• Journal of the Korea Concrete Institute
• /
• v.29 no.4
• /
• pp.361-369
• /
• 2017

Setting time of cement-based materials can represent a developing strength in early-age mixture, and it can be used a significant parameter of high-performance concrete having various mix-proportions. Generally, initial and final setting time of concrete is measured by penetration resistance method that used a wet-sieving mortar mixture, therefore, it hardly represents the setting time of sound concrete including coarse aggregate. Recently, several nondestructive methods, such as ultrasonic velocity and impendence measurement, are proposed to evaluate the setting time of fresh concrete. This study attempts to measure an electrical resistivity using four-electrode method for evaluation of setting time in early-age cement-based materials. For this purpose, total 10 mixtures are prepared as different mix-proportions including chemical admixture. Based on the experimental results, two electrical parameters, such as initial electrical resistivity and rising time, are proposed to reflect a microstructure development by hydration of cement-based materials. As a result, proposed parameter is also discussed with the measured setting time by penetration resistance method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.1
• /
• pp.55-59
• /
• 1984

An organic compound fertilizer was manufactured using wet oxidation human waste as principal source of phosphorus and organic matter. The waste was treated with sulfuric and glutamic acids to increase the available and water-soluble $P_2O_5$ contents. The treatment of 0.1 N sulfuric acid with 24 hours curing was best way in recovering the maximum percentage of $P_2O_5$ originally in the waste. The particle size distribution of trial product varied considerably in the amount of glutamic acid used for granulation. The number of relatively large fertilizer particles was increased as the amount of glutamic acid was increased. The granule crushing strength was generally high in large granules in which 12.5 weight percent of glutamic acid were used for granulation. The trial product showed high moisture absorption due to its porous structure and chemical makeup.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.363-369
• /
• 2002

최근에 많이 사용되어지고 있는 치과용 접착제는 산 부식 후 수분이 있는 상태에서 적용하는 wet-bonding 술식을 많이 추천하고 있다. 하지만 self-etching primer의 경우 산부식과 priming 과정이 동시에 시행되고, 제조자들은 건조된 치아표면에 적용할 것을 추천하고 있다. 그러나 건조된 정도에 대하여서는 별다른 추천사항이 없으며. 수분이 self-etching primer에 어떤 영향을 미치는지에 대하여서는 별다른 연구가 이루어져 있지 않은 상태이다. 이에 본 연구에서는 치질 삭제 후 남아있는 수분이 self-etching primer의 레진 접착 강도에 어떤 영향을 미치는 지를 알아보고자 하였다. 발거한 대구치 96개를 이용하여 물기가 있는 상태에서 #600 사포로 표면을 연마하고, 법랑질 면을 노출시킨 군과 상아질을 노출시킨 군으로 분류 후, 30분 공기 중 방치 군 (1군), 5초 공기 건조 군 (2군), 1초 공기 건조 군 (3군), 솜으로 약간의 물기를 제거한 군(blot dry) (4군) 등 총 8개의 군으로 나누었다. Self-etching adhesive system인 Clearfil SE Bond primer를 20초간 적용하고, bonding제 도포 후 10초간 광중합 시행하였다. 접착제 처리한 치아면에 몰드를 고정한 후 Clearfil AP-X 복합레진을 2mm 충전하고, 40초간 광중합을 시행하였다. 24시간 후 전단 응력 결합강도를 측정하였으며, 그 결과는 다음과 같이 나타났다. 법랑질과 상아질 모두에서, 30분 건조군과 5초 공기건조군이 1초와 blot drying 군보다 높은 결합강도를 보였으며 통계학적으로 유의한 차이를 보였다(p＜0.05). 본 실험 결과에 의하면 self-etching adhesive system을 사용함에 있어서 법랑질과 상아질군 공히 건조된 상태에서 사용하여야 하며 수분의 존재시 치아와의 결합력이 감소하는 것으로 나타났다. 따라서 임상에서 접착제의 적용시 수분의 조절에 주의하여야 할 것으로 사료된다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.55-56
• /
• 2001

지난 수년간 유럽을 중심으로 Carbonate의 PSD (Particle Size Distribution)가 도공지 의 백색도, 불투명도, Coverage등에 미치는 영향에 대하여 많은 연구가 진행되어 왔다. 현재 국내의 Coating Pigment System 역시 Carbonate 위주로 구성되어 있으나, 입자 분포에 따른 실증적 연구가 선진국에 비하여 부족한 상태이다. 본 연구는 최근 유럽에서 사용 중인 Narrow PSD Carbonate가 도공지 품질에 미치는 영향을 검토한 것으로서, 특히 Multiple Coating에서의 도공층 구조변화와 그에 따른 백지물성 및 인쇄적성의 변화를 연구한 것이다. 실험의 Case는 Broad PSD CaC03와 Narrow PSD CaC03를 비 교하였 다 .. Color F Formulation은 Pre Color에서 #1 Clay 30 p따t와 각각 CaC03 70 p따t를 사용하였다. 그리고 바인더와 첨가제는 동일하게 사용하였다 .. Top color Formulation 또한 동일하 게 사용하였다. 코팅방식은 speed 450rrνmin, pre rod coating, top blade coating 방식 으로 CLC (Cy lindrical Laboratory Coater)를 사용하여 코팅하였다. 백지품질은 백색도, 평활도 ,광택도, 거칠음도, Bum Out Test와 Coverage( SEM 사 진 Z -direction) 등을 측정하였다. 인쇄품질은 인쇄 광택도, 인쇄 Picking strength와 2 도 인쇄 농도를 측정하였다. 백색도는 Narrow PSD CaC03를 사용한 것이 Broad PSD CaC03를 사용한 것 대비 약1% 우수하였다. 이것은 Narrow PSD CaC03를 사용한 것이 filter cake이 많이 open 되 어 있어 dewatering이 빠르고, Wet void volume이 증가되 어 부동화점 의 농도가 낮 아져 원지 층으로 침 투되 는 pigment가 작고 표층에 잔류하는 pigment와 void volume의 증가로 인해 기공층이 증가한 것으로 판단된다. 그리고, 백지광택도, 거칠음도 등 또한 Narrow PSD CaC03를 사용한 것이 우수하였 다. 이는 Pre color에서 coverage의 개선으로 top color층의 도공량 uniformity가 개선 된 이유라고 생각한다. 그러나 인쇄품질은 백지와 비교하여 차이가 없었다. 이것은 top 칼라 Formulation이 동일하고, 인쇄시 잉크흡수 거동은 top color 층에 주로 영향을 받기 때문이라고 판단 된다. 향후에는 인쇄품질의 향상을 위하여 Case 2의 CaC03 100% 사용가능성 및 Pre Color 는 Case 2로 고정하고, Top칼라를 변경하는 방법을 또한 생각할 필요가 있다고 판단된다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.10-16
• /
• 2015

Bio-binder is well known as a promising alternative binder for SB latex because it is eco-friendly and inexpensive, compared to synthetic latex. SB latex in top coating color was substituted with starch-based bio-binder to investigate its effects on the coating color and its coated paper properties. Bio-binder contributed to the increase of coating color viscosity, and the improvement of water retention. Most optical properties except opacity were deteriorated by the increase of bio-binder dosage. It was also found that the increase of bio-binder substitution in top coating color brought about the increase of roughness, and decrease of coated paper gloss, print gloss, dry and wet pick strength. However the stiffness and the ink set-off of the bio-binder coated paper were improved. Overall, mostly adverse effects of bio-binder on the properties of coating color and its paper were observed. Therefore, it is not recommended to use bio-binder as top coating color.

• Membrane and Water Treatment
• /
• v.2 no.1
• /
• pp.25-37
• /
• 2011

PES UF membranes containing silver were prepared to impart antibacterial properties for waste water treatment. Asymmetric membranes for antibacterial application were prepared from polyethersulfone (PES) and silver nitrate ($AgNO_3$) (PES/$AgNO_3$=15/2 by weight) solution in N-Methyl-2-pyrrolidone (NMP) via simple wet phase inversion technique. These membranes were characterized by polyvinylpyrrolidone (PVP) and polyethylene glycol (PEG) of different molecular weights (1000 ppm in water) at room temperature and on operating pressure of 5 bars. It was observed that the water flux of PES-$AgNO_3$ membrane is slightly lower than virgin PES but still increased linearly with the increment of pressure applied. The morphology of the resulting membranes was examined using Field-Emission Scanning Electron Microscope (FESEM) coupled with Energy Dispersive Spectroscopy (EDS). Elemental analysis using EDS proved that silver is successfully loaded on the membrane surfaces. Due to the success of loading silver on membrane surfaces, antibacterial activities were evaluated via agar diffusion method against Escherichia coli (E.coli) and Staphylococcus aureus (S.aureus) culture. By incorporating 2 wt% of silver nitrate, PES-$AgNO_3$ showed significant inhibition ring on both E.coli and S.aureus. Filtration of E.coli solution (OD 0.31) showed satisfactory rejection data with ~100% inhibition growth after 24 hours incubation at $37^{\circ}C$. Resultant membranes also exhibit better tensile strength (compared to virgin PES) up to 71% may be due to the suggested interactions. The residual silver during fabrication was measured using ICP-MS and result showed that the residual silver content of PES-$AgNO_3$ membrane was only ~1% of the original silver added in the polymer solution. These studies have shown that PES-$AgNO_3$ UF membranes are potential in improving the filtration in water treatment.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.445-449
• /
• 2009

According to the statistical data, stroke is about 13.9% of leading causes of death. Some herbal medicines including Paeonia lactiflora, Angelica gigas nakai and Prunus persica, etc., had been reported to be effective in preventing stroke and mBHT (Modified BoyangHwanoTang) was an advanced prescription used in Korean clinics. Orally disintegrating tablets (ODT) is useful for patients suffering from dysphagia, motion sickness, repeated emesis and mental disorders. Further, drugs exhibiting satisfactory absorption through the mucosa intended for immediate pharmacological action could be advantageously formulated in ODT. The aim of this study was to develop the most efficient ODT formulation of mBHT. Corresponding herbal medicines comprising mBHT were extracted with water for 3 hr at 95~$100{^{\circ}C}$ and then dried. mBHT extract was obtained with about 30% of yield. Subsequently, some pharmaceutical excipients such as spray-dried lactose, crospovidone, glyceryl behenate and/or cogrinded-treated arabia gum were used to achieve an immediate disintegration of mBHT ODT in oral cavity. The requirements of ODT with mechanical strength sufficient to stand the rigors of handling and capability of disintegrating within a few seconds in contact with saliva are indispensable. mBHT ODT prepared by the wet granulation method showed a disintegration time of below 30 sec.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.765-773
• /
• 2001

In In order to remove harmful trace elements such as $Co^{2+}$, $Ni^{2+}$ , $Cr_2O_7\;^{2-}$ from water, we synthesized AN-co-(MMA/IA) according to various mole ratio of monomers and spun by wet-spinning. And multi-functional PAN ion exchangers were prepared by hydrolysis. We observed structure, degree of functionalization, ion exchange capacity, distribution coefficient and mechanical properties for ion exchanger. Anion exchange capacity decreased in 4.5 ~ 4.2 meq/g with increasing of IA content and cation exchange capacity increased in 1.8 ~ 2.2 meq/g. Tensile strength of the ion exchanger increased up to 0.008 mol% IA content and appeared maximum value by 216$kg/cm^2$Distribution coefficient for AN-co-(MMA/IA) ion exchanger appeared maximum value for Co(II), Ni(II) in pH 5-6 range and for Cr(III) in pH 3-4 range. And the adsorption capacity was in the order of Cr(III) > Co(II) > Ni(II) for multicomponent in continuous process.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.106-112
• /
• 1990

The progress of oxidation of a porous silicon layer(PSL) was studied by examining the temperature dependence of the oxidation and the infrared absorption spectra. Thick OPSL(oxidized porous silicon layer). which has the same properties as thermal $SiO_{2}$ of bulk silicon, is formed in a short time by two steps wet oxidation of PSL at $700^{\circ}C$, 1 hr and $1100^{\circ}C$, 1 hr. Etching rate, breakdown strength of the OPSL are strongly dependent on the oxidation temperature, oxidation atmosphere. And its breakdown field was ${1\MV/cm^-2}$ MV/cm The oxide film stress was determined through curvature measurement using a dial gauge. During oxidation at temperature above $1000^{\circ}C$ in dry $O_{2}$, stress on the order of ${10^9}\dyne/{cm^2}{-10^10}\dyne/{cm^2}$ are generated in the OPSL.

• Computers and Concrete
• /
• v.19 no.5
• /
• pp.443-449
• /
• 2017

Taking high geothermal tunnels as background, the deformation of concrete for shotcrete use was studied by simulating hot-humid and hot-dry environments in a laboratory. The research is made up by two parts, one is the influence of two kinds of high geothermal environments on the deformation of shotcrete, and the other is the shrinkage inhibited effect of fiber materials (steel fibers, polypropylene fibers, and the mixture of both) on the concrete in hot-dry environments. The research results show that: (1) in hot and humid environments, wet expansion and thermal expansion happened on concrete, but the deformation is smooth throughout the whole curing age. (2) In hot and dry environments, the concrete suffers from shrinkage. The deformation obeys linear relationship with the natural logarithm of curing age in the first 28 days, and it becomes stable after the $28^{th}$ day. (3) The shrinkage of concrete in a hot and dry environment can be inhibited by adding fiber materials especially steel fibers, and it also obeys linear relationship with the natural logarithm of curing age before it becomes stable. However, compared with no-fiber condition, it takes 14 days, half of 28 days, to make the shrinkage become stable, and the shrinkage ratio of concrete at 180-day age decreases by 63.2% as well. (4) According to submicroscopic and microscopic analysis, there is great bond strength at the interface between steel fiber and concrete. The fiber meshes are formed in concrete by disorderly distributed fibers, which not only can effectively restrain the shrinkage, but also prevent the micro and macro cracks from extending.