MCNP를 이용한 밀도검층에 대한 수치모델링을 수행하였고, 인공 모형 시추공에 대한 교정곡선과의 비교를 통하여 MCNP 수치모델링의 신뢰성을 검토하였다. 이를 바탕으로 케이싱의 유무와 종류, 공내수의 유무, 존데와 공벽과의 거리 변화 등 국내 물리검층 자료 취득 현장에서 쉽게 접하는 3인치 시추공 환경에 대한 밀도검층 수치모델링을 수행하였다. 수치모델링 결과는 케이싱과 공내수의 영향을 정량적으로 반영하고 있으며 공벽으로부터의 간격 변화에 따른 일정한 양상을 보여준다. 본 연구를 통하여 MCNP를 이용한 수치모델링의 적용성을 파악할 수 있었으며 이를 활용하여 효과적인 검층 보정이 가능할 것으로 판단된다.
물리검층 중에서 매질의 밀도 측정을 통해 공극률을 계산할 수 있는 밀도검층에 대한 수치 연구 결과는 국내에서는 전무하다고 해도 과언이 아니다. 이 연구에서는 MCNP (Monte Carlo N-Particle) 알고리듬에 기초하여 밀도검층을 수치모형화하고 다양한 시추공 환경이 밀도검층 결과에 미치는 영향을 분석함으로써, 밀도검층 자료해석을 위한 기틀을 마련하고자 한다. 이를 위해, MCNP 알고리듬을 이용한 밀도검층 시물레이션의 적용성을 검토하기 위해 단순한 모형에서의 검출기 반응 연구를 수행하였다. 또한 수치 실험을 위해 한국지질자원연구원에서 사용하고 있는 상용 밀도검층기(Robertson Geologging사)에 기초하여 밀도검층기를 수치모델링하였다. 다양한 밀도의 매질에서 시추공 지름을 바꿔가면서 밀도검층 시물레이션을 수행함으로써, Robertson Geologging사의 밀도검층기를 위한 교정곡선을 제시하였다. 이 교정곡선에 기초하여 매질의 밀도를 보다 정확히 분석하고 다양한 시추공환경 변화가 밀도검층에 미치는 영향을 분석하기 위해, 공내수 유무에 따른 밀도검층 반응의 변화 및 시추공 케이싱의 종류에 따른 밀도검층 반응의 변화를 수치모델링을 통해 분석하였다. 이 연구는 밀도검층 시 시추공환경 변화가 검층결과에 미치는 영향을 이해하는 것을 돕고, 향후 국내 시추공환경의 밀도검층에 대한 보다 정확한 해석을 위한 연구의 기초가 될 것으로 기대한다.
2014년 충남 태안 신진도리의 해안지역에서 일어난 작은 산사태 지역의 지하구조를 파악하기 위하여 전기비저항 및 하향식 탄성파탐사와 시추·물리검층을 실시하였다. 시추·검층자료에서 산사태 발생지역의 상부에 위치한 시추공 BH-2의 5~7 m 깊이에서 N값이 현저히 낮아지는 것을 확인하여 하향식 탄성파탐사를 추가 실시하고 이 깊이에서 지질 연약대가 연장되는 것으로 가정하여 하부의 시추공 BH-1 지점까지 전기비저항 탐사를 실시하였다. 8 m 내외의 두께를 갖는 150 Ω·m 이하의 저비저항 이상대는 시추·검층자료에서 해석된 세립 실트질 점토로 이루어진 풍화토층과 잘 상관되었다. 시추공 BH-2에 걸쳐있는 지질 연약대는 시추공 BH-1에 비해 상대적으로 작은 밀도 1.6~1.8 g/㎤와 150 Ω·m 이하의 비교적 낮은 전기비저항로 나타나며 포아송 비는 깊이에 따라 그 편차가 크게 나타난다. 이 지역의 산사태는 초과 강수와 이로 인한 상승 지하수면의 영향으로 물을 함유한 실트질 점토를 많이 포함하고 있는 풍화토가 전단력이 감소되어 미끄럼 활동으로 나타난 것으로 해석하였다.
The purpose of this study is to collect basic data which are prerequisite for quantitative analysis of coal logging data. The study involves laboratory measurements of physical properties such as seismic velocities (P,S-waves), resitivity and density of domestic and imported foreign coals. The relationships between these properties were analyzed by using cross-plots. Correlation between the physical properties of coal and the results of chemical analysis (calorie, fixed carbon, ash, moisture, volatile matter and sulfur contents) was also studied to obtain ideas about coal quality analysis using logging data. Summarized results are as follows: 1. $V_P$ is exponentialy related to $V_S$. And the average value of $V_P$ is about l.8 times as large as $V_S$. 2. Since coal has very low density compared with surrounding sedimentary rocks, density logging is appeared to be the best method for identifying coal seams and evaluating their qualities. 3. For the case of domestic coals, the ash contents and calorie show a perfect inverse relationship. Since the density increases as increase of ash content with a well-defined functional form, the ash content of domestic coals can be estimated by density measurements. 4. Because of low ash content, low density and high resistivity, foreign coals and domestic lignites are easily distinguished from domestic coals.
한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
/
pp.723-730
/
2003
In general, well log and core data have been utilized for reservoir characterization. These well data can provide valuable information on reservoir properties with high vertical resolution at well locations. While the seismic surveys cover large areas of field but give only indirect features about reservoir properties. Therefore it is possible to estimate the reservoir properties guided by seismic data on entire area if a relationship of seismic data and well data can be defined. Seismic attributes calculated from seismic surveys contain the particular reservoir features, so that they should be extracted and used properly according to the purpose of study. The method to select the suitable seismic attributes among enormous ones is needed. The stepwise regression and fuzzy curve analysis based on fuzzy logics are used for selecting the best attributes. The relationship can be utilized to estimate reservoir properties derived from seismic attributes. This methodology is applied to a synthetic seismogram and a sonic log acquired from velocity model. Seismic attributes calculated from the seismic data are reflection strength, instantaneous phase, instantaneous frequency and pseudo sonic logging data as well as seismic trace. The fuzzy curve analysis is used for choosing the best seismic attributes compared to sonic log as well data, so that seismic trace, reflection strength, instantaneous frequency, and pseudo sonic logging data are selected. The relationship between the seismic attribute and well data is found out by the statistical regression method and estimates the reliable well data at a specific field location derived from only seismic attributes. For a future work in this study, the methodology should be checked an applicability of the real fields with more complex and various reservoir features.
암석의 열생산율은 구성 광물 내 방사성 동위원소의 방사성 붕괴와 감마선 방출에 의한 열에너지에 기인하며, 그 크기는 주요 방사성 동위원소인 U, Th, K의 함량에 지배적이다. 그러므로 암반의 열생산율은 암석의 밀도와 주요 동위원소의 함량에 기반해 평가할 수 있다. 심부 암반의 열생산율 평가에 필요한 방사성 동위원소의 농도는 시추공에서 회수된 암추 또는 암편에 대한 질량분석을 통해 파악할 수 있는데, 대심도 시추공의 경우 요구되는 분석량과 그에 따른 시간 및 비용의 문제로 적용이 제한적일 수 밖에 없다. 시추공을 대상으로 하는 물리검층 중 암반의 감마선 스펙트럼으로부터 U, Th, K의 함량을 유추할 수 있는 기술이 있지만, 열생산율 평가를 위해 별개의 밀도검층 자료를 필요로 하며, 상용화된 장비의 적용 심도 또한 아직은 제한적이다. 이에 대한 대안으로 시추공 암반이 방출하는 감마선의 강도를 측정하는 자연 감마선 검층 결과로부터 열생산율을 유추하는 방법이 제안된 바 있으며, 국내외에서 비교적 쉽게 암반의 열생산율을 평가할 수 있는 방법으로 사용되고 있다. 본 기술보고에서는 국내 상용화된 대심도 시추공 물리검층 장비 및 기술을 활용해 감마선 검층 기반의 열생산율 평가 기법을 개발하고, 국내 약 2 km 깊이의 대심도 시추공에 대한 적용 및 검증 사례를 소개하고자 한다.
Recently shield TBM tunnellings are being applied to subway construction in Korean cities. Generally these kinds of tunnellings have the problems in the stability of ground such as subsidence because urban subway is constructed in the shallow depth. A sinkhole occurred on the road just above the tunnel during tunneling in Kwangju, so a survey for upper layer of the tunnel was needed. But conventional Ground Probing Radar can't be applicable due to the presence of steel-mesh screen in the shield segment, so no existent geophysical method is applicable in this site. Because the outer surface of each shield segment is electrically insulated, dipole-dipole resistivity method which is popular in engineering site investigation, was tried to this survey for the first time. Specially manufactured flexible ring-type electrodes were installed into the grouting holes at an interval of 2.4 m on the ceiling. The K-Ohm II system which has been developed by KIGAM and tested successfully in many sites, was used in this site. The system consists of 1000Volt-1Ampere constant-current transmitter, optically isolated 24 bit sigma-delta A/D conversion receiver - maximum 12 channel simultaneous measurements, and graphical automatic acquisition software for easy data quality check in real time. Borehole camera logging with circular white LED lighting was also done to investigate the state of the layer. Measured resistivity data lack of some stations due to failing opening lids of holes, shows general high-low trend well. The dipole-dipole resistivity inversion results discriminate (1) one approximately 4 meter diameter cavity (grouted but incompletely hardened, so low resistivity - less than $30{\Omega}m$), (2) weak zone (100-200${\Omega}m$), and (3) hard zone (high resistivity - more than 1000${\Omega}m$) very well for the distance of 320 meters. The 2-D inversion neglects slight absolute 3-D effect, but we can get satisfactory and useful information. Acquired resistivity section and video tapes by borehole camera logging will be reserved and reused if some problem occurs in this site in the future.
A set of geophysical survey results over an area in Bookil-myun, Chungwon-Gun, Chungcheongbuk-Do is presented; resistivity logging, d.c. sounding, dipole-dipole resistivity, and controlled-source magnetotelluric (CSMT) surveys. These surveys were chosen in this research for the estimation of the basement depth and the delineation of the hydrogeologic structure over the survey area. The results provide an optimal input to a hydrogeologic modeling analysis using the strategies built in GIS software. A total of 14 lines of dipole-dipole resistivity surveys, 25 stations of d.c. sounding and 6 stations of CSMT sounding were performed. In addition 10 boreholes were chosen for resistivity logging to correlate the logs to the surface data. A quantitative information on the hydrogeologic structure over the area is provided by synthesizing the results from various geophysical data and attribute layers are constructed by utilizing a GIS software Arc/ Info. The constructed layers match well to the hydrogeologic structures, which were outlined from the drilling data. The methodology tested and adopted in this study would be useful for providing a more reliable input to the hydrogeologic model setup.
임해지역에서의 해수침투 평가를 위하여 서로 다른 수리지질학적 특성을 갖고 있는 3개의 연구지역, 9개의 시추공에서 전자유도검층, 공내수의 온도 및 전기전도도검층, 자연감마선검층을 수행하였다. 지표 물리탐사 이외에 물리검층을 추가로 활용함으로써 3개 연구지역의 해수침투와 관련된 지질학적 특성을 해석하는데 큰 도움을 얻을 수 있었다. 즉, 해수침투 평가에 물리검층을 활용함으로써 지표 물리탐사자료 해석의 정확성을 높일 수 있고, 지하수의 장기 모니터링을 위한 최적심도를 알아 낼 수 있으며, 지층의 투수성 여부에 관한 수리지질학적 단위를 구분할 수 있음을 보였으며 그밖에 물리검층 모니터링의 적용성에 대하여도 예시하였다. 시추공내 염수의 영향을 비교적 작게 받으면서 지층의 전기비저항을 측정하고, PVC 케이싱이 설치된 소구경의 시추공 내에서도 공극율을 측정할 수 있는 방법이 모색되면 물리검층으로 보다 정량적인 해수침투 관련 정보를 얻을 수 있을 것이다.
KIGAM (Korea Institute of Geoscience and Mineral Resources) launched a new project to develop the low-temperature geothermal water in the area showing high geothermal anomaly, north of Pohang city, for large-scale space heating. Surface geologic and geophysical surveys including Landsat 1M image analysis, gravity, magnetic, Magnetotelluric (MT) and controlled-source audio-frequency MT (CSAMT), and self-potential (SP) methods have been conducted and the possible fracture zone was found that would serve as deeply connected geothermal water conduit. In 2004, two test wells of 1.1km and 1.5km depths have been drilled and various kinds of borehole survey including geophysical logging, pumping test, SP monitoring, core logging and sample analysis have followed. Temperature of geothermal water at the bottom of 1.5km borehole reached over $70^{\circ}C$ and the pumping test showed that the reservoir contained huge amount of geothermal water. Drilling for the production well of 2 km depth is on going. After test utilization and the feasibility study, geothermal water developed from the production well is going to be provided to nearby apartments.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.