• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1069-1074
• /
• 2014

In this study, the piezoelectric characteristics of a piezoelectric paint sensor were investigated in relation to the poling time. This piezoelectric paint sensor was composed of PNN-PZT powder and epoxy resin with a 1:1 weight ratio. The dimensions of the paint specimen were $40{\times}10{\times}1mm^3$, and the top and bottom sides were both coated with a silver paste to create electrodes. During the poling treatment, the poling time was controlled to examine the effect of the piezoelectric properties, while the poling temperature was fixed at room temperature and the electric field was set to 4 kV/mm. The piezoelectric properties were measured by comparing the output voltage from the paint sensor to the force signal from an impact hammer when the impact hammer hit the specimen. In conclusion, the optimal poling conditions were found to be an electric field of 4 kV/mm and a poling time of around 30 min at room temperature.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.51-59
• /
• 2004

An experimental procedure to identify failure modes of impact damage using sensor signals and to analyze their general features is examined. A series of low-velocity impact tests from low energy to damage-induced high energy were performed on the instrumented drop weight impact tester to monitor the stress wave signals due to failure modes such as matrix cracking, delamination, and fiber breakage. The wavelet transform(WT) and Short Time Fourier Transform(STFT) are used to decompose the piezoelectric sensor signals in this study. The extent of the damage in each case was examined by means of a conventional ultrasonic C-scan. The PVDF sensor signals are shown to carry important information regarding the nature of the impact process that can be extracted from the careful signal processing and analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.174-183
• /
• 2008

In this paper we design and implement a sensor network management framework(SNMF) for ubiquitous sensor networks(USNs). The SNMF employs the policy-based management approach for the autonomous and energy-efficient management of USNs. Moreover, a new light-weight policy distribution protocol called TinyCOPS-PR is designed and USN PIB for low-level policy is also defined. This allows the high-level policies defined by an administrator to translate into the specific low-level policies. The low-level policies are executed on sensor nodes so it can fulfill the proper management actions. The sensor nodes that receive some policies from an administrator perform local management actions according to those policies. SNMF can therefore realize small energy consumption and bring long network lifetime. It can also manage USNs automatically with a minimum of human interference.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.551-556
• /
• 2018

In recent years, drones have been used to measure aircraft flights data and weather information. Related applications include the measure for low-altitude atmospheric data, the measure for atmospheric fine dust, and the measure for air pollution. However, the mounting position of the atmospheric measurement sensor should be mounted by considering the effects of propeller flow, the EMI effects, and the changes in the weight of the drone. Among these, the upper flow of the propeller affects the wind speed and direction, so the optimal position should be selected. This study deals with the proper height of the atmospheric data measurement sensor. Through the flow analysis, we study the flow characteristics of around a drone and suggest the proper sensor mounting height.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.21-28
• /
• 2004

We have demonstrated a low speed weigh-in motion system using FBG sensors and performed field test at a trial road. Technique, called identical chirped grating interrogation, have used for a demodulation relying on the mismatching of two identical broadband chirped gratings. We compensated the fluctuation of LED power and the temperature of sensor and used a lock-in amplifier to reduce effect of noise. We could design a bending plate that the measurement results are independent of position of weight. The FBG sensors weigh-in motion system showed linearity and reproducibility.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.193-202
• /
• 2012

In this paper, we propose a new approach for compact range sensor system for real-time robot applications. Instead of using off-the-shelf camera and projector, we devise a compact system with a CMOS image-sensor and a DMD (Digital Micro-mirror Device) that yields smaller dimension ($168{\times}50{\times}60mm$) and lighter weight (500g). We also realize one chip hard-wired processing of projection of structured-light and computing the range by exploiting correspondences between CMOS images-ensor and DMD. This application-specific chip processing is implemented on an FPGA in real-time. Our range acquisition system performs 30 times faster than the same implementation in software. We also devise an efficient methodology to identify a proper light intensity to enhance the quality of range sensor and minimize the decoding error. Our experimental results show that the total-error is reduced by 16% compared to the average case.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.353-364
• /
• 1998

This paper describes the design processes and evaluation results of a small-sized six-axis force/torque sensor. The new six-axis force/torque sensor including S-type structure has been developed using a parallel plate structure as a basic sensing element. In order tominimize coupling errors, the location of strain gages has been determined based on the finite element analysis and the connections of strain gages have been made such that the bridge circuit with 4 strain gages becomes balanced. Several design modifications result in a similar strain sensitivity for six-axis forces and moments, and the reduced coupling errors of 2.6% FS between each forces and moments. Calibration test results show that the six-axis load cell developed which has light weight of 135g and the maximum capacities of 196 N in forces and 19.6 N.m in moments is estimated to be within 7.1% FS in coupling error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1628-1634
• /
• 2011

With the advancement of ubiquitous computing technology, u-Healthcare (i.e. ubiquitous health care), is regarded as a key application for information society, which provides health management service at anytime in anywhere. To implement U-Healthcare system, it is essential to monitor stable biological information in daily life. In this paper, we proposed a small size, light weight, patch type real time temperature monitoring system based on wireless sensor network (WSN) technology to monitor patients' body temperature without any inconvenience of activity.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.176-181
• /
• 2009

This study is part of a project to develop and improve mooring systems for oceanographic use that include an electro-optical sensor, 1MHz Nortek Aquadopp Doppler Profiler and AIRMAR multipurpose Sensor. The adaption of Doppler current profilers to measure directional wave spectra has provided a new instrumentation approach to coastal and nearshore oceanographic studies. The HEIOB is developed are light weight and of a compact design, and can be easily installed in marine environment. Since there are no base station and gateways in marine environments, we selected CDMA and Orbcomm to send the data information. Therefore, the data can be sent by either e-mail service or Short Message Service (SMS). This paper will present some of scientific sensor results regarding real-time oceanographic and meteorological parameters such as wind spend, wind direction, wave direction, and etc. The modeling and test results highlight the engineering challenges associated with designing these systems for long lifetimes. It can also be used in future application to build wave observation buoy network in real-time using multiple ubiquitous buoys that share wave data and allow analysis of multipoint, multi-layer wave profiler.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.938-948
• /
• 2005

Localization in wireless sensor networks is to determine the positions of all nodes based on the Down positions of several nodes. Much previous work for localization use multilateration or triangulation based on measurement of angles or distances to the fixed nodes. In this paper, we propose a new centralized algorithm for localization using weights of adjacent nodes. The algorithm, having the advantage of simplicity, shows that the localization problem can be formulated to a linear matrix equalities. We mathematically show that the equalities have a unique solution. The unique solution indicates the locations of unknown nodes are capable of being uniquely determined. Three kinds of weights proposed for practical use are compared in simulation analysis.