• Journal of Conservation Science
• /
• v.12 no.1 s.15
• /
• pp.71-82
• /
• 2003

The paper relics excavated from the 4th excavation of the historical spot No.259 Seonwon temple area were analyzed and conserved. Because these works remained folded, the most important conservation treatment was a separation. This process depended on the state of the works: dry state works were separated using Gore-Tex chamber and the filtrated water, wet state works were separated through vacuum freeze drying method. Analyses of the paper relics performed were examination on the paper to find its distinction, binocular microscope and SEM on fiber, and XRF on character ingredient. This study presumed the times though $C^{14}$ dating of these works. The works were able to be classified through analysis and conservation treatment. This separation made lost part of the works conserve an archetype. This study presented the application of conservation methods on the paper relics which are in the bad condition and obtained information through carbon dating of it.

• The Korean journal of internal medicine
• /
• v.33 no.6
• /
• pp.1137-1142
• /
• 2018

Background/Aims: This study tested the hypothesis that prolonged low-dose cyclophosphamide (CTX) treatment after pulse therapy attenuate paraquat (PQ)-induced lung injury in rats. Methods: PQ (25 mg/kg) was administered intraperitoneally to induce PQ-intoxicated rat model. The rats were randomly divided into four groups: control group (1 mL/day saline solution for 14 days), PQ group (1 mL/day saline solution for 14 days after PQ exposure), pulse group (15 mg/kg/day CTX in 1 mL of saline solution for 2 days and subsequent 1 mL/day saline solution for 12 days), and prolonged low-dose group (15 mg/kg/day CTX in 1 mL of saline solution for 2 days and subsequent 1.5 mg/kg/day CTX in 1 mL of saline solution for 12 days). A 14-day follow-up was conducted to determine the survival rat, and lung hydroxyproline (HYP), wet-to-dry weight ratios (W/Dc) and histopathological changes were evaluated. Results: Results showed similar survival rate (55% vs. 50%, p > 0.05) between prolonged low-dose and pulse groups. Lung W/Dc ($4.94{\pm}0.38$ vs. $5.47{\pm}0.28$, p < 0.01), HYP ($3.34{\pm}0.29{\mu}g/mg$ vs. $3.65{\pm}0.19{\mu}g/mg$, p < 0.001), and fibrosis score ($2.69{\pm}0.84$ vs. $3.13{\pm}0.63$, p < 0.05) were lower in prolonged low-dose group than those in the pulse group. Conclusions: These findings suggested prolonged low-dose CTX treatment after pulse therapy could attenuate PQ-induced lung injury in rats.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.20-26
• /
• 2013

This study focused on how it affects the surface roughness of work piece in cutting SCM415 steel, widely used steel in industry, by TiCN and TiN tools. Following conclusion was drawn from several experiments. The surface roughness of heat treated workpiece was better than that of non heat-treated materials. Moreover, the roughness of surface roughness(Ra 0.25) on feeding rate of 0.05 was better when it was in wet process, rather than dry process. As the feeding rate increases, TiCN coating tool shows better roughness of surface than TiN tool. Also, in heated treatment, TiCN coating tool shows the least straightness dimension deviation at feeding rate of 0.05, 0.15mm/rev, and concave-like R shape appears by the feeding rate orders of 0.05, 0.15, 0.1, 0.125 and 0.075mm/rev.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.321-332
• /
• 2013

Namwon Singyeri Maaeyeoraejwasang (Rock-Carved Seated Buddha Statue) is composed mainly foliated granite and is different metamorphic grade and weathering degree on rock location. As the results of deterioration evaluation, upper part of the buddha statue was estimated that granularity decomposition was serious and rock strength was lower than lower part. Furthermore organism assessed most effect of among weathering factors. Chl. a amount of organism species were calculated $0.2{\mu}g/cm^2$ of crustaceous lichen, $1.1{\mu}g/cm^2$ of foliose lichen, $2.3{\mu}g/cm^2$ of bryophyte. Organism was taken treatment in order of amount of Chl. a and pre-cleaning, dry cleaning, wet cleaning in sequence. It should be establish conservation plan that strengthening in consideration of lithology characteristics and setting in good condition environment to conserve long-term of Maaeyeoraejwasang.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.3
• /
• pp.177-190
• /
• 2019

The purpose of this study was to analyze the effects of sewerage facilities through I/I analysis by rainfall by selecting areas where storm overflow diverging chamber is remained due to the non-maintenance drainage equipment when the sewerage system was reconstructed as a separate sewer system. Research has shown that wet weather flow(WWF) increased from 106.2% to 154.8% compared to dry weather flow(DWF) in intercepting sewers, and that the WWF increased from 122.4% to 257.6% in comparison to DWF in storm overflow diverging chamber. As a result, owing to storm overflow diverging chamber of partially separate sewer system with untreated tributary of sewage treatment plant, rainfall-derived infiltration/inflow(RDII) has been analyzed 2.7 times higher than the areas without storm overflow diverging chamber. Meanwhile, infiltration quantity of this study area was relatively higher than that of other study areas. Therefore, it is necessary to reduce infiltration quantity through sewer pipe maintenance nearby river. Drainage equipment maintenance should be performed not to operate storm overflow diverging chamber in order to handle the appropriate sewage treatment plant capacity for rainfall because it is also expected that RDII due to rain will occur after maintenance. In conclusion, it is necessary to recognize aRDII(allowance of rainfall-derived infiltration/inflow) and to be reflected it on sewage treatment plant capacity because aRDII can occur even after maintenance to the complete separate sewer system.

• Korean Journal of Plant Resources
• /
• v.21 no.2
• /
• pp.144-147
• /
• 2008

This study was conducted to clarify the characteristics of seed germination and to promote the germination rate in Pollia japonica Thunb. that was pointed to protect by the Office of Forestry in 1997. It was better the germination rate and the growth of in the light than those of in the darkness. The seed germination of Pollia japonica showed the highest germination rate at $20^{\circ}C$ any other treated temperature. To increase the germination rate of Pollia japonica, it was conducted priming treatments and storage treatments at $4^{\circ}C$. Priming treatments using 1% NaOH, 1% KOH for 30min were effective compared to control, but soaking of 100mg/L GA3 for 24 hours, 1% NaOCl for 30min were not useful. It was higher in wet storage than in dry storage. Wet storage of seeds showed a germination rate with 95.3% in 90-day treatment, which improved 55.3% than dry storage in 90-day.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.37-43
• /
• 2008

The research attempted to develop an eco-friendly wood adhesive based on vegetable oil (soybean oil), the renewable and sustainable natural resources, using ozonification technology for the chemical structure modification. The soybean oils (SBO) were reacted with $O_3$ at the rate of 7.13 g/h for different times, 15 minutes, 30 minutes, 60 minutes, and 120 minutes. Modified chemical structure of the ozonized SBOs were examined by Fourier transform Infrared (FT-IR) spectrum. The FT-IR spectrum of SBO had an absorbance peak at $3010cm^{-1}$ that is the characteristic peak of the unsaturated double bonds. As ozone treatment time increased, the peak of the double bond was disappeared and aldehyde or carboxyl peak appeared at $1700cm^{-1}$. The dry, wet, and cyclic boiling bond strengths of the ozonized SBO mixed with polymeric diphenylmethane-4, 4-diisocyanate (pMDI) were also investigated. In the dry shear test, all strengths met constantly the standard requirement of $7.0kgf/cm^2$ (KS F3101 2006). The bond strengths gradually increased with increasing ozone treatment time. The highest strength showed at 60 minutes ozone treatment and decreased values at 120 minutes. In the cyclic boiling shear test, 30, 60 and 120 minutes exceeded the standard requirement.

• Membrane and Water Treatment
• /
• v.1 no.3
• /
• pp.215-230
• /
• 2010

Poly(vinylidene fluoride-co-hexafluoropropylene), PVDF-HFP, hollow fiber membranes were prepared by the dry/wet spinning technique using different polyethylene glycol (PEG) concentrations as non-solvent additive in the dope solution. Two different PEG concentrations (3 and 5 wt.%). The morphology and structural characteristics of the hollow fiber membranes were studied by means of optical microscopy, scanning electron microscopy, atomic force microscopy (AFM) and void volume fraction. The experimental permeate flux and the salt (NaCl) rejection factor were determined using direct contact membrane distillation (DCMD) process. An increase of the PEG content in the spinning solution resulted in a faster coagulation of the PVDF-HFP copolymer and a transition of the cross-section internal layer structure from a sponge-type structure to a finger-type structure. Pore size, nodule size and roughness parameters of both the internal and external hollow fiber surfaces were determined by AFM. It was observed that both the pore size and roughness of the internal surface of the hollow fibers enhanced with increasing the PEG concentration, whereas no change was observed at the outer surface. The void volume fraction increased with the increase of the PEG content in the spinning solution resulting in a higher DCMD flux and a smaller salt rejection factor.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.977-986
• /
• 1996

The uncertainty of rains at the onset of wet season (WS) and the drought risk involved hinder growing more than one rainfed lwoland rice crop per year. Establishing transplanted rice well into the WS leaves insufficient moisture in the soil for subsequent crop. Rice establishment early in the season gives the farmer better opportunities to grow a crop after rice. An experiment was conducted startign in 1993 to evaluate dry seeding of rice through slit soil seeding. It is done utilizing the vertical metering slit seeder for conserving soil moisture coming from the first rains in the early WS to sustain germination and establishment of the seeding at least until the succeeding rains under therainfed lowland (RL) environment. The treatment consisted of slit-seeding the PSBRc 14 into the tilled and nontilled plots at 100kg/ha and at depths of <10 mm (shallow seeding) and 60-70m (deep seeding). The control treatment was broadcast seeded on tilled soil and harrow to cover the seeds The superior crop establishment observed in 1995 WS experiment on nontilled, slit-seeded plots confirmed the results observed in 1993 WS and 1994 WS experiments. Emergence in deep seeding was not significantly different from shallow seeding in nontilled plots giving an average yield of 2.1 t/ha in all slit-seeded plots. This offers an advantage of reduced energy in put in nontilled shallow seeding. However, heavy weed infestation has to be addressed at the early stage of rice in nontilled soil to get the full advantage from slit seeding. The consistently better crop establishment observed in slit seeding over that of broadcast seeding in the WS of 1993, 1994 and 1995 also demonstrates that the slit seeding technology can be adopted with confidence in the rainfed lowland field condition to reduce the risks involved in broadcast seeding.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.713-722
• /
• 2000

This study analysed error of measurement and reproducibility for particle size analysis by the laser diffraction spectrometer. Laser diffraction spectrometers has become a very important method of particle size analysis. This measuring method has the advantage of simple operation, good reproducibility and rapid analysis. A feeding and dispersing system have been developed, which allows mass throughputs between 0.1~23 g/min in flowing air and 1.4~35% in flowing liquid. It has been used as a feeder unit for wet and dry particle size analysis from diffraction patterns. Relevant parameters, such as particle shape, particle size, dispersion, flow rate, concentration were analysed for measuring error. And system parameters of instruments for measurement of dynamic processes, eg, measuring time, focal plane, injection pressure drop and dispersion effect by the ultrasonic and mixing of preliminary treatment, were also discussed.