• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.407-408
• /
• 2009

건조수축은 콘크리트 구조물의 내구성에 큰 영향을 미친다. 이러한 건조수축을 예측하기 위하여 여러 가지 모델들이 실험적으로 제시되고 있다. 본 연구에서는 콘크리트 강도와 양생조건에 따른 건조수축을 측정하여 대표적인 모델코드와 그 특성을 비교하였다. 실험결과 물-시멘트비가 작아질수록 건조수축량은 감소하였고, 4주간 습윤 양생한 경우 전체수축이 크게 저하하였다. 예측 모델과 실험결과를 비교할 때 EC2 모델과 가장 잘 일치하였다.

• 한국염색가공학회지
• /
• 제10권2호
• /
• pp.45-54
• /
• 1998

This study surveys relation between thermal shrinkage and thermal stress properties after process simulation of heat treatment with various PET filament yarns. For this purpose, 12 kinds of regular yarns and POY, 6 kinds of DTY and 5 kinds of composite yarns were experimented for investigating step thermal shrinkage, total thermal shrinkage and total thermal stress and maximum thermal stress temperature. Thermal stress and shrinkage of the various specimens treated with wet and dry heats were analysed and discussed with the conditions of heat treatment. finally, relationship between thermal stress and shrinkage of the various PET filaments such as regular yarns, POY, DTY and composite yarns were investigated with the PET filament characteristics.

• 한국의류학회지
• /
• 제4권1_2호
• /
• pp.25-33
• /
• 1980

The studies on shrinkage and characteristics of the weft knitted fabrics were investigated under the various dry and wet treating conditions. Various relaxation values were found out according to treating conditions. The characteristics of knitted fabrics such as shrinkage rate, thickness, spirality, elongation and recovery were also measured. The used knitting yams were OE (open-end) cotton and POY (pre-oriented yarn)-DTY (draw textured yam) polyester. The conclusions obtained in this study are as follows. 1. In case of dry relaxation little change of Ks values was seen with increasing time after 48 hours. So it was found that relaxation shrinkage of dry relaxation reached its maximal state in about 48 hours. 2. In case of wet relaxation, higher Ks values were observed, in comparision with those of dry one and higher shrinkage rates were also observed. But when experimental temperature was constant, sudden marked increases in Ks values and shrinkage rates appeared through the initial 4 hours, and after that time little change was seen in them. 3. As Ks value increases, thickness also increased. But thickness showed to some degree stability around Ks value 23. 4. As Ks value increases, spirality values also increased gradually. But little change of spirality values was observed above a certain Ks values (cotton 22.5, polyester 21.5). 5. As Ks value increases, the elongation decreased under a certain load, and the recovery was random.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.61-70
• /
• 2010

This effects of drawing conditions on the physical properties of the drawn worsted yarns were investigated. The drawn worsted yarns were made on the yarn drawing system with various drawing conditions such as concentration of reducing agent, draw ratio, setting time of drawn yarn and concentration of oxidizing agent. The dry and wet shrinkage, irregularity(CV%), thin and thick part, hairiness and abrasion resistance of these various specimens were measured and discussed in terms of various drawing conditions.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.289-293
• /
• 1999

This research was performed to evaluate the longitudinal length change ratio of concrete used the expansive admixture. As the results of this study, the compressive strength was shown the highest value at the used 10% expansive admixture both of the dry and wet curing condition. And the length change ration was shown higher 0.0316% and 0.0529 % than that of control in wet and dry curing condition. But this value was not enough to recover the shrinkage occuring by dry shrinkage. According to this study , we have obtained 10% on normal portland cement concrete as the optimum replacement ration of expansive admixture.

• 한국염색가공학회지
• /
• 제16권6호
• /
• pp.35-43
• /
• 2004

This study surveys the physical properties of ATY produced with FDY and POY. ATY is made with 70d Nylon FDY and 80d Nylon POY using AIKI air jet texturing machines, respectively. The processing parameters such as air pressure and yam speed are varied, and air pressure is varied ranging with 8.5bar, l0.5bar and 1l.5bar, and yarn speed is varied ranging with 400m/mim, 450m/mim, and 500m/min. The various physical properties of ATY made by POY and FDY denier, wet shrinkage, dry shrinkage, tensile properties, thermal stress and instability are measured and discussed with air pressure and yam speed. The shrinkage simulation of ATY is performed for analysing the process shrinkage on the dyeing and finishing processes.

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.444-451
• /
• 2013

This paper surveys the physical properties of aramid and aramid/nylon hybrid air-jet textured yarns(ATY) for protective garments according to wet and dry texturing conditions. Aramid and nylon filaments were used to make two kinds of para-aramid ATY and four kinds of aramid/nylon hybrid ATY with dry and wet treatments. The analyzed physical properties of six specimens (made on the ATY machine) are as follows. The tenacity and initial modulus of aramid and aramid/nylon hybrid ATY decreased with the wetting and breaking strain; however, the yarn linear density of aramid and hybrid ATY increased with wetting treatment. The dry and wet thermal shrinkage of the hybrid ATY increased with wetting. The stability of aramid and hybrid ATY also increased with wetting. The physical properties of core/effect type hybrid ATY showed significantly more change than the core type hybrid ATY and the physical properties of nylon/aramid core/effect hybrid ATY showed significantly more change than the of aramid/nylon core/effect hybrid ATY. A higher bulky and breaking strain of hybrid ATY require ATY processing conditions of nylon on the core part with wetting and aramid on the effect part. ATY processing conditions for nylon and aramid on the core part with wetting are required for a higher tenacity and modulus. ATY processing conditions of nylon and aramid on the core with no wetting are required for a low thermal shrinkage.

• Fibers and Polymers
• /
• 제5권1호
• /
• pp.25-30
• /
• 2004

The present paper reports the impact of thermal treatment on the characteristics of core-sheath type hybrid technical yarns. The core-sheath type hybrid yams are prepared using DREF-III technology. Polyester and glass multifilaments are used as core components whereas the cotton and polyester staple fibers are the sheath components wrapped around the core filament with different proportions to form a hybrid structure. The thermal treatment is carried out both in dry and in wet state under relaxed condition and the thermal shrinkage, sheath-slipping resistance and tensile and bending properties of hybrid yarns have been studied. Thermal treatment markedly increases the thermal shrinkage and sheath-slipping resistance of hybrid yarns with polyester multifilament in core, but insignificant effect for yarns with glass multifilament in core. Breaking elongation of hybrid yams with polyester multifilament in core increases with treatment temperature. The hybrid yarns with glass multifilament in core are least affected by thermal treatment.

• 한국산업융합학회 논문집
• /
• 제16권2호
• /
• pp.47-52
• /
• 2013

Aim of this study is to investigate the dimensional and shrinkage characteristics of the weft knitted fabrics with Polylactic acid(PLA) knitted yarn. This PLA knitted yarn was made of the biodegradability fiber. The structure of weft knitted fabrics that was utilized for this study is the plain stitch, which is the most basic structure among all weft knitted fabrics. As the stitch length is shorter, the stitch density, courses density, and wales density are more increasing. The stitch density increased as pre-treatment process and dyeing process progressed. On the contrary, the heat setting process made it decreasing. The MR(Machine Relaxation) and DR(Dry Relaxation) standard area shrinkage were increasing as wet process progressed and as the stitch lengths are long.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.68-75
• /
• 2001

Tensile and shrinkage characteristics of DTY, EDY and Macel were investigated experimentally. The drawn textured yarn(DTY) made by an existing belt type false twist and the elastic drawn textured yarn(EDY) made by non-torque false twist method modified from the belt type one. Macel was the yarn which had drawn and un-drawn arrangements. The tenacity of EDY had lower value than that of DTY. EDY had higher strethch than that of DTY. Especially Macel yarn had higher stretch than that of DTY compared with the same diameter of yarn. With time course behavior the tenacity and elongation of DTY and EDY had stabled tendency without variation. Before scouring Process, the wet and dry shrinkage patio of EDY load higher value than that of DTY. However, they decreased artier the process. At the same time, the stretch characteristic of EDY was significant as the diameter of yarn became higher.