as increasing soil organic matter, reducing labor time and saving energy cost compared with conventional tillage practices. This study was conducted to investigate the effects of no-tillage dry-seeding on rice growth and soil properties in comparison with other rice cultivation methods, machine transplanting and wet-hill-seeding on puddled paddy. Rice seedling establishment was slightly higher in no-tillage dry-seeding treatment ($145seedling\;m^{-2}$) than wet-hill-seeding on puddled paddy treatment ($111seedling\;m^{-2}$), but the seedling establishment in both treatments fell within the optimum range for direct seeding rice cultivation. Plant height, number of tillers and chlorophyll content (SPAD value) of rice in no-tillage dry-seeding treatment were higher than those of the other treatments. However, no significant differences in grain yield was observed among three cultivation methods, and the yield ranged 5.8 to $5.9ton\;ha^{-1}$. The heading date from seeding under no-tillage dry-seeding treatment was on average 109 days, which was similar to that under machine transplanting treatment (112 days), but 10 days later than that under wet-hill-seeding on puddled paddy treatment (99 days). Grain quality characteristics grown in no-tillage dry-seeding were similar to those grown in the other cultivation methods. These results indicate that no-tillage dry-seeding practice is comparable to conventional tillage system in terms of seedling establishment, growth, yields and grain quality.

• Particle and aerosol research
• /
• v.15 no.1
• /
• pp.1-13
• /
• 2019

Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.17-26
• /
• 2011

Drying behavior and physical properties of HwBKP, SwBKP, and OCC handsheets depending on kneading, refining and wet pressing were analyzed. The maximum drying shrinkage velocity was newly adopted to verify the effect of mechanical treatment of pulps by evaluating drying behavior according to varying the kneading, refining and wet pressing treatments. Those various treatments were changed to evaluate the relationship between the maximum drying shrinkage velocity and handsheets properties. When the drying shrinkage and the maximum drying velocity increased by refining and wet-pressing, handsheets strength was increased. The maximum drying shrinkage velocity showed higher correlation with physical properties of paper than WRV at different refining loads at SwBKP and mixed pulp. At high wet-web dryness, drying shrinkage, the maximum drying shrinkage velocity and strength properties of handsheet were increased. It meant that drying shrinkage behavior was highly affected by not only fibers' shrinkage but also fiber bonding. Kneading pre-treatment for KOCC and SwBKP effectively modified fiber properties and increasing paper strength and drying shrinkage. The effect of kneading pre-treatment was also confirmed by the maximum drying shrinkage velocity. Strength properties of mixed pulp handsheets were not increased by the kneading pre-treatment, although the maximum drying shrinkage velocity and WRV was increased. It meant that fibers network bonding of HwBKP was limited because of ves sels and ray cells' interference for bonding. Therefore in order to improve paper strengths containing HwBKP by mechanical treatments, interference of vessels and ray cells for fiber bondings should be carefully controlled.

• Food Science of Animal Resources
• /
• v.33 no.6
• /
• pp.752-756
• /
• 2013

This study was carried out to investigate the effect of cooking condition on the water-soluble flavor precursors relevant to postmortem glycogen metabolisms in various beef muscles from Hanwoo (Korean cattle). The loins, striploins, top rounds, and eye of rounds from 40-mon-old heifers were cooked in either with $100^{\circ}C$ water bath (wet-cooking) or $180^{\circ}C$ household electric oven (dry-cooking) until attained to about $80^{\circ}C$ of internal temperature before the measurements of amounts of macroglycogen, proglycogen, free glucose, and lactate. The macroglycogen and proglycogen contents were not significant differences in all beef muscles between the wet-cooking and dry-cooking treatments. Regardless of cooking condition, the both loin and top round had higher (p<0.05) two types of glycogen than the eye of round. The free glucose and lactate contents presented higher trends in the dry-cooking treatment compared with the wet-cooking treatment. The wet-cooked top round had higher (p<0.05) free glucose than the wet-cooked eye of round. Moreover, the top round contained the highest lactate content regardless of cooking condition. Consequently, it is considered that the dry-cooking treatment would be more beneficial to the flavor of cooked beef muscles than the wet-cooking treatment.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.311-316
• /
• 2010

This study aimed to prepare antimony-doped tin oxide (ATO) dispersion with high stability. The methods to achieve this goal were sought by investigating the changes of ATO particle size, size distribution, dispersion property as wet ball milling treatment time increased. And the changes of wet ball milled ATO dispersion property were also investigated, as pH increased. The changes of ATO particle size and size distribution, according to wet ball milling treatment time were evaluated with laser diffraction particle size analyzer and scanning electron microscope (SEM). The changes of ATO dispersion property, as wet ball milling treatment time and pH increased, were evaluated with zeta potential analysis and Turbiscan. By 60 min wet ball milling treatment time, ATO particle size decreased and size distribution became narrower, as the treatment time increased. After 60 min milling, the ATO particle size decreased to less than 30% of the initial size and the size distribution was narrowed to $0.1{\sim}5{\mu}m$ from $1{\sim}35{\mu}m$. However, more than 60 min milling, ATO particles aggregated and the particle size increased. ATO dispersion stability also increased as the treatment time and pH increased because the reduced particle size increased particle surface energy and repulsion between particles and the increased pH enhanced particle surface ionization. Hence, after proper length of wet ball milling treatment, highly stable ATO dispersion can be prepared, as increasing pH of the dispersion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.173-179
• /
• 1999

The effect of the surface activation treatment on the crystallization of the amorphous silicon film was investigated. The amorphous silicon film was deposited on the silica substrate with LPCVD technique. Wet blasting with silica slurry or exposure with Nd:YAG laser beam was applied on the amorphous silicon film before annealing for the crystallization. For the analysis of the crystallinity, XRD, Raman, and SEM were employed. In this investigation, the prior surface activation treatment like silica wet blasting or Nd:YAG laser beam exposure before annealing for the crystallization were found to be effective in the enhancement of the crystallization. It is believed that these treatment lower the activation energy required for the crystallization of the amorphous silicon film.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.4
• /
• pp.337-343
• /
• 2000

Physical properties of matt georgette knitted fabrics, which has been developed recently, were investigated to provide fundamental information for the textile industry. Dimensional characteristics were examined with three different loop lengths, where the plain knitted fabrics were knitted with cotton yam and polyester yarn. The matt georgette plain knitted stitch was fully relaxed after wet relaxation treatment at $130^{\circ}C$ for 30minutes and subsequent tumble dry treatment at $70^{\circ}C$ for 90minutes. As the treatment temperature of wet relaxation became higher and the loop length did shorter, all of stitch density, course density and wale density were increased with 31 of $K_1$ 8.3 of $K_2$ and 3.8 of $K_3$. Also, The higher value of $K_4$ could be obtain with shorter loop length. When the loop length became longer, the $K_4$ value was varied in a wide range with the treatment of wet relaxation and subsequent tumble dry.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.748-753
• /
• 2009

The surface morphology and the surface roughness of n-type SiC induced by wet-treatment using 45% KOH and buffered oxide etchant (BOE-1HF : $6H_2O$) were investigated by atomic force microscopy (AFM). While Si-face of SiC could be etched by alkali solutions such as KOH, acidic solutions such as BOE were hardly able to etch SiC. When the rough SiC samples were used, the surface roughness of etched sample was decreased after wet-treatment regardless of etchant, due to the planarization the of surface by widening of scratches formed by mechanical polishing. It was observed that the initial etching was affected by the energetically unstable sites, such as dangling bond and steps. However, when a relatively smooth sample was used, the surface roughness was rapidly increased after treatment at $180^{\circ}C$ for 1 hr and at room temperature for 4 hr by using KOH solution, resulting from the nano-sized structures such as pores and bumps. This indicates that porous SiC surface can be achieved by using purely chemical treatment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.4
• /
• pp.357-369
• /
• 1989

The purpose of this study was to investigate the effects of treatment temperature and time on the, of easy-care and strength properties of the wet fixation processed rayon fabrics. Viscose rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100 and 100/150(g/1). Magnasium chloride was used as a catalyst. The wet fixation conditions were 24hrs at room temperature,20 mins at $75^{\circ}C$ and 5 mins at $105^{\circ}C$ Wet fixation processed fabrics did not show the difference in the resin add-one, DP ratings and wrinkle recovery angles by the different treatment temperatures and times. DP ratings were in the order of $105^{\circ}C>75^{\circ}C>room$ temp, in one bath and two bath wet fixation. Breaking and tearing strength of one bath processed fabrics showed in the order of $75^{\circ}C>room\;temp>105^{\circ}C$ The breaking strength of two bath processed fabrics showed in the order of $105^{\circ}C>75^{\circ}C>room$ temp. Tearing strength showed in the order of $75^{\circ}c>105^{\circ}C>room$ temp. Abrasion resistances were in the order of $75^{\circ}C>105^{\circ}C>room$ temp. in one bath and two bath processes.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.34 no.5
• /
• pp.269-278
• /
• 2020

The purpose of this study is to report the effect of the Korean acupuncture treatment and Open Wet Dressing Therapy(OPWT) for pressure ulcer. From November 2015 to January 2020, 9 patients with 3rd or 4th graded pressure ulcer over 70 years of age who were admitted to a care hospital with underlying diseases such as cerebral infarction, brain hemorrhage, and Parkinson's disease were treated by acupuncture and OPWT. Photographs of lesions were used to evaluate the changes in condition of pressure ulcer. Acupuncture was performed 4 times a week along the border between the normal epidermal region and the pressure ulcer granulation tissue in contact with the pressure ulcer interface. OPWT to create a wet environment for wounds by washing the wounds 1-2 times a day with normal saline solution and covering them with food wrap was combined. In addition, for objective treatment progress evaluation, size, stage and condition of pressure ulcer were regularly monitored using the classification method of The National Pressure Ulcer Advisory Panel (NPUAP) according to the condition and depth of the damaged tissue and The Pressure Ulcer Scale for Healing(PUSH tool 3.0). After acupuncture treatment and OPWT, the pressure ulcer of patients was cured in as short as 66 days and as long as 274 days (average 170 days). This study shows that acupuncture treatment and OPWT were effective to treat pressure ulcer.