• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.565-573
• /
• 2008

This paper proposes noise reduction methods to improve the channel estimation performance in Equalization On-Channel Repeater (E-OCR) for Terrestrial-Digital Multimedia Broadcasting (T-DMB) system. In the E-OCR for T-DMB system, the channel estimation is performed by the pilot signal extraction and the channel coefficient estimation. Since the performance of the channel estimation highly depends on the estimated channel coefficients whose accuracy is associated with the received signal-to-noise ratio (SNR), it is important to reduce noise existing at the estimated channel coefficients. To reduce such noise components, various noise reduction methods of the estimated channel coefficients based on the M -point weighted moving average are proposed. Computer simulations show that the proposed methods improve the estimation performance by more than 2 to 3 dB in terms of the symbol error rate after equalization.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.39-43
• /
• 2007

In high speed communication networks, the determination of a transmission rate is critical for the stability of a closed-loop network system with the congestion control scheme. In ATM networks, the available bit rate (ABR) service is based on a feedback mechanism, i.e., the network status is transferred to the ABR source by a resource management (RM) cell. RM cells contain the traffic information of the downstream nodes for the traffic rate control. However, the traffic status of the downstream nodes can not be directly transferred to the source node in the IP based networks. In this paper, a new rate-based congestion control scheme using an exponential weighted moving average algorithm is proposed to build an efficient feedback control law for congestion avoidance in high speed communication networks. The proposed congestion control scheme assures the stability of switch buffers and higher link utilization of the network. Moreover, we note that the proposed congestion scheme can flexibly work along with the increasing number of input sources in the network, which results in an improved scalability.

• Korean Journal of Agricultural Science
• /
• v.41 no.3
• /
• pp.169-175
• /
• 2014

Objective of this study was to investigate effects of pre-processing method and number of sampling leaves on stability of the reflectance measurement for Chinese cabbage and kale leaves. Chinese cabbage and kale were transplanted and cultivated in a plant factory. Leaf samples of the kale and cabbage were collected at 4 weeks after transplanting of the seedlings. Spectra data were collected with an UV/VIS/NIR spectrometer in the wavelength region from 190 to 1130 nm. All leaves (mature and young leaves) were measured on 9 and 12 points in the blade part in the upper area for kale and cabbage leaves, respectively. To reduce the spectral noise, the raw spectral data were preprocessed by different methods: i) moving average, ii) Savitzky-Golay filter, iii) local regression using weighted linear least squares and a $1^{st}$ degree polynomial model (lowess), iv) local regression using weighted linear least squares and a $2^{nd}$ degree polynomial model (loess), v) a robust version of 'lowess', vi) a robust version of 'loess', with 7, 11, 15 smoothing points. Effects of number of sampling leaves were investigated by reflectance difference (RD) and cross-correlation (CC) methods. Results indicated that the contribution of the spectral data collected at 4 sampling leaves were good for both of the crops for reflectance measurement that does not change stability of measurement much. Furthermore, moving average method with 11 smoothing points was believed to provide reliable pre-processed data for further analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.211-218
• /
• 1998

In start-up process control applications it may be necessary to limit the sample size to one measurement. A control chart for individual measurements is used whenever it is desirable to examine each individual value from the process immediately. A possible option would be to use an exponential weighted moving(EWM), using modifying statistics with individual measurement, chart for monitoring the process center, and using a moving range (MR) chart for monitoring process variability. In this paper it is shown that there is scheme in using the EWM procedure based on average run length. An expression for the ARL is given in terms of an integral equation, approximated using numerical quadrature. In this case, where it is reasonable to assume normality and negligible autocorrelation in the observations, provide graphs that simplify the design of EWM-MR chart and taking method of exponential smoothing constant(λ) and constant(K) are suggested. The charts suggested above evaluate using the conditional probability.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.93-99
• /
• 2012

This study aims to identify spatio-temporal land price change pattern in Gongju city including the area incorporated and surrounding area depending on the Multifunctional Administrative City Construction. For this, GIS data was built by calculating the average land price each 209 Dong and Ri by the time of the year 2000, 2005 and 2010 based on. The first, the change in the land price was to identify in the 5-year intervals through a kriging interpolation as a kind of geostatistical techniques. The second, a trend analysis was conducted to know directional change pattern of the east-west axis and the north-south axis. Finally, the weighted mean center was calculated by the land price at a weight to examine moving direction on the center point of land price, point of view. The result is that the land price change pattern appeared visible higher growth on the eastern built in the Multifunctional Administrative City, moving direction on the center point of the land price appeared that the phenomenon was concentrated in the northeastern area.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.2
• /
• pp.311-320
• /
• 2013

The purpose of this paper is to suggest the methods of forecasting the numbers of students. The generalized weighted proportion estimation models are suggested and used for forecasting the numbers of student until 2029. The results of the Monte Carlo simulation show that the suggested method is powerful for the forecasting. In conclusion, the numbers of the third grade high-school students will be less than the numbers of college admission quota from 2019.

• Journal of the Korea Society for Simulation
• /
• v.16 no.4
• /
• pp.43-55
• /
• 2007

Moving average(MA) and exponentially weighted moving average(EWMA) are the two most popular control methods in manufacturing. Both methods are optimized under the assumption that the exact control equation is known. This paper focuses on the problems rising from estimation errors. Based on the accuracy of the estimated parameter and the range of the weight parameter $\lambda$, the limitations are identified and the performance of methods are evaluated. Optimal adjustment for process shift with misestimated control model and its application control methods to actual process is researched. The efficiency of proposed method is evaluated through simulation.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.255-263
• /
• 2010

The research developes short-run standardized control charts(SSCC) and short-run acceptance control charts(SACC) under the various demand patterns. The demand patterns considered in this paper are three types such as high-variety and repetitive low-volume pattern, extremely-high-variety and nonrepetitive low-volume pattern, and high-variety and extremely-low-volume pattern. The short-run standardized control charts developed by extending the long-run ${\bar{x}}$-R, ${\bar{x}}$-s and I-MR charts have strengths for practioners to understand and use easily. Moreover, the short-range acceptance control charts developed in the study can be efficiently used through combining the functions of the inspection and control chart. The weighting schemes such as Shewhart, moving average (MA) and exponentially weighted moving average (EWMA) can be considered by the reliability of data sets. The two types according to the use of control chart are presented in the short-range standardized charts and acceptance control charts. Finally, process capability index(PCI) and process performance index(PPI) classified by the demand patterns are presented.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.257-262
• /
• 2010

The study investigates the various Acceptance Control Charts (ACCs) based on the factors that include process independence, data weighting scheme, subgrouping, and use of control charts. USL - LSL > $6{\sigma}$ that used in the good condition processes in the ACCs are designed by considering user's perspective, producer's perspective and both perspectives. ACCs developed from the research is efficiently applied by using the simple control limit unified with APL (Acceptable Process Level), RLP (Rejectable Process Level), Type I Error $\alpha$, and Type II Error $\beta$. Sampling interval of subgroup examines i.i.d. (Identically and Independent Distributed) or auto-correlated processes. Three types of weight schemes according to the reliability of data include Shewhart, Moving Average(MA) and Exponentially Weighted Moving Average (EWMA) which are considered when designing ACCs. Two types of control charts by the purpose of improvement are also presented. Overall, $\alpha$, $\beta$ and APL for nonconforming proportion and RPL of claim proportion can be designed by practioners who emphasize productivity and claim defense cost.

• Journal of the military operations research society of Korea
• /
• v.34 no.2
• /
• pp.79-101
• /
• 2008

This study is for improvement of repair part demand forecasting method of Republic of Korea Air Force aircraft. Recently, demand prediction methods are Weighted moving average, Linear moving average, Trend analysis, Simple exponential smoothing, Linear exponential smoothing. But these use fixed weight and moving average range. Also, NORS(Not Operationally Ready upply) is increasing. Recommended method of Box-Jenkins' ARIMA can solve problems of these method and improve estimate accuracy. To compare recent prediction method and ARIMA that use mean squared error(MSE) is reacted sensitively in change of error. ARIMA has high accuracy than existing forecasting method. If apply this method of study in other several Items, can prove demand forecast Capability.