• Journal of Yeungnam Medical Science
• /
• v.19 no.2
• /
• pp.99-106
• /
• 2002

Background: Simple ventricular septal defect(VSD) is the most common congenital heart disease. Although closure of VSD is currently associated with a relatively low risk, experience with younger and smaller infants has been variably less satisfactory. We assessed the results of surgical closure of VSD in infant. Materials and Methods: Between 1996 and 2000, 45 non-restrictive VSD patients underwent patch repair and retrospective analysis was done. Patients were divided into two groups based on weight: group I infants weighed 5kg or less(n=16), and group II infants weighed more than 5kg(n=29). Both groups had similar variation in sex, VSD location, aortic cross clamp time and total bypass time. But combined diseases (ASD, PDA, MR) were more in group I. We closed VSD with patch and used simple continuous suture method in all patients. Results: There were no operative mortality, no reoperation for hemodynamically significant residual shunt and no surgically induced complete heart block. As a complication, pneumonia(group I: 2 cases, group II: 2 cases), transient seizure(group II: 2), wound infection(group I: 1, group II: 1), urinary tract infection(group I: 1) and chylopericardium(group I: 1) developed, and there was no significant difference between two groups(p>0.05). Conclusion: Early primary closure with simple continuous suture method was applicable in all patients with non-restrictive VSD without any serious complications.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.33-37
• /
• 2019

In this study, the graded thermal properties of composites are obtained by difference in specific gravity of fillers including Cu, h-BN and GO powders in epoxy. Relatively heavy powders such as Cu and h-BN compared to GO mostly at the bottom layer, while light GO powders were dispersed in the top layer in the composites. The thermal conductivity of composites was gradually increased from 0.55 (0.52) W/mK to 2.82 (1.37) W/mK for GO/h-BN (GO/Cu) epoxy composites from surface to bottom. On the contrary, the coefficient of thermal expansion was decreased from 51 ppm/℃ to 23 ppm/℃ and from 57 ppm/℃ to 32 ppm/℃ for GO/Cu and GO/h-BN, respectively. The variation of thermal properties in composites is attributed due to intrinsic material properties of filler including thermal conductivity, morphology and the distribution by the specific weight of fillers. This simple strategy for realizing graded thermal composites by introducing different filler materials would be effective heat transfer at interface of heterostructure with large thermal properties such as inorganic semiconductor/plastic, metal/plastic, and semiconductor/metal.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.422-433
• /
• 2017

Unmanned Aerial Vehicle (UAV) has several advantages over conventional remote sensing techniques. They can acquire high-resolution images quickly and repeatedly. And with a comparatively lower flight altitude, they can obtain good quality images even in cloudy weather. In this paper, we developed for estimating garlic growth at field scale model in major cultivation regions. We used the $NDVI_{UAV}$ that reflects the crop conditions, and seven meteorological elements for 3 major cultivation regions from 2015 to 2017. For this study, UAV imagery was taken at Taean, Changnyeong, and Hapcheon regions nine times from early February to late June during the garlic growing season. Four plant growth parameters, plant height (P.H.), leaf number (L.N.), plant diameter (P.D.), and fresh weight (F.W.) were measured for twenty plants per plot for each field campaign. The multiple linear regression models were suggested by using backward elimination and stepwise selection in the extraction of independent variables. As a result, model of cold type explain 82.1%, 65.9%, 64.5%, and 61.7% of the P.H., F.W., L.N., P.D. with a root mean square error (RMSE) of 7.98 cm, 5.91 g, 1.05, and 3.43 cm. Especially, model of warm type explain 92.9%, 88.6%, 62.8%, 54.6% of the P.H., P.D., L.N., F.W. with a root mean square error (RMSE) of 16.41 cm, 9.08 cm, 1.12, 19.51 g. The spatial distribution map of garlic growth was in strong agreement with the field measurements in terms of field variation and relative numerical values when $NDVI_{UAV}$ was applied to multiple linear regression models. These results will also be useful for determining the UAV multi-spectral imagery necessary to estimate growth parameters of garlic.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.397-406
• /
• 2009

The low quality fresh ginseng was extracted by water at $80^{\circ}C$ and 240 bar for 20 min (HPE, High pressure extraction process). The cytotoxicity on human normal kidney cell (HEK293) and human normal lung cell (HEL299) of the extracts from HPE showed 28.43% and 21.78% lower than that from conventional water extraction at $100^{\circ}C$ in adding the maximum concentration of $1.0\;mg/m{\ell}$. The human breast carcinoma cell and lung adenocarcinoma cell growth were inhibited up to about 86%, in adding $1.0\;mg/m{\ell}$ of extracts from HPE. This values were 9-12% higher than those from conventional water extraction. On in vivo experiment using ICR mice, the variation of body weight of mice group treated fresh ginseng extracts from HPE of 100 mg/kg/day concentration was very lower than control and other group. The extracts from HPE was showed longer survival times as 35.65% than that of the control group, and showed the highest tumor inhibition activities compared with other group, which were 70.64% on Sarcoma-180 solid tumor cells. On the high performance liquid chromatogram (HPLC), amount of ginsenoside-$Rg_2$, $Rg_3$, $Rh_1$ and $Rh_2$ on fresh ginseng were increased up to 43-183% by HPE, compared with conventional water extracts. These data indicate that HPE definitely plays an important role in effectively extracting ginsenoside, which could result in improving anticancer activities. It can be concluded that low quality fresh ginseng associated with this process has more biologically compound and better anticancer activities than that from normal extraction process.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.749-754
• /
• 2011

In this study, we propose the design of optimized pRBFNNs-based face recognition system using two-dimensional Image and ASM algorithm. usually the existing 2 dimensional face recognition methods have the effects of the scale change of the image, position variation or the backgrounds of an image. In this paper, the face region information obtained from the detected face region is used for the compensation of these defects. In this paper, we use a CCD camera to obtain a picture frame directly. By using histogram equalization method, we can partially enhance the distorted image influenced by natural as well as artificial illumination. AdaBoost algorithm is used for the detection of face image between face and non-face image area. We can butt up personal profile by extracting the both face contour and shape using ASM(Active Shape Model) and then reduce dimension of image data using PCA. The proposed pRBFNNs consists of three functional modules such as the condition part, the conclusion part, and the inference part. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of RBFNNs is represented as three kinds of polynomials such as constant, linear, and quadratic. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. The proposed pRBFNNs are applied to real-time face image database and then demonstrated from viewpoint of the output performance and recognition rate.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.173-183
• /
• 1983

To evaluate growing degree days(GDD) as an index of growth duration of rice plants, 30 days old seedlings of 16 japonica and 14 indica/japonica varieties were transplanted six times from May 10 at the 10-day intervals at Gyeongsan in 1982. The number of days from transplanting to heading decreased as transplanting dates delayed in all japonica varietie and 4 indica/japonica varieties but that of 10 indica/japonica varieties decreased up to June 9 or June 19 transplantings and then it levelled off or increased with further delay of transplanting. However, GDD requirement was similar among transplanting dates at appropriate base temperatures; GDD could be better than calendar day system to classify maturity of varieties especially grown in a wide range of climatic conditions. Required GDD from transplanting to heading of all indica/japonica and early japonica varieties showened a smaller coefficient of variation (CV) compared to longer season japonica varieties. Among GDD methods, an accumulation of daily Max + Min temp./2 -$l0^{\circ}C$ showed the smallest CV for the duration from transplanting to heading, but for ripening period GDD calculated with adjusted maximum temperature when it was higher than $30^{\circ}C$ showed the best results. Heading date did not affect required GDD for maturity of japonica varieties, but in indica/japonica varieties GDD decreased as heading date delayed; at late transplantings ripening period of indica/japonica varieties was less extended compared to japonica varietes due to a decrease in grain weight.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.2
• /
• pp.167-173
• /
• 1981

Respiration of whole seeds and seed parts isolated from four soybean varieties Essex, Pickett, Wayne and Bonus as measured at $25^{\circ}C$ during germination. The average respiration rates of cotyledons were significantly higher than those of other parts. The values were 35.7, 28.0 and $23.9{\mu}hr^{-1}$ seed$^{-1}$ for cotyledons, embyros, and hila, respectively. Bonus showed a significantly lower respiration rate than the other varieties did. The interaction of variety x seed part was not significant source of variation for respiration. This suggests that seed part and variety independently contribute to soybean seed respiration during early imbibition. The effects of imbibition time and time x variety intereaction on whole seed respiration were significant, but the variety effect was not significant. The correlation coefficient between seed moisture content and respiration after 24 hours of imbibition was significant for Bonus, but not for the other varieties tested. This suggests that Bonus may require more water for respiration during imbibition than the other varieties. There as no significant correlation of whole seed respiration rate after 24 hours imbibition with seed weight or seedling length.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.220-227
• /
• 1997

Water deficit stress during early soybean[Glycine max (L.) Merrill] growth stage is the most important environmental factor limiting productivity. Eight soybean genotypes were grown in replicated pot under well-watered(control: near 0 bar) and drought(-5 and -10 bars) conditions. Soybean plants were subject to drought stress for 20 days at 10 days after seed emergence. Significant genotypic variation was observed for leaf area(LA) and total dry weight (TDW). At the end of water stress, LA and TDW of Hwanggeumkong and Paldalkong, which had large LA in the non-stressed control, were more sensitive to water stress than those of the other cultivars, while those of Suwon 93 with small LA were insensitive. Leaf proline and abscisic acid(ABA) contents increased after water stress. However, changes in proline and ABA contents were not consistently related to the changes in LA as affected by water stress. As the soil water potential decreased, the yield reduction of Hodgson 78 showing large decrease in LA and TDW in response to water deficit was severe when compared to that of Baegunkong with small decrease in LA and TDW. Relatively greater yield stability and higher average yield across soil water potential were observed in Baegunkong. Of specific interest was the small reduction in yield of Paldalkong in spite of its significant decrease in LA and TDW.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.613-622
• /
• 2012

A chrome absorbent that is useful in rapid magnetic recovery and recycling was developed though a synthesis of Multi-Terminalized Magnetic-core Dendrimer (MTMD). Divergence through coprecipitation and rotation growth was used for synthesis. The dendrimer was multi-terminilized through methyl propionate and glutaric acid. The property analysis of the synthesized sample was performed through XRD, FT-IR, TEM, EDS, TGA and zeta potential analyzer. A magnetic-core of MTMD had a magnetite crystal and the size of 4th generation dendrimer was identified to be from 15 nm to 20 nm. Through the analysis of the TGA, the rate of the dendrimer branch for the first generation dendrimer was about 7% and 3% of diminished weight occurred as the generation grows. Also, the potential of the dendrimer when multi-terminalized, had variation from 25.26 mV to -6.53 mV. As a result of MTMD adsorption experiment, it absorbed more than 80% within 5 minutes and indicated absorptivity of 6.308 mg/g. When it was compared with COOH Dendrimer (COOH-D) after magnetic recovery, the recovery time was rapidly reduced by more than half and it could recover 100% within 30 minutes. In case of the regeneration experiment that used chrome, it was identified to maintain the same adsorptivity for four runs.

• Analytical Science and Technology
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2011

We described an estimation of measurement uncertainty in quantitative analysis of 11-nor-9-carboxy-${\Delta}^9$-tetrahydrocannabinol (THC-COOH), the metabolite of ${\Delta}^9$-tetrahydrocannabinol, in hair samples by using the bead-assisted liquid-liquid extraction and gas chromatography-tandem mass spectrometric (GC-NCI-MS/MS) detection. Traceability of measurement was established through the use of reference materials, calibrated volumetric tubes, volume measuring devices, and measuring instruments. The analytical results were compared and the different contributions to the uncertainty were evaluated. Inter-day variation was performed by using statistical analysis of several indicative factors. Measurement uncertainty associated with the analyte in real forensic hair samples were estimated using QC data. The major factor of contribution to combined standard uncertainty was inter-day repeatability, while those associated with preparation of analytical standard and also sample of weight were insignificant considering the degree of contribution. Relative uncertainty of relative extended standard uncertainty divided into the measured concentration of the analyte was 17% in a hair sample. The uncertainty of result evaluation will be invaluable to improve quality of the analysis.