• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.232-235
• /
• 2004

This study aims to manufacture non-sintering cement(NSC) by adding phosphogypsum(PG) and waste lime(WL) to granulated blast furnace slag(GBFS) as sulfate and alkali activators. This study also investigates the basic physical properties and hydration reaction of NSC, and evaluates its reusing possibility as construction material. Results obtained from this study have shown that GBFS was affected by $So_4^{2-}$ in waste PG and stimuli under wet condition, left slag components, created Ettringite and CSH gels, and eventually started being hydrated. These hydrated creations formed dense structures like CSH based on Ettringite and contributed in allowing the mortar to reveal high strength.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.25-40
• /
• 1997

This research was carried out to investigated the effect of base paper and latex binder on printability and obtical properties of coated paper. Especially, it examined the effect of th pH of vase paper surface and functional groups of latices on the interactions between coating color components and on the structure of coated layer. It was found that the behavior of coating color containing amphoeric latex depends on the pH in the boundary region between coating color and base paper. Thus, the coating color formulated with amphoteric latex formed bulky coating layer by inducing stronger interaction between paper surface and coating components than the coating color with anionic latex. The coated paper with amphoteric latex showed better optical properties (i.e.gloss and optical) and printability (i.e. ink receptivity, wet ink receptivity, and ink set off) than the conventional anionic latex in the acidic and alkaline paper. However, dry pick strength of the coated paper was less decreased. This result indicated that amphoteric latex could also be applied practically to the alkaline paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.93-97
• /
• 1999

Tobacco stalks are greatly produced as annual agricultural wastes. These residues are available approximately 70,000 tons per year. This study was performed to evaluate the potentials of tobacco stalks as a new resource for reconstituent tobacco sheet. Tobacco stalk was more lignified than cereal straws, and had similar chemical constituents to hardwood. Pulping yields by cooling at 170$^{\circ}C$ of dry and green tobacco stalks were 56.7% and 66.3% , respectively. Around 50$^{\circ}$SR freeness level of mixed pulp was adjusted by mixing more than 10% chemical pulp9CP) in the case of dry tobacco stalk and more than 15% CP with wet one. By immersing this handsheet in extracted cooking liquors, reconsitutent sheet contained about 0.28% of nicotines could be prepared. This sheet had enough strength properties for cigarette paper making . In conclusion, it was proved that tobacco stalk could be used to produce the reconstituent tobacco sheet.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.347-355
• /
• 2016

Purpose: With the advance of miniaturization of electronic products, stacked packages of high density semiconductors are commonly used. Potential failure modes and mechanisms of stacked packages are identified. Methods: Failure modes and mechanisms of thin chip stacked packages are determined through the categorization and failure analysis: delamination, non-wet, crack, ESD, EMI and the process related damages. Results: Those failure modes are not easy to find and require excessive amount time and effort for analysis and subsequent improvement. Conclusion: In this study, a method of estimating the failure rate based on the strength measurement is suggested.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.229-232
• /
• 2003

Recently, it is increased on the concern for the reuse of waste concrete because of the shortage of natural aggregate and the increase of waste concrete. And recycled coarse aggregate is used variously, but the existing wet method producted recycled fine aggregate has problems like the high price facilities, the long time progress of the work and recycled fine aggregate of poor. The aim of this study is to investigate the possibility of the method of dry producted high qualities recycled fine aggregate. The results of this study have shown that the possibility of the method of dry is certificated as the qualities of recycled fine aggregate satisfied the KS and the compressive strength of mortar was similar to plain.

• Journal of the Korean Ceramic Society
• /
• v.23 no.1
• /
• pp.13-20
• /
• 1986

Zirconia soild electrolytes containing 4~10mol% of yttria were prepared by wet-blending of oxides and rea-ction-sintering, Sinterbility and degree of stabilization were optimized for the development of oxygen sensor. Fracture strength thermal expansion coefficient electrical conductivity and galvanic potential were measured and discussed with respect to the amount of ytria addition phase transformation microstructure and degree of stabilization. It was found that sintering and stabilization occurred when the composition was designed to be near the boundary region of $ZrO_2-Y_2O_3$ binary system. In such away a good zirconia solid electrolyte suitable for oxygen sensor could be developed.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.426-428
• /
• 2015

The NGK suspension insulators are subjected in harsh environments in service above 40 years long time. The long term reliability of the insulators is required for both mechanical and electrical performances. This study describes some electrical performances according to KEPCO-standard. There was fail in electrical and mechanical performance test such as galvanizing, low-frequence wet flashover voltage, puncture and combine mechanical & electrical strength test. The NGK suspension insulators of 1968 were shown lower electrical and mechanical performance than those of 1979.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.11a
• /
• pp.103-106
• /
• 2003

Recently, it is increased on the concern for the reuse of waste concrete because of the shortage of natural aggregate and the increase of waste concrete. And recycled coarse aggregate is used variously, but the existing wet method producted recycled fine aggregate has problems like the high price facilities, the long time progress of the work and recycled fine aggregate of poor. The aim of this study is to investigate the possibility of the method of dry producted high qualities recycled fine aggregate. The results of this study have shown that the possibility of the method of dry is certificated as the qualities of recycled fine aggregate satisfied the KS and the compressive strength of mortar was similar to plain.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.42-45
• /
• 1996

A residue from the newsprint waste was investigated as a filler in adhesive for bonding southern pine plywood. The residue was prepared by drying the wet residue to 8% moisture content and grinding the dry material using a laboratory Wiley mitt with a 75-${\mu}m$(200-mesh) screen. The residue was compared to a commercial filler commonly used in structural plywood adhesives. A total of 48 three-ply panels. 12.7mm nominal thickness and 0.3 by 0.3 m in size, were fabricated at two press times(4 and 5 min) and three assembly times(20, 40 and 60 min). Evaluations of the residue were carried out by performance tension shear tests after two 4-hour boil accelerated aging tests on plywood. The test results included tension shear strength and estimated wood failure values. All plywood made with the residue filler were comparable to the control-bonded plywood. These results indicate that residue from the newsprint waste streams would be suitable as filler for plywood adhesives.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.15-19
• /
• 1996

To utilize the waste materials and develope wood adhesive from isolated bloods of slaughtered cow and pig and also to prevent water pollution, simple and rapid method of isolation and purification of plasma proteins from pig bloods with trichloroacetic acid(TCA) treatment was developed. Adding of TCA-precipitated blood powder to the phenol formaldehyde resin(PF) improved dry and wet strength of plywood and resulted in fast hot pressing times.