• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1155-1160
• /
• 2009

Poly(lactide) (PLA)-coated paperboards were prepared by solution coating and thermo-compression coating methods and their effect of coating on the packaging properties such as tensile, water resistance, water vapor barrier, and heat sealing properties was tested. Compared with uncoated control paperboard, tensile strength (TS) of PLA-coated paperboard increased profoundly (2.2-2.6 folds) with slight increase in elongation at break (E). Water absorptiveness (WA) of the paperboard decreased 74-170 folds and water vapor permeability (WVP) decreased 6.3-22.1 folds by coating with PLA, which indicates an increase in the hydrophobicity of the surface of paperboard. Compared with polyethylene (PE)-coated paperboard, both PLA-coated paperboard exhibited 2.3 time higher heat sealing strength. In addition, the PLA-coated paperboards showed equal or higher wet TS than PE-coated paperboard. All the test results showed that the paperboard coated by the thermo-compression coating method was similar to or better than those of coated by the solution coating method.

• Carbon letters
• /
• 제7권1호
• /
• pp.27-33
• /
• 2006

Carbon-ceramic composites were fabricated by using fly ash and PANOX fibers as reinforcement. Fly ash, because of its small size particles e.g. submicron to micron level can be effectively dispersed along with fibrous reinforcements. Phenolic resin was used as carbon precursor. Both dry as well as wet methods were used for forming composites. The resulting composites were characterized for their microstructure, thermal and mechanical properties. The microstructure and mechanical properties of composites are found to be dependent on type of the fly ash, fibrous reinforcements as well as processing parameters. The addition of fly ash improves hardness and the fibers, which get co-carbonized on heat treatment, increase the flexural strength of the carbon-ceramic composites. Composites with dual reinforcement exhibit about 30-40% higher strength as compared to the composites made with single reinforcement, either with fly ash as filler or with chopped fibers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.107-112
• /
• 1990

Chromatograms of asphalt cements were observed using high pressure - gel permeation chromatography (HP-GPC). The chromatogram characterzed profile of molecular size distribution of asphalt cements. Bituminous concretes using the asphalt cements were prepared in laboratory to measure mechanical properties, tensile strength (TS) and resilient modulus (MR), in dry and wet conditions. Three sources of AC-20 Asphalt cements and one aggregates were used for GPC test and strength test. Results of mechanical property tests and GPC tests were analyzed to evaluate correlation between those two results. Regression analysis showed strong correlation between a mechanical property and sliced percent areas of GPC profile. Mathematical models were developed for estimating mechanical properties of asphalt cement concrete based on HP-GPC data.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.53-55
• /
• 2013

Nitrite-Type hydrocalumite (calumite) is a material that can provied a self-corrosion inhibition function to the reinforce concrete. In this study, bisphnol A·F type epoxy-midified mortars without hardner contaning calumite is prepared with various polimer-binder ratios, calumite contents and tow types of curing condition, and tested for flexural and compressive strength tensile strength and corrosion-inhibition. As a result, in the case of wet/dry curing condition, strengths of bisphnol A·F type epoxy-modified mortars without hardener contaning calumite is inclined to decrease with increasing of polymer-binder ratio and calumite content. However, dry cured specimens are slightly improved by using bisphnol A·F type epoxy resin. Finally, regardless of polymer-binder ratios and calumite contents, corrosion-inhibition of bisphnol A·F type epoxy-modified mortars without hardener containing calumite is superior than that of unmodified mortar.

• 한국건축시공학회지
• /
• 제6권4호
• /
• pp.93-98
• /
• 2006

Admixture materials are used in mixing concrete or mortar to improve quality and performance of the concrete. This study examines the potential use of talc as a substitute for cement, the benefits of recycling waste resources for economical efficiency and quality improvement of concrete. The test was carried out by replacing the plain mix with fine grains of talc at the rate of 10%, 20%, and 30%. Talc was divided into three groups depending on the degree of pulverizing. For wet concrete, porosity, slump, bleeding per unit, and setting time by penetration resistance were measured; similarly, for dry concrete, strength and watertight Property were tested. Test results showed that the amount of bleeding and setting time could be shortened, but the strength and watertight proofing severely deteriorated. However, at the replacement rate of 10%, talc showed equal performance with the plain at all degrees of pulverization, which suggests its potential use as admixture material.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1398-1406
• /
• 2008

This paper describes the electrical breakdown characteristics of broken toughened glass stem insulators by comparing with those of sound ones. The broken toughened glass stem insulators were taken from the electric railway field. According to the international standards, the sound and broken toughened glass stem insulators were tested in electrical strength. In the test, the power frequency voltage and the impulse voltage with a standard waveform were applied to the insulators. The power frequency voltage tests were carried out under both dry and wet condition and the impulse voltage tests under only dry condition. The acquired results were compared one another and discussed in electrical breakdown characteristic by analyzing the flashover progress pictures. As a result, the electrical strength of the broken toughened glass insulators was acquired and the processes of the surface breakdown on the toughened glass insulators were confirmed.

• 한국지반환경공학회 논문집
• /
• 제11권9호
• /
• pp.5-14
• /
• 2010

본 연구는 성토지반이나 사면에서의 강우 침투 시 포화도 변화에 따른 전단강도 특성을 규명하고자 대전지역 도로공사현장을 대상으로 성토재로 쓰이는 화강풍화토에 대하여 포화도 변화에 따른 전단강도특성을 분석하였다. 다짐함수비를 달리한 시료에 대해 직접전단시험을 실시하여 분석한 결과 최적함수비와 건조측 다짐함수비에서 점착력과 전단저항각이 가장 크게 나타났으며, 다짐함수비가 습윤측으로 갈수록 점착력이 감소하는 경향을 보였다. 또한, 다짐함수비별 시료에 대하여 포화도 변화에 따른 전단특성을 연구한 결과 침투한 물에 의해 포화도가 증가할수록 점착력은 50% 이상 감소하는 경향을 보였으나, 상대적으로 전단저항각의 감소폭은 $1{\sim}2^{\circ}$정도로 작았다. 또한, 잔류전단강도정수에 대한 포화도 변화의 영향은 실용적 차원에서 효과를 기대하기가 어려울 것으로 판단된다. 즉, Mohr-Coulomb의 파괴규준에서 포화도 변화가 잔류전단강도 변화에 미치는 영향은 미미한 것으로 판단된다.

• 한국도로학회논문집
• /
• 제3권3호
• /
• pp.135-146
• /
• 2001

기존의 교면포장공법의 근본적인 문제점으로 인해 새로운 교면포장 공법이 점차 부각되고 있는 실정이며, 새로운 교면포장 공법으로 연구되고 있는 것이 라텍스 개질 콘크리트를 이용하는 것이다. 따라서, 본 연구에서는 신설 콘크리트 교량 교면포장으로 덧씌우기된 LMC의 강도발현 특성과 덧씌우기 될 때의 기존콘크리트와의 부착특성을 파악하고자 하였다. 이런 연구를 위해 라텍스 혼입률에 따른 라텍스 개질 콘크리트의 압축강도와 휨강도, 그리고 기존콘크리트와의 부착강도를 측정하였다. 본 연구결과 라텍스 혼입량 증가로 폴리머 입자들의 볼베어링 작용, 연행된 공기 및 라텍스 안에 있는 계면활성제의 분산작용에 의하여 LMC의 작업성과 휨강도를 증가시킨다는 사실을 파악 할 수 있었고, LMC와 기존 콘크리트 슬래브와의 부착강도는 크게 증진함을 알 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.25-28
• /
• 2017

In superconducting coil applications particularly in wet wound coils, coated conductor (CC) tapes are subjected to different type of stresses that could affect its electromechanical transport property. These include hoop stress acting along the length of the CC tape and the Lorentz force acting perpendicular to the CC tape's surface. Since the latter is commonly associated with the delamination problem of multi-layered REBCO CC tapes, more understanding and attention on the delamination phenomena induced in the case of coil applications are needed. Difference on the coefficient of thermal expansion (CTE) of each constituent layer of the CC tape, the bobbin, and the impregnating materials is the main causes of delamination in CC tapes when subjected to thermal and mechanical cycling. In the design of degradation-free superconducting coils, therefore, characterization of the delamination behaviors including mechanism and strength in the multi-layered REBCO CC tapes becomes a critical issue. Various trials to increase the delamination strength by improving interface characteristics at interlayers have been performed. In this study, in order to investigate the influences of laser cleaning and Ag annealing treated at the substrate side surface, transverse tensile tests were conducted under different sample configurations using $4.5mm{\times}8mm$ upper anvil. The mechanical delamination strength of differently processed CC samples was examined at room temperature (RT). As a result, the Sample 1 with the additional laser cleaning and Ag annealing processes and the Sample 2 with additional Ag annealing process only showed higher mechanical delamination strength as compared to the Sample 3 without such additional treatments. Sample 3 showed quite different behavior when the loading direction is to the substrate side where the delamination strength much lower as compared to other cases.

• 한국수산과학회지
• /
• 제9권4호
• /
• pp.293-298
• /
• 1976

관통형 그물감의 강도를 추정하기 위한 기초로서, 그물실의 강도가 관통마디에서 감소하는기구 및 주름을 주었을 때의 관통마디의 강도를 조사하고, 이들 강도를 매듭의 강도와 비교하였다. 실험에는 vinylidene(mono-f.), polyester(multi-f.) 및 nylon(multi-f.와 spun) 그물감이 사용되었으며, 관통마디의 시료는 이들 그물감을 계단하여 준비하였고, 또한 매듭은 이들 그물감의 다리로 만들어졌다. 실험 결과, 그물실의 강도가 관통마디에서 감소하는 원인은 마디에서의 편자사간의 마찰력으로 인해 마디의 첨단, 즉 마디와 다리와의 경계에 위치한 섬유들이 장력에 의해서 재분포하는데 마찰력만큼 저항을 받게 되고, 따라서 마찰력만큼 강도가 감소하는 것이라고 해석되었다. 그러나, 그 감소의 정도는 filament 그물실의 경우 $5\%$ 이내이고, spun 그물실의 경우는 $5\~10\%$ 정도여서, 마디의 감도는 근사적으로는 그물실의 강도로 표시해도 좋을 것 같았다. 주름을 주었을 애의 관통마디의 강도는 연접하는 두개의 다리가 이후는 각 $\varphi$가 $90^{\circ}$에서 최소치를 가지는 포물선상에서 변화하는 경향이었지만, 그 최소치는 강도의 감소가 가장 큰 습막의 spun 실에서 $\varphi$가 $0^{\circ}$때의 강도의 약 $94\%$이어서, filament 그물실의 관통마디의 강도는 $\varphi$의 변화에 관계없이 거의 일정하다고 간주해도 좋을 것으로 추찰되었다. 따라서, filament 그물실의 관통마디의 강도는 주름을 준 경우이거나 안준 경우거나를 불문하고, 그물실의 강도로 표시해도 좋을 것 같았다. 관통마디의 강도를 매듭의 강도와 비교한 결과, 매듭의 강도는 관통마디의 강도의 약 $70{\pm}5\%$로 나타났다.