• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.8-17
• /
• 2005

WCT (Wet compaction test) is a new fiber evaluation method developed recently by Seo and its test results can be used as a predictor for pulp quality and its paper property Bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) were used for the furnishes to be tested by WCT We compared the WCT results to conventional fiber evaluation tests such as WRV (Water Retention Value), free ness, and fiber length in this study, and found that WCT always gave better regression coefficients in relation to pulp quality (drainage), and paper properties (density, tensile, tear, and burst strength). WCT may be used on-line in papermachine.

• 박물관보존과학
• /
• 제6권
• /
• pp.73-83
• /
• 2005

지류문화재의 보존처리과정에서 실시되는 습식크리닝의 영향을 알아보기 위해 습식크리닝 전과 후의 물성변화를 관찰하였다. 조사방법으로 고지와 현대지 7종을 각각 습식크리닝 전과 후의 구조적, 광학적, 강도적 성질의 변화를 측정하였다. 그 결과 습식크리닝은 지류문화재의 물성변화를 일으키고 특히 안료, 먹, 염료 등의 구성성분을 약화시킬 수 있음을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.463-466
• /
• 2011

Wet foams formed through direct foaming were stabilized using various concentrations of amiphiphilic particles that could control pore size and porosity. These porous materials showed moderate strength upon compression with high porosity. Bubble size and wet foam stability were tailored by amphiphile concentration, particle concentration, contact angle, and pH of the suspension to obtain crack-free porous solid after sintering. Closed and open pores were obtained with sizes of 30~300 ${\mu}m$ and porosities of over 80%.

• Journal of Welding and Joining
• /
• 제2권2호
• /
• pp.62-69
• /
• 1984

In this study, cold crack susceptibility of high strength steel (ABS EH32 Steel) welded zone with shielded metal are welding was investigated by tensile restraint cracking test method. Effects of diffusible hydrogen content on root cracking, lower critical stress, crack initiation and fracture mode, hardness value distribution of welded zone and fractograph were mainly investigated. Following conclusions are made: 1. In the view of the lower critical stress level, wet electrode, containing much diffusible hydrogen content shows lower value than dried electrode. 2. Hardness value(Hv 5kg) in Heat Affected Zone of wet electrode is higher than that of dried electrode caused by hydrogen embrittlement. 3. In the case of wet electrode, root crack is initiated and propagated in Heat Affected Zone and then propagated to weld metal, but using of dried electrode, root crack is initiated in Heat Affected Zone and propagated to weld metal without propagating in HAZ. 4. For wet electrode, quasi-cleavage fracture mode is majorly observed on the fracture surface of HAZ and partially of weld metal due to hydrogen embrittlement.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.1-7
• /
• 2012

The increase of OCC solid content after wet pressing will save drying energy greatly. We applied spacers, which used to increase draining rate and bulk in fiber furnishes, to increase the OCC solid contents. MDF fibers (fibers for making medium density fiberboard) and diatomaceous earth were used as spacers, and added 10% by weight to the OCC fiber furnish. Application of high wet pressing pressure to the mixed furnish of spacers and refined OCC did not deteriorate bulk and drainage rate, but their solid contents were increased to 0.5-1.5% without loss of compressive strength when compared to those of unrefined OCC, which is the furnish normally used for mill commercial practice. It is believed that the spacers caused the rate of solid content increase faster in the mixed furnish with OCC at high wet pressing pressure area than the unrefined OCC furnish did. Little amount of starch addition (0.5%) to the spacers helped to keep the strength properties.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.305-312
• /
• 2002

To estimate the effects of lime and cement on the surplus soil, the engineering properties of the marine deposited clay and the fresh water clay were analyzed. The specimen were prepared under several curing conditions, namely, underwater curing, wet condition curing and underwater curing after heating. Unconfined compression strength were estimated after 7, 14, 28 and 60 days, respectively. The strength were steeply increased with time until first 14 days. Specially the increase of the strength of the heated soil were large.

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.79-87
• /
• 2008

경제가 성장함에 따라 도시 곳곳에 인공구조물이 건설되면서 녹지공간이 줄어들고 있다. 녹지공간의 축소는 도시의 열섬현상, 지구온난화 등을 가중시키고 삶의 질을 저하시키는 등의 문제를 가져왔다. 최근 이러한 문제를 해결하기 위해 건물의 옥상과 같이 버려진 공간을 이용한 옥상녹화에 관한 연구가 많이 이루어지고 있다. 옥상녹화 시 가장 중요한 문제로 대두되는 것은 건물에 미치는 토양의 하중으로 건물에 부하되는 하중을 줄이기 위해 경량성 녹화소재가 필요하게 되었다. 본 연구에서는 경량성 소재인 폐목재칩과 폐지 슬러리를 이용하여 녹화용 식생기반재를 제작하였다. 폐목재칩과 폐지 슬러리의 사용은 자원을 재활용한다는 의미에서도 의의를 가진다. 폐목재칩과 폐지 슬러리를 60 : 40으로 혼합하고 습윤지력증강제의 처리를 달리하였고, 보수력을 위해 표면사이즈제를 처리하여 각 처리 조건에 따라 물리적 특성과 화학적 특성을 평가하였다. 실험결과 15%의 습윤지력증강제를 첨가한 식생기반재가 습윤 시 최대의 강도를 보였고, 표면사이즈제를 도포하지 않은 식생기반재에서는 도포한 것에 비해 높은 수분증발량을 보여 표면사이즈제가 보수력을 높이는데 효과적임을 알 수 있었다. 흡수 시 두께변화는 1 mm 이하로 그 변화가 적어 치수안정성이 우수한 소재임을 알 수 있었다. 식생기반재의 pH는 7.6~8.25로 중성에서 약 알카리성으로 나타났다.

• 항공우주기술
• /
• 제6권1호
• /
• pp.1-6
• /
• 2007

본 연구에서는 상온에서 수작업으로 함침/경화시킨 일 방향 glass/epoxy 복합재료 적층판의 설계압축강도 값을 제시하고 있다. 총 39개의 시편으로부터 측정된 압축강도 값은 two-parameter Weibull 분포를 따른다고 가정하였다. MIL-HDBK-17F에 제시된 방법과 절차에 따라 동일형상의 복합재료 시편에 대해 구한 B-Basis 값과 A-Basis값은 각각 평균 압축강도의 82.6% 및 65.9%로 확인되었다. 항공기 주익의 스파 Cap에 동일 복합재료를 적용할 경우를 고려하여 B-base 값의 50%를 설계압축강도 값으로 산정하였다.

• 한국도로학회논문집
• /
• 제20권2호
• /
• pp.27-34
• /
• 2018

PURPOSES : It is necessary to prevent premature failure of concrete pavements caused by durability problems. The purpose of this study was to find factors affecting the durability of concrete pavements, and suggest improvement methods for existing concrete mix design. METHODS : Factors influencing durability were derived from laboratory test data for common field failure conditions and main properties of concrete cores taken from the field. The improvement of concrete properties was investigated by evaluating the performance of existing and proposed mix proportion designs and curing methods. RESULTS : The compressive strength and the absorbing performance of the low Blaine cement and the high-strength mixture were better than those of the Type I cement. Wet curing showed better compressive strength, elastic modulus, coefficient of thermal expansion, and absorption performance than air curing or compound curing. As a result of comparing concrete cores collected in the field, the sections with good durability showed good performance in terms of resistance to chloride ion penetration, absorption, and initial absorption rate. CONCLUSIONS : The absorption performance was considered as a possible foactor affecting durability of cement concrete pavements as a result of field core tests. In order to improve the durability of the pavement concrete, it is necessary to improve the existing mixtures and curing methods.

• 한국의류학회지
• /
• 제30권8호
• /
• pp.1323-1332
• /
• 2006

Lyocell is a regenerated cellulose fiber manufactured by an environmentally-friendly process. Since the fiber has more crystalline region compared to rayon, lyocell shows higher wet-strength than rayon. Although fibril generation of lyocell is lower than that of rayon because of the reason, the fibril generated during the wet process deteriorates the smooth look and soft touch of the fabric. The efficient way to remove the fibril yet retain the strength property was investigated in this work. In order to scour and remove the fibril from the fabric, cellulase enzymes were introduced and the traditional scouring was carried to be compared. Weight loss, dye-ability, and strength of treated fabric were measured after the treatments. Scanning electron microscopy was used to observe the surface of the fiber. Among the cellulases used in this work, Denimax 992L showed the best results for removal of fibril with low weight loss and tensile strength loss. The optimal conditions for the enzymatic treatment could be chosen depending on a characteristic for final purpose of the lyocell product.