• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.125-133
• /
• 2002

In this study, it was investigated about endurance limit and fatigue behavior of load carrying fillet welded cruciform joints according to welding methods of SMAW, SAW, MIG and FCAW commonly using for welding structures in present. Endurance limit carried omit highly in the order of SMAW, MIG, SAW, FCAW and fatigue crack propagation ratio carried out lowly in the order of SMAW, MIG, FCAW, SAW. By these results, it is needed to use SMAW or MIG welding methods for welding structures with small welding capacity and SAW or FCAW methods for large welding structures after due consideration about economic gains and operation efficiency of welding. Fatigue crack propagation ratio is more effected by strength of welding materials than endurance limit of welding materials according to welding methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.5
• /
• pp.35-43
• /
• 2007

Laser welding of metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for metals with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the butt welding, the welding quality of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding quality is 1325W of the laser power, and 1.4m/min of laser welding speed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.1
• /
• pp.38-44
• /
• 2003

In this study, endurance limit and fatigue behavior of load carrying fillet welded cruciform joints depending on commonly used welding methods such as SMAW, SAW, MIG and FCAW are investigated. In respect of endurance limit SMAW specimen showes highest result, and then MIG, SAW, FCAW in descending order. However, SMAW specimen showes lowest crack growth rate and it followed by MIG, FCAW, SAW. By these results, it is needed to use SMAW or MIG welding methods for welding structures with small welding capacity and SAW or FCAW methods for large welding structures with respect to economic benefits and operation efficiency of welding. It was also shown fatigue crack growth rate was more influenced by the strenght of welding materials than the endurance limit of welding materials.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.24-24
• /
• 2009

현재 조선소를 비롯하여 각종 산업 전반적으로 기존의 SCR 용접기를 대체하여 용접품질이 우수한 인버터 용접기가 널리 사용되고 있는 실정이다. 그러나 기존 인버터 용접기의 전원은 Mono 타입으로 이루어져 있어 대용량 인버터 용접기의 경우 대용량 스위칭 소자가 요구되어 제조원가가 높다. 그리고 문제 발생 시 용접기의 사용이 불가능하게 된다. 개발된 단위모듈을 병렬로 연결하여 대용량 용접기를 구성하게 되면 제조원가를 절감할 수 있으며 병렬로 연결되어 단위 모듈에 문제가 발생하여도 계속적인 사용이 가능하고, 주 회로를 작은 용량으로 분산시켜 전력을 제어하므로 높은 에너지 효율을 가지게 된다. 또한 인버터 용접기의 가장 중요한 성능인 스위칭 주파수에 있어서도 기존의 인버터 용접기는 20kHz의 스위칭 주파수를 가지지만 본 기술은 낮은 전력을 병렬로 연결하여 대용량을 동시에 제어가능 하므로 약 70kHz의 고속제어가 가능하다. 본 연구에서는 개발된 용량 170A단위모듈을 병렬로 연결하여 단위모듈 집적형 인버터 아크용접기 510A, 680A급의 부하테스트 실시 및 기본출력특성에 대하여 실험하였으며, GMAW에서 ${\Phi}1.6$ 솔리드 와이어를 이용하여 두께 20t의 후판 맞대기 용접에 적용실험을 실시하였다. 그 결과 모든 전류영역에서의 부하특성 및 출력특성이 양호하게 나타났으며, 후판 맞대기 용접에서는 SAW에 버금가는 생산성과 용접특성을 얻을 수 있었다.

• Journal of the Society of Disaster Information
• /
• v.20 no.3
• /
• pp.593-600
• /
• 2024

Purpose: In this study, fundamental research was conducted to capture sparks generated during the arc welding process. Method: To this end, a mock-up collection device was developed, consisting of a blower for suction, a nozzle, and a filter and magnet at the suction point. To analyze the correlation between the shape of the filter and its magnetic properties, the porosity and pore size of both carbon filters and Colgate filters were quantified under conditions of a welding machine capacity of 1,800W and a welding time of 70s. The collection efficiency of sparks was calculated for magnetic strengths of 2.6, 3.4, and 4.05kgf. Result and Conclusion: As a result, empirical formulas were derived for the blower's suction capacity, magnetic strength, porosity, and pore diameter for capturing sparks, with experimental results confirming consistency within ± 10%. The findings of this study are expected to provide a quantitative design approach for collection devices that can minimize the risk of fire spread associated with welding operations at construction sites.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.2
• /
• pp.51-58
• /
• 2006

Laser welding of dissimilar metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for SM45C and STS304 with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the dissimilar welding, the welding quality of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding qualify is 1600W of the laser power, 0.85m/min of welding speed and $4{\ell}/min$ of pressure for shielding gas.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.997-1003
• /
• 2005

Laser welding of dissimilar metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for SM45C and STS304 with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the dissimilar welding, the welding qualify of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding quality is 1600W of the laser power, 0.85m/min of welding speed and 4m/min of pressure for shielding gas.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.569-574
• /
• 1997

This research has improved composite joint system of R/C column and steel beam developed at previous study. In this system, the shear force occurred at beam is transmitted by bearing resistance of stiffness and moment is resisted by tension capacity of coupling members. As the preliminary step of stress transfer tests of this system, welding performance test of coupling member such as round bar or square bar which has a role of moment transfer has been carried out. From the test, this element has a good welding performance and enough resistance capacity compared to design force.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1560-1565
• /
• 2005

Laser beam welding is increasingly being used in welding of structural steels. The laser welding process is one of the most advanced manufacturing technologies owing to its high speed and deep penetration. The thermal cycles associated with laser welding are generally much faster than those involved in conventional arc welding processes, leading to a rather small weld zone. Experiments are performed for 304 stainless steel plates changing several process parameters such as laser power, welding speed, shielding gas flow rate, presence of surface pollution, with fixed or variable gap and misalignment between the similar and dissimilar plates, etc. The following conclusions can be drawn that laser power and welding speed have a pronounced effect on size and shape of the fusion zone. Increase in welding speed resulted in an increase in weld depth/ aspect ratio and hence a decrease in the fusion zone size. The penetration depth increased with the increase in laser power.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.17-18
• /
• 2006

Laser welding of metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for metals with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the butt welding, the welding quality of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding quality is 1400W of the laser power, 0.8m/min, 0.9m/min of welding speed and $4{\ell}$ in of pressure for shielding gas.