• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.149-153
• /
• 1998

In this paper A switched mode AC/DC three phase boost converter with high power factor and sinusoidal input current waveform is analyzed and simulated. The proposed converter retain high power factor and sinusoidal input current waveform even under electric arc welder load. It is shown that experimental result and simulation waveform yield a sinusoidal input current waveform at high power factor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.276-284
• /
• 2000

저항 스폿용접기에서 용접품질의 보증은 오래 계속 되어온 문제이었다. 본 논문에서는 용접품질과 전극분리와의 관계를 조사하였으며 전극분리가 하나의 제어변수로써 사용될 수 있음을 실험적으로 입증하였다. 피드백신호로서 전극분리를 이용한 퍼지제어에 기초를 둔 용접품질개선을 제시하였다. 저항 스폿용접기의 용접품질은 인장전단강도시험과 같은 파괴적인 검사에 의해 증명되었다. 시험결과는 퍼지 제어기를 이용한 전극분리 제어의 성능이 종래의 정전류 제어와 비교하여 훨씬 더 우수하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2775-2777
• /
• 2003

In this paper we studied the fittest method of effective production line for multifunction welder. So, that can be good productivity. Because this method is simpler than present method and it don't need to change on production line for new product.

• Journal of the Korean Professional Engineers Association
• /
• v.4 no.14
• /
• pp.24-28
• /
• 1971

• JOURNAL OF ELECTRICAL WORLD
• /
• no.5 s.53
• /
• pp.98-99
• /
• 1981

• 월간산업보건
• /
• s.169
• /
• pp.22-27
• /
• 2002

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4288-4295
• /
• 2011

In this paper, variable reactor and capacitor for high-frequency welder are analyzed by optimum design. As the polar panel of high-frequency welder has the role of condenser, the material with the high rate of induced electricity has to be selected in order to manufacture the condenser with the great power cut. And the area of polar panel must be large and the gap between panels must be thin. On the contrary, the resistance is generated and the heat is happened because the large current is flown. To prevent the thermal deformation of this polar panel, the temperature can be lowered by using cooling water and so on. At this point, the speed of cooling water due to deformation and temperature of polar panel can be optimized.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.605-611
• /
• 2023

In this study, in order to reduce energy that affects the natural environment, a moving iron core type welding machine and a digital welding machine (inverter type) with low power consumption are compared in shielded arc welding, and the parts that use less power and have the same weldability conditions are identified. want to check. The movable iron core welder uses alternating current that outputs a sine wave, and the digital welder also generates a sine wave alternating current, so it must have the same conditions, low power consumption, and the same weldability. However, weldability can be verified in various ways, but the analysis is limited to the qualification test in the field of national technical qualification welding.

• Tuberculosis and Respiratory Diseases
• /
• v.72 no.2
• /
• pp.223-227
• /
• 2012

Pulmonary siderosis, or Welder's lung disease is an occupational lung disease caused by iron-inhalation. Diagnosis of pulmonary siderosis is based on occupational history of the patient, radiologic findings, and pathologic findings of iron-laden macrophages within lung tissue or broncho-alveolar lavage fluid. We observed a case of a 43 years-old welder diagnosed with pulmonary siderosis via thoracoscopic lung biopsy. Sputum culture along with pathology also identified a non-tuberculotic mycobacterial infection with a sputum culture and the pathologic findings. The patient was treated with anti-tubercular medication and cessation of iron-exposure. And his condition improved within a few months.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.2
• /
• pp.66-74
• /
• 2016

In this study, characteristics of TiAl alloy and SCM440 (Cr-Mo steel) have been investigated with the various joining condition by servo motor type friction welder. The experimental factors of friction welder used in this study are spindle revolution, friction speed, and distance, upset speed and distance, respectively. Servo motor type friction welder could be controlled by the level of oil pressure, and it could be performed by position control dependence of electrical energy. Mechanical properties and morphology of welded interface were characterized by various joining condition. This aroused due to the bond strength dependence on friction heat and size of the heat affected zone. Therefore, it is necessary to have enough friction heat and decreased heat affected zone for good friction welding between dissimilar metals. An optimum bond was obtained between TiAl alloy and SCM440 by controlling friction speed and distance. At the spindle revolution 4,000 rpm, friction speed 120 mm/min, friction distance 15 mm, the bond strength was found to be 312 MPa.