• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.746-752
• /
• 2010

Rib structure has been used to bed and column of machine tool to heighten weight stiffness ratio, cost performance and weight saving. In this paper the bed rib structure was estimated with thermal characteristics. Using superposition principle, machine tool designer can describe every complicated heat generation in the machine tool thermal source. As thermal characteristics, thermal deformation of guide rail and column and Maximum-minimum temperature variation were selected. The size, configuration and direction against the thermal loading surface operated to the thermal characteristics. The DB chart was made following rib structure estimating thermal characteristics. With superposition principle and DB chart, machine tool designer can prognosticate the thermal characteristics without FEM analysis to every bed rib structure.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.1-16
• /
• 2011

In these days, according to increased environmental regulations, to reduce the VOC content in paints and inks efforts are now in progress. A lot of research have progressed hydrocarbon solvents substitute with vegetable oil or ester in the printing ink but it is restricted to use vegetable oil in the inks because of high molecular weight and viscosity. Oil ester currently developed for printing inks still have some drawbacks, but overall the printability and print quality when using ester than hydrocarbon solvents are showing good results. Thus, in this paper, I studied about the properties variation of the varnish and inks according to vegetable ester, after I reacted vegetable ester using the vegetable fatty acid and ethyl alcohol, butyl alcohol. The compared in order of average molecular weight by the GPC method, rheological properties were found by rotational rheometer, and emulsion behavior were compared by high speed emulsification tester.

• Plant Resources
• /
• v.3 no.3
• /
• pp.206-210
• /
• 2000

A total of 20 soybean recommended varieties which were developed until late 1980's in Korea was evaluated at Suwon. Comprehensive evaluation and correlation analysis were conducted on the agronomic characters. Great variations were found in these genotypes for branch number, pod number, and grain yield per plant. The variation in number of pods/plant ranged from 53 to 164, and in grain yield from 25.9 to 68.8 g. The coefficient of variation for most of the characters had a wide range. In correlation coefficient, grain yield per plant showed a positive phenotypic association with weight of pods, pod number of branches, and weight of stem. Multiple regression analysis was done to formulate selection criteria. It indicated that stout and medium-stature genotypes with more branches, resulting in varieties with more pods per plant but with medium-size seeds are available to obtain high-yielding varieties.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.5
• /
• pp.426-434
• /
• 2011

Accurate weight prediction methods are an essential of the ship design in both ship cost managements and performance satisfactions. When no parent or similar ships are available, an adequate method of the ship weight estimating is required. In this study, there was carried out to develop the ship weight estimating method for the preliminary design phase. The weight estimating methods were first surveyed by the references and summarized their characteristics. The weight estimation method by statistical approach was developed for the container ship because the containerized transportation markets is gradually growing and ship's size and loading capacity are rapidly enlarged. The correlation analysis and the multiple regression analysis were used for developing the weight estimating method. As a results of evaluating the developed method, the error ratio of the variation between estimated weight and ship's data was about 5%. And it was only 1% difference with the calculating weight of conceptual design results by shipyard design team that the estimating weight of ultra-large container ship was predicted by the developed method.

• Journal of the Korea Furniture Society
• /
• v.16 no.1
• /
• pp.17-23
• /
• 2005

European maple is famous for the optimum solid wood for making bridge which is the most important part in violin acoustics. This study was carried out to investigate the variation of main features, i. e. annual ring width and cutting direction of costly imported violin bridge blanks and to examine the effect of these features of the blanks on the vibrational characteristics of bridge blanks. Imported violin bridge blanks had somewhat large variation in major macroscopical and physical properties and there was little relationship between annual ring density and weight of maple blanks. Resonant frequency of violin bridge blanks had some positive correlation with weight, however, damping having negative relationship with frequency was seldom affected by any physical properties of the maple blanks. Deviation from the radial cutting of tail side(ray direction from top toward feet on the edge of bridge blank) lowered the resonant frequency. Consequently, weight and ray direction should be taken for the critical quality decisive factors(QDF) of incoming bridge blanks by not only inspectors also luthiers who tune the bridge by shaping and are responsible for the final timbre quality of this complicate instrument.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.173-173
• /
• 2017

Phalaenopsis orchid is one of the most important flowers in flower industry. We conducted an experiment to find out the response of different concentration of chlorocholine chloride (CCC) for the in vitro regeneration of protocorm like bodies (PLBs) of Phalaenopsis 'Fmk02010'. We used five different concentrations of CCC and these were 0 (control), 0.01, 0.1, 1 and $10mgL^{-1}$ in modified MS medium and cultured for 42 days. We added two major salts ammonium nitrate ($412.5mgL^{-1}$) and potassium nitrate ($950.0mgL^{-1}$) to the MS medium for the modification. Maximum numbers of PLBs were found from media with $0.01mgL^{-1}$ of CCC (15.667) and maximum fresh weight (0.211 g) as well. The 100% PLB formation rate was also found from $0.01mgL^{-1}$ of CCC. We found 58.83% variation in number of PLBs ($R^2=0.5883$) and 47.44% variation in fresh weight ($R^2=0.4744$) to the different CCC concentrations. Our study suggested that increase in the CCC concentration negatively affect the PLBs organogenesis of Phalaenopsis. We can suggest that the addition of very low concentration of CCC in plant culture medium can increase the number, formation rate and fresh weight of PLBs of Phalaenopsis.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.177-177
• /
• 2017

Phalaenopsis orchid is one of the most important flowers in flower industry. We conducted an experiment to find out the response of different concentration of chlorocholine chloride (CCC) for the in vitro regeneration of protocorm like bodies (PLBs) of Phalaenopsis 'Fmk02010'. We used five different concentrations of CCC and these were 0 (control), 0.01, 0.1, 1 and $10mgL^{-1}$ in modified MS medium and cultured for 42 days. We added two major salts ammonium nitrate ($412.5mgL^{-1}$) and potassium nitrate ($950.0mgL^{-1}$) to the MS medium for the modification. Maximum numbers of PLBs were found from media with $0.01mgL^{-1}$ of CCC (15.667) and maximum fresh weight (0.211 g) as well. The 100% PLB formation rate was also found from $0.01mgL^{-1}$ of CCC. We found 58.83% variation in number of PLBs ($R^2=0.5883$) and 47.44% variation in fresh weight ($R^2=0.4744$) to the different CCC concentrations. Our study suggested that increase in the CCC concentration negatively affect the PLBs organogenesis of Phalaenopsis. We can suggest that the addition of very low concentration of CCC in plant culture medium can increase the number, formation rate and fresh weight of PLBs of Phalaenopsis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.182-189
• /
• 1993

To improve the resolution of complex flow field features, grid adaptation scheme of Anderson has been revised, which was based on the Poisson grid generator of Thompson. Anderson's original scheme adapts the grid to solution automatically, but if flow field is more or less complex, then the adaptivity is weak. So the technique of using threshold which is used in unstructured grid system is adopted. The regions of large variation in the solution are marked by marking function which has the property of total variation of the solution, and these regions have same values of weight but other regions are neglected. This updated method captures shocks clearly and sharpy. Four examples are demonstrated, (1) Hypersonic flow past a blunt body, (2) High speed inlet analysis, (3) Supersonic flow of M=1.4 over a 4% biconvex airfoil in a channel, (4) Hypersonic shock-on-shock interaction at M=8.03.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.349-355
• /
• 1992

Comfortable sleeping largely depends on human mental state, physical condition, the temper. ature and humidity in bedrooms, and qualities of quilt and bedcover. Of the qualities of quilt, thermal insulation effect plays the most important role in keeping bedroom in ample temperature and preventing human body from giving off heat. In the present study, which is a sequel study to research on the thermal insulation effect, the real-size quilts with the following items of filling materials in them are designed to research on the variation of each item, and to measure the effect of the weight variation in inner covers on the thermal insulation effect of quilts, the results are as follows: 1. The coefficient between the weight of filling materials and the thermal insulation effect of quilt is shown to be a significant $0.91\~0.97$. 2. The thermal insulation effect of the quilts with in size of $0.5\;Kg/m^{2}$ is surveyed to be high in order down > polyester > cotton > wool. 3. The effect of the texture of inner covers on the thermal insulation effect of quilt is shown to be ignorably low. 4. The weight of filling materials is shown to be in correlation with the thermal insulation effect of quilts, and the estimated regression line has been obtained.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.1
• /
• pp.45-59
• /
• 2011

According as gradually increasing the demand for Eco-friendly products it has been progressed fairly development at a field of printing and printing inks. The Inks are used by soy oil beginning of ink industry for preventing environment. Now it is possible to make Eco-friendly inks with vegetable ester. So it is not necessary to use petroleum-based solvents for preventing environment. But There is some problems if using vegetable ester to inks. Vegetable ester has high solubility, it causes misting and low viscosity of the Inks. So resin is required high performance. Thus, in this paper, I studied about the properties variation of the Varnish and inks According to using the phenolic modified rosin ester and Soy oil Methyl esters. The compared in order of average molecular weight by the GPC method, rheological properties were found by rotational rheometer, and emulsion behavior were compared by high speed emulsification tester.